Pavilion HPE-552SC: HPE-552SC and ASUS GTX750TI - will not get past the BIOS

Similar Questions

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

  HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

  I installed Windows 10 once again. After installing HP Support Assistant work.

• Files and folders-photo will not delete, keep the reproduction

  Windows XP, Internet Explorer 8,.

  I try to delete multiple photos and whenever I hit ctrl, hold down the key and left click on photos, remove, they breed

  and now I have more than 68 copies of less than 10 images, help!

  Windows XP, Internet Explorer 8,.

  I try to delete multiple photos and whenever I hit ctrl, hold down the key and left click on photos, remove, they breed

  and now I have more than 68 copies of less than 10 images, help!

  ==============================================
  Unwanted copies have file names with
  copy "prefix of"?

  Example: Copy of IMG_1455.JPG

  If_yes_maybe the following tutorial, I wrote
  for XP offers a few ideas:

  Also... There is a link to another method
  at the end of this tutorial.

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Oooops... multiple copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

  Also see the following article:

  Trouble fixing: stop Windows copy
  Files accidentally when Ctrl-click selecting
  http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/

• Why the processor info and his memory will not display on the properties of the computer.

  When I go into properties of the computer, the processor information and memory installed in not illustrated, the fields are empty or say no information available.   How can I fix it?   I can see the processor information using Device Manager.

  In addition, SYSTEM side is not displayed but I see when I select the tools and performance information.

  The computer seems to work fine otherwise, I just want to know how and why the information is not seen in the System Properties screen.

  If the system is stable and functional, I don't think anything really to worry about.

• Error 17-Windows will not load past the splash screen, and system repair has no effect...

  Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

  Start "openSUSE 11.2 installer (NET)".

  (hd, 1)

  Specifien type is ntfs, partition type 0 x 7

  /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

  Error 17: File not found

  I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

  I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

  Thanks for any help!

  "Off my laptop the night before, an upgrade has been installed as usual."

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• 8.1 Windows and IE 11 will not play test the Flash animation

  I am running a fully patched/updated updated copy of 8.1 of Windows and Internet Explorer version 11 (on the desktop)

  If I try to run test movie to http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html , I get the following message:

  

  I've checked and checked that...

  • Flash Player is enabled
  • ActiveX filtering is disabled
  • Internet Explorer runs the latest version of Flash Player

  Can anyone give me any suggestions as to what I could try to fix this?

  Any help would be appreciated.

  

  Neil_O wrote:

  Thanks Mike,.

  The context in which it was that we have a web site where we have historically used .swf and .flv movies.  A couple of customers have "complained" that they could not see the movies and, when we have tried on Windows 8.1 IE11, nor could I.  This leads me to the Adobe test page, where I only saw the film of test if I have activated the Caompatbility Mode (as you suggest - thank you).

  Our web site will not make .swqf or .flv movies regardless of the mode of Campatibility.  Next, I suppose, is to see if we can at least restore some features - even if it is 'encouraging' users to enable Compatibility Mode.

  SWF and SWQF even become obsolete.  A year ago I stopped using video and Flash animations and moved to HTML5.

  1. they need any plug-ins. Even with IE11.

  2. they are mobile and Internet accessible from more than half of all traffic is now in mobile phones or tablets (which cannot and do not run Flash), it makes no sense to develop content that is invisible for many viewers.

  Compatibility mode is that only a "band-aid" for an important screws upward to MS. HTML5 eliminates the need for Mode of Comaptibility, eliminating the need for plug-in that they SAMU changes inadvertently disable.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• Horzontal and vertical lines will not get thinner then 1pt

  I work with illustrator for years and never came across this problem. If I do a perfectly horizontal or vertical line I can't lower line thickness then 1pt. If I rotate the line just 0.1 degrees so I can do similar less then 1 pt. When I turn the path back to 0 perfect or 90 degrees then it automatically changes the weight of the line back to 1 PT. someone else had this problem?

  Try turning off snap to grid of pixels in the transformation Panel.

• Pavilion 17-e003eb P:-laptop HP Pavilion 17-e003eb Notebook PC model #: E5U95EA will not be updated the BIOS level

  HP Support Assistant said I'm new updated including the BIOS, but updates blocked at the final stage, also happens to cyberlink photodirector, what to do? PS: anyone can give me the sp76846.exe so I can update manually?

  Nope. I opened it myself in the temp folder after the closing of the Task Manager.

• We just did the last Illustrator updated, and now Illustrator will not start, restart the mac doesn't seem to help, all of the problems after the update?

  any help is welcome, we lack the latest version of mavericks, first, that we have problems...

  Tim,

  Here is the update of Extensions suitcase 5 that may solve the problem.

  http://www.Extensis.com/support/product-support/Suitcase-Fusion-5/

• Pavilion hpe-112y: I have a hp Pavilion hpe-112y and would like to find the firewire port

  I have a hp Pavilion hpe-112y and would like to find the firewire port

  Looking at the back - #4 is the firewire port

  

• New HP Pavilion will not go beyond the screen with the "HP" Logo and the "circle of points."

  I recently bought a computer HP Pavilion (HP Pavilion 10:10 - e010nr). It was my first experience with Windows 9.1, but everything seemed to go OK. Then, yesterday when I had to retype my password, the computer began to run very slowly and then seemed to lock-up; It would not do anthing. I held onto the "button until the computer turns off and then restarted. When it restarted, it didn't go beyond the initial screen that shows "HP" in a blue circle and the small circle of the small white watch points there work but nothing ever happens. (I tried this many times, but the same thing happens. If anyone can help me to go beyond this opening "HP" screen, I would really appreciate it.

  Hi Referee06. I understand that your computer does not load past the HP logo at startup. To resolve this problem, proceed to the section "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" in this document: computer does not (Windows 8)
  
  Let me know how it turns out.

• Pavilion P7-1510: Get to the bios to enable impossible to reinstall

  I had a failed HARD drive and put a new one in but cant boot legacy options (DVD) I guess because the inheritance is not enabled in the bios. It is, all that I can see the bios info is not true bios. The f2/f10/ffffff type shows only information. Even escape will look at the boot options, but the legacy is not there. Is there a lockout on the bios?

  Try this link

  http://support.HP.com/us-en/product/HP-Pavilion-P7-desktop-PC-series/5330777/model/5331427/document/c03489643/

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario