Similar Questions

• the area around my picture has changed from black to blue.  How to bring back the dark.

  the area around the photo of my painting has changed from black to blue.  I need to be black.  Help the artist.

  I'm using Photoshop 11.  Thanks I will he give a try.

  Yay, it worked!  Thank you very much!!!     help of the artist

• the images show black with red and blue sections on importation

  Newly installed 5 Lightroom on new computer (HP ZBook with 4 k screen).  When the files are imported from SD card on the display main and previews images are mostly black with some red and blue areas.  I tried disabling autotone and indicators of clipping and tried disabling GPU and the changing screen resolution - nothing helped.  I can see histogram and use the sliders to change the picture a bit, but can "lead to normal. The same images of this SD card are fine in Lightroom on my old computer.

  What can I do to fix this?

  Thanks, Paul

  This looks like a bad monitor profile. You must re - calibrate your monitor. If you do not have a calibrator, go to the properties of your monitor (it looks like the right of windows) and remove any profile associated with the parser. That do Windows will take your monitor is sRGB. This should solve the immediate problem, but it is always recommended that you calibrate your monitor with hardware calibration.

• Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

  HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

  Hi fejevitzky,

  Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

  Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

  HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

  http://WWW8.HP.com/us/en/store-finder/index.do

  Contact information:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Contact HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP SmartFirend Services: (I saw with the price of the service)

  https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

  Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

• HP pavilion p6777c: what upgrades would work better with my system

  I have a Hp Pavilion p6777c and I love the update for my children and a woman who plays world of warships, world of tanks and of second life what hardware upgrades can I do and stay within my budget of less than 400 dollars?

  Indy76, welcome to the forum.

  The processor is good.  I do not recommend change.  You can add more memory.  This is recommended by Crucial memory memory .  In addition, if you want to increase the speed, a new SSD better.  The essential link, he recommends SSD.  The MX200, 250 GB, SSD for $99 would be very good.  There is a guide for upgrading to a 2.5 "SSD in to the lower left corner of the page.  You would need an adapter to install a 2.5 SSD "in a 3.5 drive Bay".  If Crucial recommends they guarantee that it will work.

  If you upgrade the video card, you will also need to upgrade the power supply (PSU).  The most recent video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  The last series of video cards that does not need UEFI was the GT of the 640.  If you like the card, I recommend that you contact EVGA Tech Support (1-800-880-3842) in order to ensure that it will work on your computer.

  I love Of the PSU from Corsair.  I recommend at least 500W.  It would give you some excess power for maximum use.  The one in the link is modular.  It allows you to use only the necessary cables for a better air circulation.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Façade has stopped working properly on the Qosmio X 300/305

  Greetings and thanks for reading,

  I had my computer not a week ago and since then, I had some problems, especially with a blue screen when I hit the FN key. Research on the problem, I disabled services of Toshiba and eventually found the culprit: hwsetup.exe. Manual execution crashed my computer and it still doesn't work. However, after you install a new version of it, it seems that FN is working fine now. Hwsetup running always breaks the computer well.
  Any ideas what may cause this? The computer is new, so I don't see what I could have done to cause this situation myself.

  Now to the following problem: it seems that the façade has stopped working correctly, the touch of the keys that allow you to launch the application Dolby, the webcam application and also turn on and off the red lights on the keyboard. When I click on the touch keys, all I get is the tone of the speakers, but nothing happens. I guess I have disabled something by mistake. Any thoughts?

  I would be grateful any entry immensely, people, so please share your theories with me. It is such a thin laptop and I can sleep now, it's difficult to to cause these problems... ridiculous, Yes, but I want everything to be perfect because I spent so much money.

  Best regards
  Johan

  Hello

  > I can't install the flash card value as well as the utility driver package. It's actually the cause of the blue FN screens. I'm really lost here.
  First of all, you should check if the BIOS version you are using is the most recent.
  If this isn't the case, update the BIOS.
  Then, you must install the utility to Support Flash Cards because this utility is necessary, to get other utility Toshiba works.

