PAVILLION G6 2320: HP PAVILION G6 2320 Upgdate SSD and RAM increase

Similar Questions

• Pavilion DV6 2138ca: Pavilion DV6 2138 ca - SSD and RAM upgrade

  Hey people,

  I want to improve my lapotop hp (pavilion dv6-2138 core i5 M430 2.27 GHz), 8 GB RAM and 128 GB SSD HD.

  Will it work on this laptop?

  Thanks in advance.

  Yes, it will be.

  Pages 4-10 and - 11 of this manual:

  Repair manuals

  You need 2 of them:

  4096 MB, 1066 MHz DDR-3 DIMM 579156-001

  http://www.Amazon.com/memory-Compaq-notebook-DDR3-1066MHz-204-pin/DP/B008O537Q2/ref=sr_1_6?ie=UTF8&QID=1460914288&SR=8-6&keywords=DDR3-1066+so-DIMM+for+HP

  Any SATA 2.5 inch SSD will suggest working and I have the 250 gig. A concert 128 is a bit of containment and not much cheaper:

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E250B-am/DP/B00OAJ412U/ref=sr_1_3?s=PC&ie=UTF8&QID=1460914445&SR=1-3&keywords=Samsung+Evo+850

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion dv6 Notebook: card WiFi and RAM update

  My WiFi is not able to go as fast as the speed that I pay the cable company.  I tell myself that if I pay for it I would be able to go that fast.  How can I tell what will work in my notebook?  Same question as the RAM. Currently I have 4 GB and would like to go as far as I can.

  Please tell me what I need to know, in layman's terms, to buy what I need.

  Thank you!

  Hello

  Your computer is a HP Pavilion dv6-6112nr laptop PC:

  http://support.HP.com/us-en/document/c02996687

  1. WiFi: your machine was built around 2011 so the wifi upgrade is out of the question. You can use the USB dongle if you wish.

  2 for the RAM: your device supports 16 GB max (it has 4 GB from the beginning). Please see page 66 of the following manual for part number. You can buy HP or elsewhere.

  http://h10032.www1.HP.com/CTG/manual/c02842252.PDF

  The manual also shows you how add/replace RAM. More manual:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5173060/manuals

  Kind regards.

• Pavilion dv7t-3300: weird behavior after adding the SSD and RAM upgrade

  Has just added a new HD SSD to my note as "disk 1"(the former one is 'disk 0', he has a Win. " 8.1 works). Installed Win. 10 in the new drive and everything has worked well so far. I tried to upgrade the memory, so I bought two Crucial DDR3 1333 with 8 GB memory each, the previos configuration were two 2 GB memory (4 GB total).

  The question is: If you use a single memory (8 GB) everything looks Ok. If I add the other (16 GB total), the new SSD is not recognized, but the old man works as usual. The new drive is not yet recognized after botting from the former (not even from the Disk Manager). Already tried to drag the disks with no luck. There seems to be something with the memory, since everything works with a memory of 8 GB or with two 2 GB memory, but with two memoirs of 8Gb the new SSD seems to be dead

  Advice or similar experiences? Is there something that I am missing?

  So much worse... the SSD seems to be broken or something similar. Does not work on the other PC, then... I guess that this has nothing to do with the memory

  BTW, the 16 GB are works fine

• HP pavilion x 2 12-b000nv: Hp pavilion x 2 12-b000nv ssd and ram update

  Are there opportunities to the capacity of RAM and SSD Upgrade? I want to add more ram and an ssd of 256.

  Thank you!

  Hello! @ntinosterpsis, welcome on the HP forums!

  I understand that you need to know if you can upgrade RAM or SSD on your laptop.

  I have checked the specification of your laptop and found that you can expand up to 256 GB SSD.

  However, you cannot extend the memory since it is the amount of memory onboard.

  Please find the description fo SDS and the part below number.

  256 GB, 2280, M2, drive SSD SATA-3 support TLC 760615-018

  Please consult the guide maintaince and service for more information using this link: http://hp.care/2dtOlr1

  I hope hear from you soon!

  Have a great day!

• HP Pavilion dv6 6c51ea: upgrade of the dv6 6c51ea ssd and ram wifi card

  Hello
  As of late I thought the upgrade or replace my laptop, but I have a few questions to help me decide.
  First ram cited the speed of the processor is listed as 1066/1333 hz, however I can not check it on the site of hp and the crucial site recommend ddr3 at 1600 hz, the site hp also says is that 8 GB however apparently due to the fact that it was released on Windows 7 However the processor can support 16 GB max memory support and since upgrading to win 10 my system would be doing, is this correct?
  
  What kind of improvements I see by installing an ssd (Samsung evo 850) 500 GB?
  
  And finally the wifi card could be readily available and upgraded to the new ac wifi to use the router to HQ and speeds mon is provides and I pay!
  
