Satellite C670 - monitor: gamma too high setting at startup

Similar Questions

• Satellite M640 - temperatures are too high?

  Hello, I played left4dead2 on my laptop. Processor and graphics card:
  Intel Core i5 - 460 M Processor 2.53 GHz (2.80 GHz with Turbo Boost technology), 3 MB of Cache
  Mobile Intel HM55 Express Chipset
  Mobile Intel HD Graphics with 64 MB 1696 MB dynamically allocated shared graphics memory
  Memory configured with 4 GB of DDR3 memory (max 8GB)

  I know is not a portable game, but the thing is my Tj's 105 C and when his inactivity is arround 50 c but when I run this game it gets 88 C.

  Should I be worried and did anyone know about a parameter called Tcase? I don't know exactly what it is, but I read that it was related to the optimum temperature of the processor.

  Hey Buddy,

  Problems with laptop computer and during the games? In the case otherwise and everything works correctly, you can forget about temperatures. If your laptop overheats it would be closed to protect the equipment. Otherwise everything is ok!

  In addition he s not clear to me how to check temperatures. As far as I know Toshiba doesn t provides all the tools to check the exact temperature in degrees centigrade. If you use an external 3rd third-party tool, it might show you the wrong information.

  For the moment, I think the tool is just the problem that shows you the wrong information because you n t write about all the problems. You should have fun with your laptop ;)

• Too high temperature on Satellite Pro L20?

  Hey,.

  last night, when the temperature of the 'Temp 1 meaning' of game reaches 101 ° C / 210 ° F.

  Is - this too high?

  My Toshiba Satellite Pro L20 is now almost 5 years old. The fan works and the Bios for the cooling setting is set to 'Performance '. If the current clock speed is roughly 800 MHz (1.7 GHZ), feel Temp 0 is between 35 and 40 ° C / 95-105 ° F and the Temp sense 1 = 50-60 ° C / 120-140 ° F.

  Michael

  Seems a bit high for such a machine... have you ever cleaned the cooling system of your laptop?

  Could be the fan and cooling impeller is clobbed with the dust that causes these high temperatures. I suggest you to go for an electronic market, take a can with compressed air and clean with compressed air as the cooling system of dust and all that lives inside your machine. :)

  Please check after cleaning if the temp rise again.

  Welcome them

• Setting screen brightness is too high

  I have the screen brightness setting that is too high and I need your help.thanks for your help in advance online.

  Hi FarhanAbdi,

  Try the steps from the link to the following article and see if it helps:

  Adjust the brightness and contrast of your monitor

  I hope this helps.

• Satellite L850 - 150 PSKDLE - a little too high internal temperature

  Hello friends of support.

  Satellite L850-150 PSKDLE - 07L 00
  Slow times get a little hot atm... (60 - 70).

  If I want to change the cooling block, but my problem is how to disassemble the laptop?
  Google does not want of hits on this topic...

  Can someone help me with this?

  Thank you very much.

  In my view the 60-70 ° C are not too high.
  For me high temperature is about 80-90 ° C, but at 60 ° C is nothing unusuall.

  Furthermore, always depends on how you use the laptop and what software is running.

  Play games, you will always notice a higher temperature.
  In General, you should pay attention to the internal cooling fans.
  Dust and debris could be the main reason for a higher temperature and clean the holes and vents should be good enough to keep the temperature low.

  Use compress air jet to get rid of the dust. Usually, this helps.

• Satellite A350D - too high temperature of the processor

  Hello guys.

  My laptop CPU temperature is too high. I have Windows 7 Ultimate 64 - bit edition. And the temperature at idle is ~ 70, she raises up to 98 C when loading the system. It happens only with 64-bit OS. 32-bit Windows idle temperature is ~ 40-50 ° C.
  I have the model A350D PSAKCE.

  Any ideas?

  Hello

  There is a new version of 64-bit BIOS.
  In your case, I recommend to check the version of the BIOS.
  If you still use an older version of BIOS (perhaps 32 bits), then you need to update it to the latest version of BIOS 64-bit.

  Good luck

• Problems of replacement screen satellite C670

  Hello

  I was wondering if someone could help me?
  The screen on my C670 works but has visible damage and a lot of dead pixels,
  I bought two replacement screens, but have been unable to operate them, any more than the backlight to come.

