Pavilion p6230f Desktop PC: my HP Pavilion p6230f Desktop PC work on European electricity without a transformer?

I just moved to the Italy.   I had my HP Pavilion p6230f than Desktop shipped here from the United States with my other household items, and now I'm not sure what I have to plug it into Italian eletricity.  Do I need a transformer, or simply an adapter.  (Or, because I cannot find the power cord to the United States because I think that I threw it away, just a new power cord).  I'm not sure the electrical plug on my computer.

The label on my computer says the following (in the format):

Input AC 100-127 A V-6

50/60 HZ 200-240 V - 3A.

This could mean that it will work on Italian 220V/50 HZ, or it could mean I have V - 6 and it will not work on a transformer.

If I need a transformer, what are the electrical specifications of the transformer I need?

Hello:

Check the back of the PC closely where the plug goes in.

Is there a red switch to change from 110v to 220v?

If so, just press the switch-220V and buy the correct plug, you need.

You may need a small screwdriver to press the switch.

Tags: HP Desktops

Similar Questions

  • I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at * address email is removed from the privacy *.

    Thank you very much. I hope hear from you soon. Thank you once again :)

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at e-mail removed for privacy

    Thank you very much. I hope hear from you soon. Thank you once again :)

    You have a laptop. So try the right button on your touchpad. It work?
    If so, the only remaining possibilities are:
    1. bad mouse. Get a new one.
    2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

    P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Pavilion dm1 touchpad not working not

    Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
    In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
    Can someone help me please.
    Did all the updates that are offered by HP

    Hello Terry,

    Thanks for your help but the touchpad seems to be defective.

    I use a usb mouse.

    Kind regards

  • I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error.

    I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error. I tried everything I could but to no avail.

    Hi Sheryl,

    more information is needed for a better response from the community.

    Here's a generic convenience store to try:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    B Eddie

  • My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

    Original title: Audio output device

    My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

    Hello

    See if that helps you.

    Do a system restore to a date before you had this problem:

    "How to make a restore of the system in Windows 8 and 8.1" . "

    http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

    __________________________________________

    Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

    HP:

    http://WWW8.HP.com/us/en/drivers.html

    Also read this information from Microsoft and follow the steps there.

    'No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See you soon.

  • Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

    Original title: installing the aol software

    I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

    Hi Bruce,.

    Thanks for posting your question in the Microsoft Community Forum.

    Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

    This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

    You can see the AOL support article to install the AOL desktop software.

    Install AOL Desktop software

    You can also consult the support AOL article and check if it helps.

    Message: SNMaster.idx is missing

    If the problem persists, you can get in touch with the support of AOL for further assistance.

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office.

    Model F730 laptop and notebook product S/n CNF7415WH7

    I bought a laptop (compaq F30 us in the United States) and windows original vista came with the compaq laptop (bought in US). Now, I want to buy a desktop computer and sell the laptop without windows vista software. Is there a way I can install windows vista in my new office. I don't have the cd or the software with me key since they have not provided for me at the time of purchase

    Hello

    No there is no way, how the do, because the license of Windows Vista is part of the computer compaq laptop - this is the license OEM - and cannot be separated.

    (in case the laptop is broken and cannot be repaired, then the license expiresand cannot be used on another computer)

    LC

  • Desktop speakers work, but cannot hear the music or videos on you tube

    Desktop speakers work, but cannot hear the music or videos on you tube of my speakers

    Tommy, thank you very much for your detailed answer.  As you will see below, it has been fixed so simply!

    Ah - so basically the same thing that fixed the issue of the original poster as well?

  • How is it, my original keyboard does not work on my desktop, but works on my laptop? And my keyboard works for both laptop and desktop?

    Hello

    I have a desktop computer Windows 7 Home Premium 64-bit with an ASUS M4A87TD EVO motherboard. Recently, I have a problem with my Wired Saitek Eclipse PZ30AU keyboard: when I type, the typical button does not appear on the screen. In other words, the keys are unresponsive. The keyboard is turned on, if the office is enabled/disabled. Even if, at the time, while he was working, the light is always disabled whenever the office is off. I don't know why it is informed, even if the office is off.

