Pavilion Slimline s5510y: network driver, the system disk

Similar Questions

• HP Pavilion Slimline s5510y of: No. Wireless Network Adapter installed

  I just bought a Pavilion Slimline S5510Y Desktop opportunity; not an installed wireless network adapter.   Y at - it somewhere that I can download the map?

  Here is the PAGE of SUPPORT for this office.  It doesn't have a wireless adapter.  It has a wired aka the installed ethernet card.  The wireless adapter is a piece of hardware and must be purchased, not downloaded.  There are choices in the type would work better for you - USB or PCI x 1.  It may depend on the type of network you want to use.  The new highspeed options may require an adapter corresponding to the specification of network router in order to achieve faster speeds of the AC.  If you look at the "n" speeds then most can do.  Also be aware of the bands 2.4 and 5 GHz for newer routers.  If all this sounds "Greek", then perhaps seek help from a friend.

• instalded new HARD drive, do not recognize the system disk

  I had to replace my hard drive. what I did. implement system sisc restarted.  no system found, just saying., what can I do to make the system disk.

  Of course there is no system found; It's a blank hard drive.

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• How to enable display of the State of the network in the system tray?

  How to enable display of the State of the network in the system tray?

  Hi barta75,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the display of the status of the network (on the system tray) on the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) you have the network on the system tray icon?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  I wish that you hover the mouse over the network icon and check the status of the network.

  Method 2-

  I would have you look at the article-

  Networking

  http://Windows.Microsoft.com/en-in/Windows7/products/features/networking

  Notifications and Notification area (Windows)

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/ee330740 (v = vs. 85) .aspx

  In addition, see the article-

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242#top

  We know if you need help. We will be happy to help you.

  Thank you.

• Disk drive cannot read the disc. The product is s5120f Pavilion Slimline. Windows 7 operating system

  I did the diagnostic tests, and the drive seems to work fine. I think I just need to clean the lens, as I've never cleaned. I need to know what kind of cleaning kit or drive to buy. I bought a cheap vacuum disc at Wal-Mart (Memorex) but it does not work in the PC disc drive - it has no brushes. A Utube video uses a 2-brush Phillips drive, but I want to confirm before buying another. Perhaps that the system 2-brush of cd/dvd lens cleaner SVC2330/27 Phillips? The recommendation is appreciated.

  Hello alhirt,

  I found a. He said that it is only a solution for lenses DVD-Bluray, but I heard that it is also a good solution for the computer lenses.

  If you already have one, good luck.

  Philips-SVC2340/10

  One year fabric warranty.

  I am pleased that help you

  samside1234

• Pavilion Slimline s3760a: hard to replace by disk drive cloning

  Product name: Pavilion Slimline s3760a

  OS: Vista

  Hi all

  I'm Turina, just joined the forum think I write in the right place, but I would like to know if I am not please.

  So we had our computer for several years, the hard drive is in red then am swapping try it before he died of old age, for a WD 1 TB hard drive.

  I use a Sata-usb adapter and the editing software Acronis True Image WD to clone the installed hard drive.

  It is only used at home, and we buy another for games, so it is just the usual photos, music, computer documents, type ftp and Web site stuff, but nothing too consuming.

  I don't think I have the original cd that came with the computer, so I do not have a cd of the operating system.

  Have already saved the computer several times so I'd go back to setting before changing the original hard drive?  No important stuff there that I can't get back.

  The questions are:

  1. The current drive is partitioned, the C: and the D: which is the original Image.  I want to know if I can clone the image factory separately to the C drive on different drives.  That is to say the image of origin on a disc and the rest on another disk.  Actually I don't know what is an original image, but after reading on this subject, I guess, it's the information to restore your computer to factory settings?
  2. If I can't clone separately, when I clone the drive will be the computer then be able to recognize the additional 1 TB or it will still recognize just aware of the 320 GB memory disks.  I know that you can enlarge the partitions don't etc. no idea how or even if I need to do this?
  3. And a separate SSD or same disc for the operating system would be more killing?  Actually I don't think I can put the operating system on a separate drive because I don't have the cd and don't know if I can do it with the cloning software.  But thought I'd ask anyway.

  Any help would be greatly appreciated.

  Thanks for your time

  Turina

  After you run the clone, this player can be connected with the drives original wiring (SATA and power data).