  Two replacements were returned to where they were purchased and are tested and found to work very well, I am now at a loss at what to do next...

  I don't really understand what could be the problem the two substitutes did not work but my original works well... surely if there was a problem with the connector of my screen does not work either?

  My screen is a LP173WD1 (TL) (N1) and the replacements have been N173FGE - L23 and LP173WD1 (TL) (E1) which I was assured were both compatible with my device.

  Thanks in advance

  Ealdra

  Post edited by: ealdra

  Hello

  As far as I know, there are different sets of Satellite C670.
  I found some details about the PSC3SE, PSC3NE, PSC3LE, PSC3QE of the submodels.

  It seems that the LCD module 17.3 "W HD + (1600 x 900px) uses a backlight LED as the light source.
  Then you should be sure that you use the right one.

  I don t think that the view on the motherboard controller is faulty because in this case the original display would not work too.

  The LCD screen and motherboard are connected by cable, inverter, the inverter Board and
  LVDS cable. You must ensure that the LVDS cable is firmly connected to the motherboard.
  If the connection is loose, firmly reconnect and restart the computer C670.

• Satellite C670/C670D - its weird when I plug my headphones

  Hi all

  Mainly, I sorry for my bad English, but I have some French and this post was traduce with google translate.

  Here, for 2-3 days when I plug my headphones on my PC and I am trying to listen to music it makes me lots of bass, the instrumental... And down a bit, you can hear the voice of the singer. It is very annoying, because it is not terrible.

  _Information Laptop_: Toshiba Satellite C670/C670D.

  _Solutions I tried_: (in order of trial)
  -Check if the problem is not the cable or the headphone connector.
  Comment: The headset works perfectly on my phone with the same music, or even the laptop of my little sister who is exactly the same as mine.

  -Go to control panel > sound > property on the audio output > level > balance > back to 0% on the left or the right.
  Comment: The voice is back, I can hear the music perfectly, but now I hear a team of very strong of the headphones, the difference between the two when I wear this sense the helmet of two "ears." More when I unplug my headphones, I can hear more on one side of the speakers built-in to laptop.

  -Check the "Cancellation of the voice" option is not checked in the property of her.
  Comment: The option is not enabled when the headset is connected and that one side is 0% as it is an I had not set aside 0%.

  -Perform a system restore to a date prior to the problem.
  Comment: The problem has occurred since 31/01/2013. I'm back on the date of 29/01/2013... In vain, always present!

  -Check the update driver 'Realtek '.
  Comment: I went on the site "Ma - config.com" where I found an updated driver after the hardware detection. Once the update made the same problem again and again.

  I get annoyed by this problem that do not allow to appreciate the quality of my helmet on my PC. In addition, the problem is with either the Windows, on Youtube, on VLC disk...

  If anyone can solve my problem.

  Thank you in advance!

  Sincerely,
  Drama

  > The problem occurred since 31/01/2013
  And what have you done so far? Have you installed or changed something?
  I mean that the problem cannot occur without any reason.
  I never had such a problem and don't know what can be the right solution, but try to reinstall the sound driver and copy the driver from the Toshiba download page.

  Check first and then post comments.

• How to load XP on a Satellite C670?

  Hello
  First of all, I should say hello to all the Forum.
  I have problems loading xp on my Satellite C670. I tried to find the drivers for the sata, no luck, so I can't I load xp, also went into the bios, and set its compatibility F6. No luck at all yet.
  Is anyone know the correct drivers that I need and also how to do it.
  Thank you
  thyristor44

  Hello

  What C670 do you have exactly?
  Toshiba offers 10 different models (different part number).

• Satellite L40 CPU is too hot?

  I just bought a Satellite L40 with a intel T2370 processor and I have a feeling that its temperature is high enough.
  Everest ultimate sensors show a temperature around 70 c during operation.

  This temperature is normal?
  Other users have a similar temperature?

  Thank you.

  Hello

  The temperature of your laptops is certainly not too high!

  You need to know some important facts;
  First a few 3rd party tools don t always provide values for temperature of 100%!
  Second, the internal temperature is constantly changing.

  Running some games, videos, or other high performance programs would lead to higher heat dissipation and a higher temperature
  This is a common behavior of laptop so don t be worried that something is wrong with your laptop ;)

  By the way; the laptop supports an overheating protection. It will stop automatically if the temperature is too high.
  If the computer laptop doesn t turns off automatically, your CPU temp is ok.

