Pavilion P7 - 1380t: the four cables SATA H - 61 Joshua mobo SATA 1, 2 or 3? Also this mobo support will be RAID?

Similar Questions

• Re: Satellite P15-s470: where the video cables (black & white) connect to mobo?

  Hey people,

  I'm trying to back a p15-s470 I came across not assembled.
  I picked up a new motherboard and install and I try to pull up this laptop.

  My problem... where video cables (black and white wires) to connect to the motherboard?
  Which side and where on the plate are taken?
  For the life of me I can't find the connection points.

  Thanks for any help. Very happy.

  Can also meet [email protected] if you might have pictures of places that would help also.

  Hello

  Well buddy laptop disassembly is not really easy it s especially delicate as you already know ;) there are many cables and screws.

  I googled a little bit in the internet and found this picture:
  [Pic1 Satellite P15 | http://www.irisvista.com/tech/laptops/toshiba-satellite-p15/big-mobo/satellite-p15-disassembly-13.jpg]

  I don't know if it will be useful, but it shows the cables that are connected to the mobo m
  Other cables seems belongs to antenna WLan

• Is it possible to set up a printer wireless without the USB cable?

  Hello

  I have a HP Photosmart C4580 and I wanted to set up to run on a network, but I don't have a USB cable. I tried to install it without one, but it does not appear on the network, and I was wondering if you really need a USB cable to install it?

  Thank you.

  1. turn Radio on wireless to the printer.

  2. on your computer, search for all available wireless networks. You should find a named "hpsetup". Go ahead and connect to this network and ignore all warnings.

  3. wait 1 minute after have connected you to the network. Then, print a network of the printer Configuration Page. It should list an IP beginning with 169.254.x.x.

  4. type this address in the address bar of any web browser. You will reach the Embedded Server (EWS) Web of the printer.

  5 use the Wireless\Networking tab at the top and looking for an option to ' 802.11 wireless networks. On this page, you will be able to enter your network settings wireless (screenshot attached to facilitate their identification).

  6. make sure that you change the SSID for your network name. Click on the option button 'Infrastructure' and enter your WEP\WPA pasphrase. ENTER THE SSID AND PASSWORD EXACTLY AS IT IS, OR IT CANNOT CONNECT TO THE NETWORK.

  7. click on the button to apply and wait for the confirmation of the parameters being recorded.

  8 restart the printer. Once again the Config network printer page. Now, it must have a such IP assigned by your router and not with 169.254.x.x.

• Pavilion p6130y with the M2N7B - LA - no storage found-tried new drive in different sata-same result Pegatron

  Hello. Pavilion p6130y with Pegatron M2N7B - LA, Vista Home Premium 64 bit, Seagate Barracuda 7200.12 750 GB. Has stopped not working, with errors, none found in storage. Cable sata switched to other ports-same results. Bought the new Seagate hard drive and tested with new cables and ports with the same results. Taken to the technicians at best buy have tested and said it was the motherboard and not the hard drive. I don't know how they determined it was the motherboard - guy looked at the jury and said Oh yes I see it now... etc. Is it possible that I can say that it is the motherboard? I know enough to be dangerous ) with the material. Told us that a new motherboard is about $600. -better to get a new computer. The computer is around the age of 29 months. Is there a fuse that could be replaced if found reason for blowing possible in the first place? Seems too early for a bad mother for me. Thanks for any help.

  Ah Ah! Your motherboard is the origin of the problem, not hard drives. If the system is out of warranty, chances are you would, but I always call and let them know you have a problem with the map of M2N7B - violet.

• four cables broken at the same place to date need Apple noticed to think the redesign

  So far, I have totally FOUR cables broken almost in the same place by cable. I think that the reason is the place damaged near connector for iPhone that could be easily folded frequently during the loading and reading. This is proven a 'stub' location must be recast to make it stronger. Thank you.

  Odd.  I nor anyone I know has had a cable fail.

• What is the difference between SATA and regular cables?

  I am a student in the article so I have a small doubt
  What is the difference between sata cables and normal

  "What is the difference between sata cables and normal."

  If by "normal" you make cables referring to the old SCSI or IDE/PATA cables in water it

  is a very big difference.

