Pavilion m7650n Sonic Software inoperative

My Sonic Software was completely inoperative and I went by a suggestion 'uninstall '. I did it and now I can't find out how to reinstall it. I only am not computer savvy so very please help. I called, but since I was out of warranty, it did not help me. I pray that you will help me. I liked my Sonic Software and I am lost without her. Thank you for your time.

Hello knownenemy,

What is the sonic software that you are trying to reinstall?

If you have removed the major programs on the computer, it may be a good idea to perform a restore.

A recovery will wipe everything off the computer, but fix any problems on the system.

Here is a link that explains a system recovery.

Please answer as much as possible.

Nice day.

Tags: HP Desktops

Similar Questions

  • no power to the Pavilion m7650n

    I have a Pavilion m7650n I bought 3 years ago.  When I went to put on today, there was no power to the switch (no blue light).  The green light on the power supply is on and I have confirmed that there is 110 VAC of the cord to the power outlet. This computer has the fuses - I have found none.   I suspect that food left.  Is there an easy way to confirm this?  How is it difficult to replace?  I have extensive experience in collaboration with the equipment electronic and am comfortable performing hardware repair/replacement.

    Thank you!

    Try this procedure and see if you can locate the problem. Troubleshooting problems of energy supply. Do not skip steps.

    The procedure below can replicate some of the steps above:

    Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

    How to replace a power supply.

  • HP Pavilion 27-n190st: software (disc) HP PhotoSmart 215 issue...

    A couple of years ago I bought a Hewlett Packard PhotoSmart 215 digital camera.  It came with a software disc with a program of type PhotoShop pretty cool and easy to use (on a separate disk).

    Over the years that I've updated the computers I always reinstalled this program.  I really like and likes to manipulate photos with it.

    Now I have updated a 27-n190st Pavilion and, apparently, it does not load the disc.

    Does anyone know why HP does not support their own HP software on one of their own HP computers?   Or how I can get this drive to load?

    On the cover of the disc, it reads ' hp photosmart 215 ""software camera","ArcSoft"" C8890-15300 ".»   I guess that this link I cannot download the pictures I took show a better description.

    Any help from your really smart computer people would be appreciated.

    Thank you!

    Thanks for the quick reply Banhien.  Much appreicated!

    I'll follow your advice and check it out...

  • Pavilion g6-1108er: software and driver results for: HP Pavilion g6-1108er Notebook PC

    Software and driver results for: HP Pavilion g6-1108er Notebook PC http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-1100-Notebook-PC-series/5082224/model...

    not download the driver on my laptop.

    We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. (c)

    Where can I get the drivers?

    Hello:

    It looks like all the drivers, specifications and manuals are missing from the pages of support again.

    This happened earlier in the week also.

    Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

    Whether the weekend will not help much either.

  • Pavilion dv4-1145go: software for the "other devices" in the Device Manager in a new installation

    After having rebuilt the laptop above with the new motherboard and the hard disk, I loaded a new copy of Vista using an ISO Setup disk and my COST. Everything seems perfectly.

    But I can't connect to my router, LAN or wireless. Realtek RTL 8101 E NIC driver appears to be installed correctly, but the network controller and several "other devices", for example: device Base system, SM Bus controller, etc need drivers.

    My dilemma is that I don't know what (s) to search for.

    In addition, while searc hing of HP Web sites, I was not able to locate the drivers available for this model of Pavilion. Just Web sites ask me enter the model number, then display the image of this model and ask again the model number. Pilots locations have changed on the HP Web site?

    Any help I can get will be greatly appreciated.

    At any time.

    Glad to be of assistance.

    Try the driver wifi directly from Intel.  You want the driver of first or second in service if you're running Vista 32 or 64 bit. Then download and install the first driver on a Web page.  You don't need the software if you let Windows manage wireless connections.

    14.3.009/03/2012Windows Vista 32-bitDownload
    14.3.009/03/2012Windows Vista 64-bitDownload

    ACPI\HPQ0004:

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870 & swItemId = ob_81492_2 & swEnvOid = 2096

    HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-61697-2 & CC = US & DLC = in & LC = on & os = 2093 & productOid = 3795304 & sw_lang =

    Semper Paratus!

  • Pavilion DV6 entertainment: software update the Pavilion DV6

    Madam/Sir.

    I own a hp Pavilion DV6 of Entertaiment, serial number; (Deleted content), product number; A7Q11EA, originally installed Windows 7 Home Premium, I decided to upgade Windows 10, strongly recommended by windows, but after a while the machine stopped working proply, sending a lot of warnings. I decided to go back to the original software installed but the phone asked a cd for a correct installation, of course, not having, that I found a copy of win7 Premium in which I installed in the hope of reaching to. I then reseached the net and discovered that a lot of windows, consumers have the same problem, at this point I don't know what to do could you please give me some advice on dealing with this problem? could hp provide me a copy of windows 7? If it would be useful if I could send the number of key windows installed originally on pc...

    I will be available at any time.

    Best regards

    Guido

    Hi @guido651,

    Welcome to the HP Forums!