  This new cloned drive should start without problem. The original drive may be stored safely up to your satisfaction.

  A cloned drive is an exact copy of the original disc. It is intact, with all the programs and data files.  There is no further action required.

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Refurb new Pavilion Slimline s5610f, HARD drive advertised as 7200 RPM, watch 5400 RPM in speccy

  I don't know if it was just the misinformation on the Bestbuy description because it was a refurb or Speccy reading it wrong, but I just bought the refurb HP Pavilion Slimline s5610f was supposed to have a 7200 RPM HARD drive according to everything I read.
  This is the profile for HP http://h10025.www1.h...R1002_USEN#N455
  Here is the description of BB http://www.bestbuy.c...da914375cf8en02

  I looked around and everything indicates that the device of WDC WD64 00AAKS-65Z7B0 as being 7200 RPM SATA drive. Speccy also lists it as a 2 MB cache, which I don't think is correct, should be 16 MB, but I'm not too sure.

  Any help would be appreciated, as other ways to identify the number of towers disk and memory cache.

  Also wonder about this part of the form: data C7 Ultra DMA CRC Error Count 200 (177) 0000000019

  Who's 19 errors for the duration of the training?

  Of Speccy:
  Hard drives
  WDC WD64 00AAKS-65Z7B0 SATA drive
  Manufacturer Western Digital
  Business Unit / Desktop/WD Caviar® brand
  TR/MIN/Buffer Size or attribute 5400 RPM with 2 MB of cache
  Heads of 16
  16383 cylinders
  Type II-SATA 3.0 GB/s SATA
  Type of appliance fixed
  ATA Standard ATA8-ACS
  LBA 48 bit taken in charge
  Serial number WD-WCASYF167563
  Interface SATA
  625 GB
  full size 640,135,028,736 bytes
  Zero Type RAID
  S.M.A.R.T
  01 Read Error rate 200 (200 worst) features 0000000000
  03 spinup Time 162 (162) data 0000001324
  04 start/Stop Count 100 (100) data 0000000020
  05 reallocated sectors to count 200 (200) data 0000000000
  07 seek Error Rate 100 (253) data 0000000000
  09 hours (POH) powered 100 (100) given 000000001 B
  Spin Retry Count 0 to 100 (253) data 0000000000
  Attempts to recalibrate 0 b 100 (253) data 0000000000
  0c device Power Cycle Count 100 (100) given 000000001 has
  C0 Power-off retract count 200 (200) data 0000000007
  C1 Load/Unload Cycle Count 200 (200) data 000000001F
  C2 Temperature 118 (109) data 000000001D
  C4 number of events of reassigning 200 (200) given 0000000000
  C5 Current pending sector count 200 (200) given 0000000000
  C6, Incorrigible sector County 100 (253) data 0000000000
  C7 Ultra DMA CRC Error Count 200 (177) data 0000000019
  C8 write error rate / multi-zone error rate 100 (253) data 0000000000
  Temperature of 29 ° c.
  OK (less than 50 ° C) temperature range
  Good condition
  Partition 0
  Disk #0 Partition #0 partition ID
  Size of 100 MB
  Partition 1
  Disk #0 Partition #1 partition ID
  C: drive letter
  NTFS file system
  Volume serial number E4AF596B
  584 GB dimensions
  Used space GB 30.5 (6%)
  Free space GB 554 (94%)
  Partition 2
  Disk #0 Partition #2 partition ID
  Letter from D: drive
  NTFS file system
  Volume serial number 829DB1F3
  12.1 GB size
  Used 10.6 GB of space (88%)
  1.47 GB of free space on the (12%)

  Ask yourself why the unit was refurb can be intimidating. It's only cicra July2010.

  You perform these maintenance issues:

  Checkdisk http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/

  scannow http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm

• Pavilion Slimline s5260f: Tutorial reload operating system

  Hello

  This question asked several times very probably before, but in any case.

  Problems with a situation rather big virus.  The computer is totally infected and I tried antivirus download removel and running and also earsed the HDD by recoverary Manager to disinfect computer and niether work.   Recoverary drives to order my factory of windows 7.   I want to just reload the operating system again, but I am not sure how.   Can someone provide me with a tutorial please.  I use a Pc Pavilion Slimline Desk Top s5260f.   Regarding the assistants would be greatly appreciated.  Thank Jerry.