  SCSI (IDE/PATA are similar, but with the pins are connecting less) is the former cable style and support of the motherboard for the latter is way of disappearance on newer systems.

  

  SATA cables are used on the latest HARD drives and SSD and are supported by all the "modern".

  motherboards. The one in the photo was an end at right angles, but most are right.

  

  Two types of cable are used for HARD disk SSD and optical drives.

  BTW - As an IT student would serve you yourself well learn how to search the Internet for

  answers to these questions.

  .

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• HP Pavilion dv7 for the radiator/fan

  I'm trying to figure out how to disassemble my hp Pavilion DV7, but I cannot find anywhere how to do for my particular model. The precise model is

  HP Pavilion dv7-7121nr

  Hello

  I had this procedure for your model for the replacement set of heat sink of the:

  Fan/heat sink assembly removal

  CAUTION: Follow all precautions during the removal and replacement of components:

  http://h20574.www2.HP.com/Media/75D38F6E-BCDA-4E84-961B-F3BF5454EA2B/en/yea_fru_popup_precautions-en.htm

  Before you begin: remove the battery, the door, the optical drive, hard drives, LAN module wireless, RTC battery, keyboard, cover and system board.

  Disconnect the fan cable from the system board.
  Loosen the four Phillips screws P1 captive who set the heatsink to the motherboard in the order in which they are labeled.
  Because it is a map of the graphic system, loosen the three Phillips P1 additional captive screws that attach the heatsink to the motherboard in the order in which they are labeled.

  NOTE: Graphics system UMA cards do not contain these extra P1 Phillips three captive screws.

  Lift the heatsink off the system board.

  NOTE: Due to the adhesive nature of the thermal equipment located between the processor and the heat sink, closed effort may be needed to remove the heat sink.

  Fan/heat sink set replacement

  NOTE: Before replacing the heat sink, the thermal material should be replaced. The thermal material must be replaced each time the heat sink is removed.

  Carefully remove the old thermal grease from the heat sink, the processor and discrete graphics models, the graphics processor with an alcohol swab.
  The thermal paste applicator allows to apply a sufficient amount of thermal grease to the center of the processor and discrete graphics models for the GPU.

  Align the heatsink on the processor and the screw holes.

  Tighten the four screws P1 captive who set the heatsink to the motherboard in the order in which they are labeled.
  Because it is a map of the graphic system, tighten the three Phillips P1 additional captive screws that attach the heatsink to the motherboard in the order in which they are labeled.

  NOTE: Graphics system UMA cards do not contain these extra P1 Phillips three captive screws.

  Connect the fan cable to the system board.

  Kind regards

• HP Pavilion dv7-4285dx: the HP Pavilion dv7-4285dx upgrade hard drive

  Can I replace the stock 640GB hard drive in HP Pavilion dv7-4285dx with a 2 to or is there a limit of 1 TB?

  If not, I would like to add another hard drive in the second empty Bay, but don't see any plug for the extra cable in this notebook.

  Laurie

  Hi @LaurieJC ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-4285dx Notebook and want to improve the hard. Here is a link to your service manual page 48 for Hard drive specifications. I checked on the possibility of installing 1 TB and it shows me if you keep to 1 TB 2.5 internal SSD SATA 6.0 GB/s • 555 MB/sec in reading, 500 MB/s write plug, you'll be fine.

  I hope that this address your concerns.

  Thank you.

• HP Pavilion 500-311no: the hp Pavilion 500-311no upgrade

  Hp Pavilion 500-311no desktop PC, I bought a few years ago and now I feel like I would get some more power out of it then is it possible to upgrade this computer. I use mostly this pc for a game so what I'm looking to upgrade is the gpu. It seems that the motherboard supports the latest grphics cards and I think they should also fit the case. Incase of replacement parts, the power supply needs to be replaced probably as well. Also overclocking motherboard support and how the overclocking and replacement parts affect warranty?

  Greetings,

  You have some positives on your side:

  PCIe available x 16 slot 3.0.

  UEFI BIOS.

  Your chassis will limit the duration of the update of the graphics card.

  You have only a 300 Watt power supply.

  Most of the HP motherboards cannot be overclocked. I have a processor Intel 4820 K. HP offers limited overclocking abilities with this processor.