  So basically will be the ssd, 2 x 8 GB 1600 mhz sodimm ram, and a wifi amd card equipped for the £300 it cost would he give me the jump in performance for his money as the cpu and gpu are rather dated now (i5 2450 m and radeon 7470 m) when a new system with an i5 4th gen with 1 GB graphics , 500 GB and 16 GB of ram, ssd would cost about £900 what would be the main benefits
  
  Thank you very much
  
  Shott

  I stand well partially corrected. The 8 gig RAM max was on the technical page of HP and the maintenance manual says maximum 16 concerts. As you note, it will run at 1333 mhz, but yes you can install 16 gigs and upgrade to Windows 10 made no difference there. You may installed 16 concerts with all 64-bit operating systems.

  Here is the Manual:

  Your repair manuals

  Page 28 - 29 a the list of supported wireless adapters EXCEPT the

  Module Intel Centrino Advanced-N 6230 WLAN 631956-001

  a mistake is well-documented. The part number is actually a single band card Ralink and other versions of HP of the 6230 Advanced-N used in some business models will not work in your laptop. We beat this horse dead on many posts here.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Example: Pavilion dv7-4142eo: upgrade a pavilion dv7 on the SSD and more memory

  I'm pretty happy with this one, but have problems with little memory and I also want to put in an SSD with 500 GB instead of old 500 GB HARD drive.   Is it possible to upgrade it to usb3 usb2?

  I tried to read about the upgrade and think it should be easy to change SSD (Samsung 850 EVO 500 GB SSD) but here of course and that's why I ask if it does not work?

  I have 4 GB of memory today and intend to put in 8 GB instead that I very often have problems with Firefox big and others. Is possible and what type of memory and size can I use?

  There is an AMD Dual Core IIP340 2.20 GHz prosessor in laptop with windows7.

  Is the serial no: CNF041C492

  Model no's: dv7-4142eo

  Hello

  1 USB 2.0 to USB 3.0 for a laptop is a change that is very expensive because it will affect to the motherboard to change USB card and even the motherboard itself.

  2 RAM: Yes, you can jump to 8 GB of RAM:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02575528

  Please use Crucial tool, it will scan your machine and tell you RAM adapted. You can buy here or use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  3 SSD: Your current HARD drive is very good. If you want to upgrade to an SSD, you can go to her but interms performance/price, that's a little overkilled.

  Kind regards.

• Pavilion dv7-2050sm: SSD and RAM upgrade questions

  Hello

  I have two question about upgrading my laptop. I use it for web surfing, movies, some excellent/word work etc... for the most part on a regular basis.

  (1) I have seen that my RAM can be upgraded to 8 GB. Currently, I am working at 1333 MHz 4RAM. If I buy 2 x 4 GB 1600 MHz will it work on this laptop, I went into the BIOS and have not seen that I can change the speed of ram anywhere nor has seen how much can this support for portable computers, so should I buy 1x4Go 1333 MHz instead if it only supports 1600 MHz.

  (2) can I put my disk HARD 700 GB Seagate 5400 RPM SATA II 3.0 Gbps with Samsung 850EVO 250 GB SSD? I know that SATA III drives are retro-compatible meaning can work on SATA II but is it useful, how much speed will I use if my laptop does not support SATA III.

  Laptop computer product number: B4E42EA

  Chipset: AMD A70M FCH

  CPU: Improved A6 4460 M to 4600 M A10

  Thank you!

  It will not run at 1600 mhz just so buy another 4 GB of DDR3-1333 memory. The SSD is the best upgrade you can do. Certainly worth. SSD SATA-III will work fine on a SATA-II bus. There is very little difference in actual operation.

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• HP Pavillion DV6700: Is my HP Pavilion DV6700 Compatible with SSD?

  I would like to know if my HP laptop is compatible with SSDS. An Internet search turns postings that say that it is possible and other thay say my PC is not compatible with SSDS.

  Here is some info on my installation.

  My PC is a HP Pavilion DV6700 CTO Entertainment Notebook
  I am running Windows 7
  The PC came with Windows Vista

  The BIOS is Hewlett - Packard l58 2008-06-16
  The processor is Intel Core Duo CPU T7500 to 2.20 GHz, 2201 Mhz, 2 carrots, 2 logical processors

  The new SSD is a Samsung SSD of 850 EVO.

  (1) my PC is compatible with SSDS?

  (2) are there updates the BIOS or the settings of the software that I need to know?

  Thanks for any advice.

  Yes, it is a fully native SATA (ahci) system and an SSD works perfectly. With Windows 7 operating system will know it is a SSD and activate the TRIM and other optimizations to the SSD. It will be a version SATA slower that curent models but you still benefit greatly from an SSD. You must update the BIOS on this model, but not because of the SSD. There isn't quite enough important updates BIOS for this model which correct some problems of initial material as the fan operation and resume the suspension.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavillion dv6 1325er: HP Pavilion dv6 1325er RAM upgrade

  Hello world.