  Hello

  Thanks for the help.  Managed to clear the air.

• Pavilion tx1410us - error messages from the BIOS disk Test

  My first post here so greetings and a happy new year to all.

  I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

  When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

  I ran check disk for bad blocks, but several seem to be coming.

  Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

  Does anyone have a reference to what the BIOS messages mean?

  With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

  It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

  If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

  Thanks in advance for any help.

  Andy

  Hi Andy,.

  The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

  Best wishes

  DP - K

• Pavilion Slimline s5-1000z: driver Ethernet missing on s5-100z Pavilion Slimline with Win7 Ultimate

  Hi all

  I installed Windows 7 Ultimate SP1 on my daughters computer and everything works well except that when I try to connect to the router says the Ethernet driver is missing. When I Check Device Manager it shoes the Ethernet controller driver is missing. I tried everyway I know to find the driver, but so far nothing.

  I have worked with many computers over the years and a Tech with MS beta-tester for more than 15 years and I've never met such a problem before. I have the same Windows operating system installed on my HP Pavilion Slimline s5-1205z and had no problem.

  I changed cables ethernet 4 times thinking it could be the cable, but so far nothing solves the problem.

  I'm hoping someone here can help me find the driver for the s5-1000z so that we my daughter computer connected to the router. Any suggestion or help will be greatly appreciated.  She needs the computer upward and are working on Internet before school starts so that it can make its online courses.

  Thank you. :-)

  Hello:

  The card mother sheet for this model indicates that it has embedded technology from Realtek: chip Ethernet RTL8105E-VC.

  The second driver in the list on the link below should work.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• How to defragment the system disk?

  On my HP Windows 7 computer, the system drive access to the Disk Defragmenter tool showed a growing fragmentation since I bought the computer about 14 months ago. Despite the warning that only discs which can be defragmented appear, the entrance to the system drive refuses to defrag (all other defrag properly). The system drive now shows fragmentation of 26%, so there is obviously files being written and rewritten on this subject. Unless I'm missing something, the reader certainly require defragmentation. But how to do?

  BYL wrote:
  

  [snip]

  I also use Diskeeper 2010 (version Professional first) and it keeps all my system files defragmented - I don't know it would deal with the problems you encounter (you can try a fully functional version for 30 days to see what it will do for you).

  It is very reliable and I have never had any problems with it whatsoever (the company has been around for a long time and they have great technical support if necessary).

  In my opinion, it's the best defragmentation solution available because it runs in the background (so you can use the computer while it defrags) and it also prevents the fragmentation. I suggest you to get the test and try - you can learn more about it at http://www.diskeeper.com/

  There is a free offer here for the full Pro first 2011 version of Diskeeper. [Edit - the last of the free copies are spoken for.]

• HP Pavilion Slimline s5120f: hard drive

  I'm quickly running out of storage on my hard drive and would like to add a hard disk or change the original. After combing through the manual of the product, I'm as lost as ever. It sounds from the manual that this is not an expandable system. However, I believe that I could change the hard disk that is in the present to a larger hard drive. I have a recovery cd and from what I've read everything I have to do is partition the new drive once I have install and re - turn on the computer. I am less close right?

  Mike4418

  Hello;
  
  Let me welcome you on the HP forums!
  
  It's not nearly as simple to do as you think.

  You will need to remove the disk, replace the disk and then restore the configuration from the PC to the new drive - and this last step requires the use of media of HP recovery, which is NOT a CD, but instead, a DVD SET, usually 3 for the operating system and a driver CD.

  In addition, a restoration in this way begins cool and NONE of the data, settings or applications residing on your machine now would be copied to the new drive.

  Let's tackle the first elements-the removal and replacement of the drive.  It's the upgrade and Service of Guide for your PC: http://h10032.www1.hp.com/ctg/Manual/c01765809

  Information on removing and replacing the hard drive begins on page 17. As you can see, there are a LOT of work involved.

  As to restore the configuration of the PC, there is an easier way which is what you have - and which is 'cloning' the reader in a new, larger, by car.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) connect the new drive to the computer using a USB car adapter
  (3) follow the instructions in this link: http://knowledgebase.macrium.com/display/KNOW/Cloning+a+disk
  (4) shut down the PC when done
  (5) Exchange the disks and reboot the PC.
  
  You should boot from the new drive with no problems.

  Good luck