Pavilion P6-2310EF: Pavilion of the P6-2310EF Bios password

Similar Questions

• HP Pavilion model 17-1053us: invalid bios password

  My power on password, I put in the bios and use for several months, suddenly and for no apparent reason has become not valid. In addition, after 3 failed attempts with my password, it does not produce a stop code, it produces a 'hex' code How can I fix without having to pay HP? It is has got to be a way. Please somebody, ANYBODY! It is has got to be a way.

  I finally get a reply from You Tube and found pretty quickly. I had to unscrew each screw on the inside and the outside of the computer. Once you get all top separated, there is a printed circuit board, the mother I edge arise. I don't know, but anyway, there are 3 or 4 screws now the plate in place and those who had to be removed in order to get to the battery. The battery and the "principles 2 memory sticks" are under the plate. HP has gone to the extreme extreme to deter loyal customers access to sticks of memory and battery. It is not enough that we buy their products, they want to make it mandatory for us to pay for a package also. I won't do it! I arrived at the small round battery, he went out, put everything back in place, with the exception of screws, booted the laptop and BINGO! No password BIOS more! Then, just after I joined and it has all started and ready go, I stopped and unplugged, the battery was already out, I started it with just the plug. Then, I put the small round battery back in its place and made sure everything is connected properly, put all the screws bit and I have my computer back. And that's how get rid you of a bios password that may be "invalid". The big question remains: "how in the hell a bios password, I put in me and I had to enter every time I started the laptop FOR SEVERAL MONTHS, suddenly become"invalid "? I never wait for me, I'm going to get an honest answer to this question, I will HP?

• Question about the Satellite A200 bios password removal

  Hello.
  I own a Satellite A200 - 1 KB which has a password on startup and I would like to delete the password.
  I tried to get into the bios setup but I can't turn it off from there and I tried holding the ESC and hold left SHIFT to start but didn't work as well.

  If someone could help woul be great...

  Hello

  Unfortunately you won´t get here of secret advice on the deletion of bios passwords because the passwords were intended to protect a computer from unauthorized access. Thus, the password for the BIOS of your laptop is more often sunk that leads to the only solution:

  Contact an authorized service partner and let the button remove the password. But don't forget that you will be charged since the removal of the password of the BIOS is not covered by the warranty. Each manufacturer made this way, otherwise it would be easy to steal a machine, ask someone from a forum, and then use the stolen computer.

  You know what I mean? Here´s a link to find the closest available ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  Welcome and good luck

• HP pavilion x 2 10-k077nr: bios password

  Hello all I buy the hp pavilion x 2 my friend, but it has bios password and we do not know the password after some time put the wrong password tell system off and show this code: 59120812 please help me with that I unlock this CDP thanks

  Try > 46888234

• Pavilion 17-f100nh: forget my BIOS password

  Please help me!

  My mother died and I did not use my phone for a month. Then I discovered that I had forgotten my BIOS password. I typed in it for 3 times, but I wasn't sure. I n ' know that there are only 3 possibilities.  I received a message "system disabled" and an E1828B35 code.  My laptop is a 17-f100nh Pavilion.

  I'd appreciate if you can help me.

  Hi Astra777

  You must call the HP technical support team

  1 share your proof of identity

  2. proof of purchase of your device

  3 universl UUID-Unique identifier

  On the sharing of the information above, you would be provided the MSC. BIN file with instructions

  that should help

  Concerning

  Happy2help

• Pavilion 17-e113dx: help with BIOS password

  Hello, I forgot my 17-e113dx Pavilion BIOS password, can you help me to reset it please?
  After three incorrect attempts, I get 83977864 error code.

  Thanks in advance.

  @mgrenteria

  Enter 32655260

• Pavilion c 589: manufacturer of Bios password for Pavilion 589c

  Hello, so I put a password for my setup, but I forgot it. I have reset the CMOS on my motherboard to the standards of the factory, but he always asks for a password. Is there any sort of password that I can use to access the bios and change it?

  Hello:

  The only suggestion I can offer would be carefully check the jumpers on the motherboard and see if there is a labeled to clear the BIOS password.  Could be labelled like this...  CLR/PSWD

  If you can find such a jumper on the motherboard, usually you would clear the password like that...

  To clear the password BIOS follow these steps:

• HP Pavilion TouchSmart 15-b100: System Bios password disabled 5976 9460 code

  Hi all!

  Could someone help me with the Bios password I need to type after trying 3 times and get the system off code 59769460?

  I know its running Windows 8, but I'm not sure of the version...

  I would be really grateful if someone could help me with this!

  Thanks in advance!

  JC4

  Hello

  Please try:

  46641466

  Kind regards.