  Check the measurements on the existing power supply.  A diet of 600 runs most new graphics cards high-end. NVIDIA cards tend to require less energy than equivalent AMD cards.

  Check the height of the rear panel input/output where the x 16 slot is to determine the maximum length of a new card.

  Shop for a new card graphics and power supply when you know your limits. The high-end cards are usually double slot. Make sure you have room to install a card double slot. You need to be able to burst a second plate of input/output rear panel to install a dual slot graphics card.

  Modular power supplies reduce tangles of cables in the chassis.

  See you soon!

• Pavilion 17F1023CL: lost my ethernet cable connection.

  Have 2 pavilions and lost the ethernet connection, with cable, on one of them, yet have the wifi capability. When you attach the ethernet cable, the port light does not illuminate.

  Currently using my second Pavilion, with the cable is connected, and the light on the port is light.

  The problem would be with the connection/WiFi wireless card? This card Realtek manages cables and wireless?

  Prefer to do my own repairs when possible, as labor costs are far too high for my budget.

  Hey @dwflo,

  Please use the forums.

  Sounds to me like the port has been disconnected somehow, as it should be a combo wireless connection/WiFi card as you requested.  You can check to make sure that the port is still connected properly, however it is likely that it will need to be replaced.

  See you soon,.

  TechSurge.

• Desktop HP Pavilion 500-342nem: can I upgrade my desktop computer hp pavilion 500 with the graphics card AMD RX 480 replacing edge R7

  I plan to upgrade my hp pavilion 500-342nem, who was already A7 graphical 240 with the new 480 RX.

  Is it possible to upgrade both the power supply and graphics card?

  There will be no problem of compatibility (PSU Corsair CX 500 questioned?.)

  I heard a lot of chatter on hp restricting the upgrade of their pc.

  The new card will work?

  Any help will be apppreciated.

  @Jeffrin98, welcome to the forum.

  I cannot find the specs of the product to the computer.  So, here's what you need to do.  Press Start + R from the view of the office.  This will open a run dialog box.  In the box labeled type msinfo32 opened.  In the page that opens, check the option titled Mode BIOS.  If he says UEFI motherboard is supported by the video card.  If this isn't the case, you will not be able to move forward.

  The next step is to measure the space where the card will be installed to ensure that it fits.  Measure from the back i/o port to the front of the case.  This will allow you to see if other ingredients will limit the installation.

  The CX500 Corsair power supply (PSU) should work.  However, check how much power requires the video card.  It may be better to buy a PSU with 600W.  High power will be used during peak power needs.  In addition, the card may require additional power connectors.  Also, I recommend a modular power supply.  It allows you to use only the cables that are absolutely necessary, create better air circulation.  It is very important with more powerful graphics cards.  The heat can be much larger.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• A7F22A: New card video for HP Pavilion p7 - 1380t

  I need to know what video cards are compatible with the

  HP Pavilion p7 - 1380t

  If I can bypass the use of onboard video card external video.  Does anyone have a link?

  Brian

  Hello

  See thespecificationsto your PC and you will find a list of graphics cards HP OEM approved and certified.

  Apart from HP OEM graphics cards, NVIDIA GTX 660 is a choice of excellect to non-UEFI graphics card.  Remember the team with a 600 Watt power supply.

• Connect the hard drive SATA HP workstation xw6200 - 2nd / SATA controller card

  I run this system:

  Manufacturer: Hewlett-Packard
  Model: hp workstation xw6200
  Model number: DU937AV
  Categories: Computer....................
  Hitachi HUA721010KLA330 (1.0 TB) 3 1/2 "7200 RPM SATA 3.0 GB/s
  Sony Optiarc DVD RW AD-unit 7200 s ATA Device
  OS version: Microsoft Windows 7 Professional, Service Pack 1, 64-bit
  Processor: Intel Xeon processor 3.60 GHz, Intel64 Family 15 Model 4 Stepping 1
  Number of processors: 2
  RAM: Mb 8191
  Graphics card: ATI Radeon HD 5400 Series, 1024 Mb
  Hard disks: C: Total - Mo 953768, Free - Mo 911783;
  Motherboard: Hewlett-Packard, 08B8h

  Installing a 2nd HDD I have to install a SATA, two slots used SATA controller card. I would like to know which card to choose.