  I had a problem. I have Pavilion dv6 1325er with factory supplied RAM: 1 + 2 GB. I bought two Corsair 4 GB, but I often have BSOD. Privateers set fail in memtest, but each one goes. And Yes, DDR3 1066 Mhz, 7-7-7-20.

  Could you please tell me what exactly RAM should be compatible with my laptop? Something like that?

  So I tried a lot of memories. Now I can really say that Ballistx Crucial is guilty (and perhaps the only). I bought two 4 GB memory in each memory. And the number of chips is 16 on each memory. Memories with 8 tokens does not even of Crucial, even exactly the same features as the memory, I had the factory in my laptop. Memtest86 doesn't fail, so I think all is well. We will see later.
  Thank you very much for the help.

• I accidentally uninstalled an original program on my hp pavilion x 360 13-a010nr and can't find it

  I accidentally uninstalled an original program on my hP pavilion x 360 13-a01092nr and can not find what it was called, I would very much appreciate a list of all the original programs that have been pre-installed on my computer model thank you.

  @A_Common_Guy

  The specification includes a general list, even if this isn't 'by the name of the facility"in all cases.

  HP Pavilion 13-a010nr x 360 Convertible PC product specifications

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP pavillion x 360 13-a020nr: is is possible to install m.2 ssd and hdd simultaneously in hp pavillion 360 13-a020nr x?

  Is is possible to install the m.2 ssd and hdd simultaneously in hp pavillion 360 13-a020nr x or I'll have to remove the hard disk to install the ssd?

  @VBenedichuk

  Most of the time in the manual it looks like there are limits.

  Example if SATA and M.2 settled m2 must be the bootable disc.

  Example, if m2 is installed, then the other drive should be an SSD.

  For yours, I see no limitation.

  REO

• Pavilion g6-1d21dx: no luck update Pavilion g6-1d21dx to SSD

  I tried to replace the hard drive in my g6-1d21dx with a SSD Pavilion before enjoying the free update of Windows 10. I installed the drive (a unit of SanDisk Extreme 480 GB that I had sat unopened for a while) and then used my recovery discs for Windows 7 on SSD. The process seemed to go very well - he went through all the discs five recovery, restarted from the SSD and began the installation process. Soon, I got an error message "restoration incomplete" well. So much for that. (The HP Recovery Manager also gave me this incredibly helpful explanation: "there could be unexpected reboot phase Specialize in BBV1.) ("The process will cause panic CTO because the image might not be normal") on the reset, I also had an error message about ntoskrnl.exe is damaged or missing.

  I put the original back drive computer to and updated from Windows 7 to Windows 10 on this drive, just to get the license Windows 10 (it was the last day to get the free upgrade). I also used Windows 10 media creation tool to create a Windows 10 installation DVD. Then, I put the SDS back to and I tried to install Windows 10 using the DVD. I tried several times, but the installation has always fails. I got error messages like "Windows could not set the offline locale information. "Error code: 0x80FE0000" and "we could not format the selected partition. [Error: 0 x 8070057]. "I've also had this a few times:"Windows cannot be installed to this disk. Windows cannot read the selected drive. Windows cannot be installed to this disk. Windows has no determine if this disc and his parents have the necessary driver support. »

  This computer isn't all what age - it is possible that the BIOS does not support the SSD? I updated the BIOS of the SSD, but that has not solved the problem. I also made sure the BIOS of the computer is up to date.

  Thanks in advance for any relevant information.

  Here are the conclusions that I have reached after spending a lot of time on this project to upgrade:

  At the beginning of this thread, what you advised me strongly to clone my old hard drive instead of trying a new install of Windows 10 on my SSD. I recommend the contrary unless your system works perfectly with your old hard drive, because this way, you can leave the system, the software and the data files on your old hard drive intact in case you go account you have to go back and check on something or you decide to abandon the upgrade. I found that there is no mystery to a cleaning only install on an SSD, as long your SSD is compatible with your computer. I had updated my old HDD from Windows 7 to Windows 10, and after this upgrade, I was getting other error messages every time, I started the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). Since there are so many problems on my old HDD, I have probably restores it to Windows 7 so I can always, in case I ever need to refer to my old configuration. Web sites said that once that Windows 10 has been enabled on your computer, future Windows 10 installs on the computer is automatically turned on, even if you have restored the machine to Windows 7 or Windows 8.

  If you try a new installation, make sure that you do so with an attached network cable. It makes a huge difference for me. A clean install without a connected network cable has led to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. When I did a clean install with an attached network cable, all of my devices have been installed automatically. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. Wireless network connected during installation, even my Wi - Fi was not usable during or after installation.

  One final note: my g6 Pavilion is 64-bit capable, but I installed 32-bit Windows 10 on it, because I use an old software running under Windows 64-bit 10. So far, 32-bit Windows 10 seems to work very well.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!