• Pavilion g6: I forgot my bios password... .Pavilion g6 i5

  I can't start the new operating system... because I forgot my bios password.is there a solution for this problem

  @248

  The password screen, press enter 3 times and you should receive a stop code - enter the site below.

  https://BIOS-PW.org/

  Kind regards

  DP - K

• Pavilion dv7: need help with BIOS password reset

  Hello, could you please help I reset the BIOS password on my laptop. Key is: 63471748. Thank you!

  @Ryhel

  Sorry got so confused trying to help the other 5 at the same time.

  Enter 72559388

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Pavilion E018TX: I forgot my BIOS password

  Hello

  I forget my BIOS password.

  Previously, BIOS Locked by asking the password and at that time, I used the default password as 47141111 and I entered the BIOS. I changed the Pwd right there and I forgot now.

  I also tried with BIOS default Pwd 47141111 as before and now throwing error Code 79775129.

  @rameshe018

  Enter 66653109

  Kind regards

  DP - K

• Tecra A11 - 1EG - cannot be accessed after the supervisor setting BIOS password

  Hello, I would like to know if anyone can help?

  We have started to put a supervisor on our laptop Tecra A11 password so that our students can not set passwords on the hard drive, etc.

  To enter the BIOS and set a BIOS password, press us F2 that the machine starts.
  Then we go to the security option, then supervisor password.
  After entering the password we use twice, press us F10 to save etc.

  The machine starts ok and will windows smoothly.

  The problem we have now, is that we cannot go back into the bios at all.
  As machine starts support us on the "F2" key as before, but unlike previously the screen remains white and the "Toshiba leading Innovation > ' screen no longer appears."

  If we keep our finger on the F' key or continue pressing the laptop restarts just without ever get to the BIOS screen where I guess that get us ask the supervisor password that we set earlier?

  Is there another key, that we should be pressing that start the laptop?

  I would add that we have added a password of supervisor for the screen of security BIOS on three of our laptops and all three have the same problem.

  Thank you

  Steve

  I think this should be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.

  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

• Re: Remove the Tecra A8 BIOS password

  Greetings,

  It was purchased recently two used computers laptop Toshiba Tecra A8 with serial numbers Y6091612H and Y6091296H. Both were protected by (there not the possibility to go in the BIOS). On the Internet, I found the information he can reset the password by using the response code.

  Is it possible to get the response code?

  This code can obtain only authorized service provider. You as a person private will not be able to do it somehow.
  Contact the nearest Toshiba service provider in your country and explain the situation. They can help you and remove the BIOS password.

• Satellite A100 PSAA8U: How can I unlock the system - remove BIOS password?

  I recently bought a model of Satellite A100 PSAA8U - 0S 3033 at a yard sale. After changing the memory and the HARD drive (which was supposed to be the problem with the system), I came to understand, there was a password required before I can use the system. Assuming that this system was reported stolen by anyone. Is it possible to unlock it?

  Moreover, it also has a finger scanner.

  Hello

  You have a problem with BIOS password or maybe HARD drive password?

  > Assuming that this system has been reported stolen by a person

  Where you bought this laptop? In the PC store or as a second hand?

• How to reset the forgotten Equium BIOS password?

  Hey,.

  I just had my laptop repaired after 2 years and I forgot the password I put in as soon as it starts to boot the system, before you can enter the BIOS and mount options password etc.

  Is the only way to fix it by paying Toshiba to do? and if so, where should I send it and what would it cost?

  Thank you

  Hello

  I fear that you will not be able to remove the password of m.

  Only authorized Toshiba service provider could remove the password

  So, it seems that you must get in touch with the local ASP to get rid of the BIOS password.

  Welcome them

• Tecra M9: Does not start at the local network after the value of BIOS password.

  Hi all, I have configured a supervisor BIOS password on a number of Tecra M9s but later found that this does not allow books to be PXE started - and a number of them require now that rebuild.

  I tried pressing the cursor keys in the first screen flash "Toshiba" (with the device down icons), but this will not allow to select the boot device - it's as if the keys are not pressed.

  I also tried to get into the BIOS to change boot device priorities, but I can't just to get into the BIOS in a limited form - there is no prompt to enter BIOS password.

  In brief - how can I work around this? -J' I need to know how to get the BIOS to ask the supervisor password (pressing ESC then F1 at boot only gives me the 'limited' BIOS)... Or, how to get the laptop for a PXE boot with a BIOS supervisor password.

  Thanks in advance.

  Hello

  I would recommend pressing the F12 key, immediately after that the laptop has been powered.
  This would allow the start on-screen menu.

  Then choose the HARD drive as the boot source.
  Then you could boot into the operating system and could use the Toshiba HWSetup to clear the supervisor password.

  I guess the password is known to you