  I have 4 ports PCI available (#26) and 1 PCI Express x 8 first (#25) available. The two PCI and
  

  PCI Express SATA controller cards are available. Who would you recommend?

  Thank you for your help.
  

  Boyar

   

   

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]
  

  I'd rather than PCIe PCI for this purpose.

  HP liked SIIG for a number of their SATA PCI slot cards.  SIIG has updaters for these maps on its web site, and the pilots understand place in Windows 8.  Here's what I recommend if you want to only two new SATA internal ports:

  http://h30094.www3.HP.com/product.aspx?SKU=3062195&mfg_part=SC-SAT212-S4&pagemode=CA

  There is also a card HP SIIG eSATA that HP has used, and I have also used that... it worked great.  It has two eSATA ports and no port SATA internal:

  http://h30094.www3.HP.com/product.aspx?cache=2012565552&culture=en-us&SKU=2850719

  In addition, you can connect a single SATA hard drive on an eSATA port (the reader would need external power supply) for formatting, etc.  For that you need a cable with eSATA on one end and a connector type SATA internal regular on others... it is so much easier than to open the box and play with the internal cables.  The best quality I've found for those who are Macgurus.com or Granitedigital.com.  Opt for a shorter (1 m) rather than a longer therefor version if you choose to do so, in order to reduce the risk of interference (which I have never seen this):

  Macgurus told them are indicated for the generation SATA I, II and III, and they are a little cheaper for a length of 1 m of the granite.  Both are excellent companies.

  Finally, there is a HP SIIG PCI with combined eSATA/SATA, with a player external eSATA and SATA port internal:

  http://h30094.www3.HP.com/product.aspx?SKU=2850718&mfg_part=SC-SA1012-S1&pagemode=CA

  I'd stick with HP SIIG solutions and probably buy directly from HP for this unless you can find the same for much less expensive on eBay.  The cards have had several revisions, and I think that if you get your HP, you would later.

• Pavilion 15: upgrade the display panel

  You have a hardware issue.

  I bought a laptop HP Pavilion 15 - HP Pavilion 15 p051sq (ENERGY STAR) (J7U16EA) - last year and he has a very good hardware configuration

  Intel® Core™ i5-4210U, 1.7 GHz, 3 MB cache, 2 cores CPU with integrated video Intel HD 4400.

  8 GB SDRAM DDR3L, 1600 MHz (1 x 8 GB),

  HARD drive: 1 TB 5400 RPM SATA.

  LED bright HD BrightView 15.6 "display in maximum resolution of 1366 x 768,

  NVIDIA GeForce GT 840 M (2 GB dedicated DDR3).

  As you may have noticed, my question is the ugly resolution there is this Panel of HP laptop: led display 15.6 '' HD BrightView to 1366 x 768 max.

  Can someone suggest a replacement with higher resolution Panel?

  Energy consumption is not an issue here, as the laptop only stays at home in the area.

  Alternatively, can anyone suggest how to contact HP by telephone or to recommend a contact HP support, I can call for directions to solve this?

  Hi there @CosminT 
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you're looking to replace or update the display on your portable computer. I'm happy to help you with this.

  I understand the owner's manual as a reference, because it shows the replacement components supported for the series of laptops.

  HP laptop Pavilion 17 Notebook PC HP Pavilion 15 PC - Maintenance and Service Guide

  In this guide, you will find the following options available for 15.6 "screens which the third party only has a capacity of higher resolution:

  15.6 "HD WLED BrightView (1366 x 768) flat (3.6 mm) SVA (for nontouch SKU only) available for Windows 8.1 and Windows 7
  

  15.6 "HD WLED (1366 x 768) anti-glare flat (3.8 mm) SVA (for touch SKU only)
  

  15.6 "FHD WLED anti-glare (1920 x 1080) slim (3.2 mm) SVA (for both no touch & touch SKU)

  Another option would be to use an external monitor with your laptop, as in this case you can use any resolution that display the external supports and the graphic card of your laptop is capable of.

  If you want to talk to a support agent, you can call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.