    My wired mouse usb works fine. I even tried my USB adapter for wireless network in two USB ports, and I still have the signal, so I guess it works very well too. The on-screen keyboard works.
    However, I tried to connect the keyboard desktop on my laptop and for some reason, what works. I also tried to use a different keyboard on my desk, and it actually works.
    I downloaded the chipset, the driver M4A87TD EVO BIOS 2001 driver and a driver of NEC Electronics Corporation USB 3.0 controller. But first, I had to install the Akamai NetSession Interface. After that I downloaded all three files, I installed the chipset driver and USB driver in uncompressing them, by clicking on each file, by clicking on Setup. For some reason, the BIO 2001 pilot had only a ROM file, so I just deleted total. After installing and restarting the computer, the keyboard does not.
    I want to emphasize that, before even manually, download the drivers, I tried using WIndows Update to install all important and recommended updates. After the computer restarts, the guarded keyboard lights flashing on and outside.
    So, I ask two things:
    1.) how does my original keyboard does not work on my desktop, but works on my laptop? And my keyboard works for both laptop and desktop?
    2.) can I keep I have installed the drivers or uninstall them?
    Thank you.
     
    Original title: keyboard problem

    Hello

    This problem can occur because of incorrect keyboard layout settings.

    Please follow the instructions from the link and check that it works very well.

    Check out the link:

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab05

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • HP Pavilion P7 - 1254 PC: replacement of the electric cord and use

    Moving to the Italy and take advantage of my desktop HP Pavilion P7 1254.  Card said 10A 125V.  Can I buy a spare with 120-240V power cord or I'm screwed?

    Hello

    For a short stay, a normal tourist card will do the job. For long stay, I think get an Italian standard cord for it.

    Kind regards.

  • HP Pavilion PC 500-281: If a reovery disc done on a pavilion of 500-281 work on the same unit?

    Our Church bought 4 identical Pavilion 500-281 desktop PC from HP 15/08/2014.  Yesterday (30/08/2015) a hard hard drives in a defective systems. I called HP support and they want $399 to replace. I think to install a different hard disk, it nuking, and then by installing a recovery on the new hard drive.

    PROBLEM: I did the system restore which has no value.  If I do a recovery of the value of one of the other identical systems it'll work on one that has failed or is - sensitve serial number, in which case I have to order the set of HP?

    Thank you

    Bob Davis

    Thank you, Tom.  I'll give it a try.

    Lucette

  • HP Pavilion p6130y: does the work of ASUS NVIDIA GeForce 210 with the HP Pavilion p6130y pc graphics card

    Could what possible graphics cards you use with this pc? because I am looking for an upgrade that willl work with the 300 watt power supply

    Hello @DeAdEnDsHaDoW,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I read your post on the issue of the graphics card and wanted to help you!  I understand that you are looking to upgrade the desktop computer and wanted to know what might work.

    Here are the specifications of the product of the GeForce 210:

    Bus support: PCI Express 2.0

    Minimum system requirements power: 300 W

    Here are the specifications of the HP Pavilion p6130yproduct:

    Expansion slots: 1 PCI Express x 16

    Power: 300 W

    Based on the above information, the Bureau should have sufficient power to use the card.  However, you may experience a lack of performance, because of the PCI ports.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • FINGER PRINT BIOMETRIC ON MY HP PAVILION dv6 NO longer WORK AFTER REINSTALLATION o/s

    The portable biometric finger print on my HP Pavilion dv6 PC device does not work.

    I get the message:

    1. the fingerprint reader is not detected (during startup before connect you).

    2. Windows has detected none of the biometric devices on this computer (when I checked via Control Panel).

    I went into this challenge when I reinstalled my OS windows 7 after I realized that I had some corrupted files and could not install HP printer on my computer.  Unfortunately, I don't have the original restore file so I had to reformatting and reinstallation of the o/s.