  Then install the added value package because it contains the Driver TOSHIBA components common that is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  It also contains the TOSHIBA Flash Cards tool that provides Hotkey function and function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  If the BSOD will always appear that it is advisable to recover the operating system

• Pavilion Slimline expansion for 7520 printer cable

  The cable connecting the 7520 printer and the HP Pavilion computer may be about ten feet and must he USB and USB 2 or 3 connectors or shorter cables can be connected with a male/female adapter?

  10 to 15 feet is about the maximum distance should be a USB cable. USB 2 is fine for most printers. I advise to use only one cable... If you can, avoid the "extensions".

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• My iPhone 6s has lines of black border around the screen. Is this normal?

  My iPhone 6s has lines of black border around the screen. Is this normal?

  A screenshot would help us see what you see.

• Re: Satellite P15-s470: where the video cables (black & white) connect to mobo?

  Hey people,

  I'm trying to back a p15-s470 I came across not assembled.
  I picked up a new motherboard and install and I try to pull up this laptop.

  My problem... where video cables (black and white wires) to connect to the motherboard?
  Which side and where on the plate are taken?
  For the life of me I can't find the connection points.

  Thanks for any help. Very happy.

  Can also meet [email protected] if you might have pictures of places that would help also.

  Hello

  Well buddy laptop disassembly is not really easy it s especially delicate as you already know ;) there are many cables and screws.

  I googled a little bit in the internet and found this picture:
  [Pic1 Satellite P15 | http://www.irisvista.com/tech/laptops/toshiba-satellite-p15/big-mobo/satellite-p15-disassembly-13.jpg]

  I don't know if it will be useful, but it shows the cables that are connected to the mobo m
  Other cables seems belongs to antenna WLan

• What causes certain elements "saved" in the files to the 'blue' color while some has the color "black"?

  What causes certain elements "saved" in the files to the 'blue' color while some has the color "black"?

  Blue are compressed.  Are not blacks.

  Good luck

  K

• my hp Pavilion dm1 entertainment pc, has SPACE DISK LOW

  my hp Pavilion dm1 entertainment pc, has SPACE DISK LOW... It is said that my (e) HP_TOOLS is short of space.its becomes red already... I try to run d WinDirStat and here is the result.

  pls help. thnx! & more power!

  

  Hey, lmarie2002. If you notice in the screenshot that you have posted, there is a folder named MARIA-HP. delete this folder. It is a backup of your system and should not be on your E: drive/partition.

• my Panel code has a completely black background and I do not see how encoding can I fix it?

  my Panel code has a completely black background and I do not see how encoding can I fix it?

  CS5, windows, I don't even know how it changed? and Yes all the files but after 3 hours burned here at work, I thought about it:

  Before:

  1. Click on the button source code format
  2. Preference panel will appear > code coloring > default background

  FIX:

  Thank you for your answer

  Post edited by: Graphixqueen1

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• HP Pavilion Elite HPE-170 has Desktop PC - graph disc flashing - Normal?

  Hi all

  I just bought a http://support.hp.com/us-en/document/c01969875

  and I was wondering if the orange graphic of 3 discs piled on each other in the right upper part of the façade of the tower is supposed to flashes and turns off all the time?

  Or is it telling me that I'm supposed to do something?

  Hello BigBad64, while I'm not familiar with your system, the light you describe indicates the hard disk activity.

  Normally, that's fine because it flashes a little or even a bit, depending on what the system is doing at a given time.

  Even if you can not do anything, the drive hard activity can and cannot, turned on because of background running applications and services.

  There is also the possibility of Windows running the task of "Indexing", which is supposed to help with research on the system.

  I'd be too concerned about this, as there doesn't seem to be normal.

  I noticed that you mentioned that you just received this system. It was released in December 2009 for customers in Australia.

  This would be not for me either, just thought that it kinda weird that you have just recently.

  I hope this helps.