    It's a great place to find answers and information.

    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

    Learn how to post and more

    I understand that after upgrade to Windows 10 of Windows 7 that you had problems with the laptop.  You tried to return to your original operating system, but was invited to the disc that you did not.  Then, you used a Windows 7 disc to reinstall the operating system.

    If you do not format the drive and remove the recovery partition, you can use it to perform a recovery to factory.  If you format the disk and the partition has been deleted and you need to contact HP support to acquire a laptop HP recovery kit.

    Here is a link to help you try the recovery.

    HP computers - performing a recovery of system HP (Windows 7)

    During the recovery process, there will be an option to backup your data to prevent loss, if you don't the have not made one and I would like now is the time.

    HP and Compaq Desktop PCs - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

    If you need to get the recovery kit, please contact HP to Contact HP Supportassistance.

    To say thanks for the reply please click thumbs up button below.

    If this Treaty your concern please choose the solution provided to help other posters.

    Good luck!

  • Pavilion DV7-7000 computer laptop: need to recovery my laptop Pavilion DV7-7000 software

    I need to buy recovery software FRO my laptop... where I can do?  Here are the specs.

    HP Pavilion dv7t-7000 CTO

    Serial number.         [Personal information]

    Product: A3F79AV

    Thank you

    Frank

    Hi, Frank:

    To order the recovery media for your laptop, click on the link below, select the OS from W7 in the menu drop down and the last line on the page is where you can order recovery media.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-7000-entertainment-notebook-PC-series/5226224/model/5273846

  • My Pc Pavilion and the software Hello?

    I have a fairly new HP Pc. Pavilion Desktop with windows 8 is installed. I wanted to remove some fat and I was wondering if the program Hello on Add/Remove programs is an essential service.

    While I have your attention is the Cyberlink Media Suite which comes packaged in a trial or free for life?

    Thank you very much!  Jack ":-D.

    I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
    Find thumbs upward, then click on to a KUDO
    Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

    jnepoore,

    The Bonjour service is a program from Apple. It is a program that detects computers and programs/devices on computers that are within a computer network. It is supposed to make communication between the most effective apple devices. That said, if you have any apple devices connected to the network, it used to hurt to keep it on the PC.

    CyberLink Media Suite is a free software provided by HP. I suggest you keep up to date.

    I hope this helps.

  • Pavilion p6610f Desktop: software blocking Wifi transmission

    Pavilion p6610f Desktop 64 bit Win 7 Home Premium SP1.  I had problems with the buffering and freezing in my browsing on the internet. I contacted my Internet provider after doing all the clean to the top of my computer that I knew how to do. After an hour or two with the agent to remote access to my computer and them telling me that everything was going well at their end, I asked why the icon Wifi in my taskbar shows only two bars on a possible 5 when my computer is right next to my Wifi modem? I was told it was probably a software interfering with the Wifi transmission.  I ran Microsoft malware and adware programs removal & Ms. Mr. Fixit.  I have MS Security Essentials and have not all problem reports.  My provider Internet telling me the truth?  Is the lack of Wifi reception with software that I can't find? I looked in my programs & features and does not see all unauthorized programs may have snuck in and I deleted some. The only thing that is new is a HP Envy 5660 all-in-one that is set up wireless.  It has been suggested that I have reformat my hard drive and reinstall the essential programs to see if that helps. But, acckkKKK!  I don't want to go through all that again! I did twice before and have installed two others had readers since I've owned this computer and don't want to if not necessary!  I thank in advance for your time and your knowledge if you decide to advise me.

    Hi there @TY965

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are getting a signal strength wireless low, despite the close proximity. I'm happy to help you with this.

    In some respects, being too close could be part of the problem. Because of the arrangement of the devices, it could be that the receiver on your desktop does not receive a clear signal, due to the metal in its framework. I suggest moving the router wireless in the location and see if you can get a better signal. This page has also some other useful information which may affect the strength of the signal.

    How to get a better Wireless Signal and reduce interference of wireless network - howtogeek.com

    If that does not help or make a difference, then you can try looking at your system itself. Start with the next page, and if there is no improvement, wok your way through the other sections, I have included, until it is resolved.

    Troubleshooting your wireless network and Internet access (Windows 7)

    Focus on the management of feeding your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget the network: (Windows 7)
    1. press start.
    2. tap manage wireless networks, click on the application at the top of the start menu.
    3. right click on the network, and then click on remove network.
    4 confirm the warning by clicking OK.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here, but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    I hope that this help and if anything here solved your problem, please mark this message as a solution.

  • Pavilion dv2: need software maintenance and diagnosis to check the hardware components of the computer laptop all the

    The bad news is: I recently left my HP Pavilion dv2 Notebook PC to the security of the airports in Europe. The good news is: it was located and returned to me (almost a month later) in the United States.

    Of course, along the way, he has not managed with 'tender loving care' I always gave him. He passed through several airports, temporarily, stopping in several departments lost & found... The final package (US Priority Mail with bubbles air, etc.) has been slightly damaged when I received it, even if no internal damage was apparent and the laptop seems to work OK.