    Help, please.  My operating system is Windows 7 ultimate.

    CECOM,

    You have an older model of the dv6 series.

    Your computer wants to turn the Digital Persona of the security of the software version.  During their early years, HP sometimes referred to as HP SimplePass RFP software; the programs are actually two pieces of code and are not associated with another, except that they are doing a similar job and both do not use a fingerprint device driver.

    You want to install the driver of device fingerprints first on this page: fingerprints of validity sensor driver

    Restart the computer and log in.

    Then, install the Digital Persona software from this Page: HP SimplePass by Digital Persona

    Restart the computer and log in.

    The fingerprinting program should appear - I think (it's been several years I saw him) in your bar tasks, or perhaps as an icon on your desktop.  Click to open and start.

    I think there is a built-in Help file, too.

    There's a little more: you want to export your webcards (passwords and Web pages).  When you get up the fingerprinter configuration, I think backup (in this version) is under "backup and restore" in the lower left corner.

    Good luck!

    This can help, although I'm not sure about the content, or if it relates to your version of RFP:

    Using the HP SimplePass (Windows 7, Vista) fingerprint reader

    I am sorry to be so vague - I used to know what is good; It has been long since I supported this package and my DP V5.2 release notes are lacking.

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

    HP will never call on the phone and ask for money to 'secure your PC.

    Say "No, thank you," and hang up.

    Cybercriminals can call you on the phone and claim to be from Microsoft.

    See: Microsoft Security & Security Center

    Mark my answer "accept as Solution" when providing a solution or workaround!

    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

    Click on the thumbs-up Bravo !

    It's a nice way of saying 'Thank you' for help.

    While I strive to reflect best practices of HP, I do not work for HP.

  • HP Pavilion AIO: Camera stopped working for windows welcome

    The new AIO Pavilion came back with Windows 10 months and I used facial recognition to open a session.  All fine until 1 week ago, when the home screen says now "preparing...". "and"can't turn to the camera. Use the PIn to connect.

    If I go into RealSense, the camera works very well.  Windows settings for the camera are all lit, so nothing seems to have changed.

    What is a recent update of Windows 10 which changed the signal to the camera?  If so, how I restire it?

    Hi there @DavidG6,

    That the Forums are with you!  I understand that your web camera does not work properly for connection purposes.  I'm happy to help you with this.

    Assuming that it could be a recent update of Windows 10 which is the culprit, you can try using a computers HP - use Microsoft System Restore (Windows, 10, 8) to return to the level of before the problem appeared and see if it works now.  If so, then it is likely a change in software to your system.  Once you have determined that, then you can check: How to prevent Windows 10 to automatically download updated -howtogeek.com, prevent this set of updates.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

Maybe you are looking for

  • multiple inboxes in Thunderbird

    I just upgraded my office from 32 to 64-bit windows 7. I downloaded the latest version of Thunderbird and the fact that I have done many times before to copy all my TB data to the new profile.Everything seemed OK, until I tried to click on a hyperlin

  • Is that zero really a zero?

    I read from a USB-6008 using DAQmx. I was reading the device as fast as I could in a loop for, but I got a zero casual in the data. By adding a 1 millisecond in the loop delay, I was able to reduce the amount of zeros being played. My question is, ho

  • computer HP mini 1000: the password of bios hp mini 1000

    Somone can you please provide the password of the bios for my computer hp mini 1000. Fatal error: cnu9230f8p

  • V4.3 BEFSR41 router

    Hello, for the past few weeks I have been having some very slow performance with this router, web pages load and play games online... I decided to update to firmware: FW_BEFSR41v4.3_2.00.4.5_20080603_code The firmware has been upgraded, the router ap

  • Do my 8610 the default printer

    I have installed and uninstalled my new printer at least 3 times.  When installing, I had a default error message could not be set.  Now when I go into Control Panel, it will not put a check mark next to the printer to make it the default.  I did not