    This laptop is used rarely; for the most part a few times a year when I travel. I don't want future surprises when I'm away from home without other 'resources '. I feel much more comfortable if I could give him a thorough training in order to ensure that there's no "shaken loose" or something else. Of course, it would not guarantee 100%, but it chill my mind.

    Software maintenance/diagnostics monthly, to check all hardware variety, would automatically go on my old HP desktop computer. I can't find something similar on my laptop.

    Any recommendations?

    Hi @jarhtmd,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv2 Notebook and concerns material, here is a link to a Hardware Diagnostic test.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Pavilion m7650n PC Media Center does not start XP

    1. model: m7650n

    2 product number: RF254AA

    3. product name: HP Pavilion Media Center PC

    The first error message is a black screen with white text:

    Windows could not start because the following file is missing or corrupt:

    \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Which suggests a corrupted registry.

    Unfortunately, the system does not boot the recovery partition (F10).

    I found that an article at support.microsoft.com/kb/307545 suggests starting the XP installation CD. I started a XP Media Center CD. That will load the drivers, but after saying Windows startup, he abandoned a BSOD:

    STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0 X 0 0 X 0)

    Suggest to change the SATA mode in the BIOS RAID, AHCI or IDE. None of this helps to either.

    Scanning of the hard drive on a well known system clean some viruses, but that has not changed the situation when you try to start the HARD drive again.

    Any ideas?

    Thank you

    Laboratory TimC

    Hi Tim,.

    Put the drive in another PC that you did before and back up your critical data. You can reformat the hard drive. Then reinstall the drive in your PC and set the SATA to IDE controller mode and save the setting. Reboot into bios and make sure that the resulting setting is saved.

    Now, reboot and use your HP recovery disks to return your PC to a first day of factory condition.

  • Just remove the Roxio/Sonic Software

    Hello.

    I have a Dell Dimension 9150 with Win XP Pro SP3, HL - DT - ST CD - RW GCE - 8487B, SONY DVD - ROM DDU-1615.

    Just remove/uninstall all software Roxio/Sonic?

    Work my cd/DVD without it? Is there other software that I can use instead of Roxio/Sonic, even if I have to buy?

    I'm sick of all the problems that (see are a wee) software causes me.

    Thank you

    Tony


  • 500-154ea Pavilion: Beats Audio for Pavilion 500-154ea software download

    Hello.

    I just had a new hard drive mounted as he failed a few months warranty on this desktop computer.

    The tech guy did a decent job of replacing the drive and re-loading 8.1 of Windows and other software of database back on and I have topped up all our files OK... but the Beats Audio software is missing. Mine was the guy with the graphic equalizer and configuration 7.1 etc so you can balance the speakers and void / etc.

    The sound works, but he obviously used a pilot of its channel low spec 2 generic no more volume set.

    I see not the software beats download on my desktop model-specific HP page and I was wondering if there was a generic download I could use?

    Also, I have seen on this forum links to other desktops download beats, but assumed that it might be the specific model?

    Any advice or links appreciated.

    Hello

    Try the following.

    As before, uninstall the current IDT HD audio software since its entry into programs and features and then reboot the PC.

    Then download the software package following IDT HD and Save in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58818.exe

    Then, if you do not have an extraction utility installed, download and install the Installer x 64 64-bit .msi for 7 - Zip at the link below.

    http://www.7-zip.org/

    One when you're done, open your downloads folder, right-click on the setup of the IDT HD software, select 7 - Zip, select extract files and then click Ok.  Open the newly extracted folder ( sp58818 ), open src, navigate to setup.exe (size 368ko), right click and select "Run as Administrator" to launch the installation.

    If this is successful, restart the PC.

    No sign of "beats".

    Kind regards

    DP - K

  • Pavilion dv7-6b78us: software of fingerprint for Pavilion dv7-6b78us with OS Win 10 to the finger

    I need software for fingerprint reader.  Active control panel, Device Manager and it says the drive is running and a driver curent.  Check installed programs and can find t.

    Hello:

    The only suggestion I can offer would be to see if the W10 Simplepass software works on your model.

    This package contains the HP SimplePass Identity Protection software for the notebook models and operating systems. This software protects the identity information and account access using fingerprint of the owner of the computer.

    File name: sp71729.exe

  • HP Pavilion DM4 - webcam software?

    Hello.  HP Virgin here

    I work with an organization that has a range of HP laptops and even if the built-in webcams work with Skype, etc the problem is that Windows 7 and 8 have been installed on these machines and the software installed at the factory existin today disappeared.

    Not fair to say there was a software factory for different uses of the built-in webcam?

    If so, can you point me in the right direction to reinstall it?

    Hi vegetarianator,

    I think what you're looking for is the following: Software Cyberlink YouCam - it's the webcam HP software offers for download.

    If you have problems with the webcam itself, I have also included a troubleshooting document you can keep on hand: HP Webcam troubleshooting

    Hope that helps

Maybe you are looking for