  Good bye

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• Privilege of 5.0 ACS too high

  Hello

  I try to determine the cause of this error.

  by connecting to my time, I am able to authenticate to the user mode.  However, when I try to connect to exec priv mode, authentication fails, and in the journal of the ACS, there is an error that is generated advising "privilege level is too high."

  I'm not quite clear what generates this error.  He advises checking the authorization profile, I did... I tried to set the privilege level of 0 to 15 does not...

  any suggestions on where to locate where this comes from?

  Bruce

  ACS 5.0 is very different in the concept of ACS 4.x

  and use a system policy to determine the processing as opposed to confiuring as part of the basic user/group definitions.

  There are some materials, including a video, which is available from the home page of the application.

  WRT your question says, I think the change you need to do is as follows to create a new Shell with 'Maximum privilege level' profile 15

  1) go to

  Access policies >... > Access Services> default device Admin> authorization

  (2) select the check box of the line that starts by default, and then tap on change

  (3) press to Select, and then click Create to create a new profile of shell

  4) enter the value 'Maximum privilege level' depending on which name you desire, then tab "Common tasks" where 15

  5) press 'Submit' to create this profile and then OK twice to select the new profile of the fact of politics

  (6) Finally, 'Strategy for leave to peripheral Administration' press 'Save Changes' to change the strategy to get the result that you just created

• HP Photosmart more B210 - printing is too high on the paper.

  The text is too high on the paper.  I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels.

  I tried to change the paper size under tray settings/Main properties/device of the "letter" to "A4" - click on apply and OK - but when I check that the setting is always "letter".  Don't know if this is causing the problem, but if the book 'Letter' measures are lower than those of the A4 paper, he could be--and I wondered why I couldn't set this parameter.

  The printer is related to the Windows XP laptop and desktop Windows Vista computers.

  I hope someone can help.

  If the changes are not stick when made directly in the driver, the driver is probably corrupted. Try to uninstall and reinstall the printer driver and software package. I'll link the latest version below. Let me know what happens.

  HP Photosmart full feature software and drivers

• Please think when the memory usage is too high.

  Hi all

  My version of Oracle is 11.2.0.4 64-bit

  And Linux version: SUSE Linux Enterprise Server 11 (x86_64) SP3.

  Use of memory on the server is too high.

  AP - GV - SP713:orasop 55 > free t m

  total used free shared buffers cached

  MEM: 258341 257482 859 43775 8 219455

  -/ + buffers/cache: 38018 220322

  Swap: 65535 3919 61616

  Total: 323877 261401 62475

  AP - GV - SP713:orasop 56 >

  Top of PAGE process 10 consuming the most memory is below -.

  AP - GV - SP713:orasop 56 > ps to the | Sort - nk + 4 | tail

  orasop 15385 3.7 0.0 30937152 9916440?    SS Nov23 01:40 ora_dbw2_SOP

  orasop 15408 3.7 0.0 30933376 9809912?    SS Nov23 01:39 ora_dbw5_SOP

  orasop 35335 3.8 0.6 30932204 10316356?   SS 04:32 03:00 oracleSOP (LOCAL = NO)

  orasop 7121 3.8 0.1 30932164 10296904?   SS Nov24 01:51 oracleSOP (LOCAL = NO)

  orasop 10997 3.9 0.3 30928188 10457696?   SS Nov24 03:34 oracleSOP (LOCAL = NO)

  orasop 15371 3.9 0.0 30937024 10399132?   SS Nov23 01:44 ora_dbw1_SOP

  orasop 7216 4.7 0.8 30929072 12475216?   SS 05:08 03:55 oracleSOP (LOCAL = NO)

  orasop 14793 5.0 0.6 30940416 13390616?   SS Nov24 06:29 oracleSOP (LOCAL = NO)

  orasop 18524 5.0 0.7 30928112 13329416?   SS Nov24 07:08 oracleSOP (LOCAL = NO)

  orasop 31019 11.2 5.9 30926108 15609268?   RS 06:14 42: 21 oracleSOP (LOCAL = NO)

  AP - GV - SP713:orasop 57 >

  In the oracle memory setting is:

  SQL > select decode(pool,null,name,pool), round (sum (bytes) / 1024/1024,4) MB in Group v$ sgastat by decode (pool, null, name, pool) order by 2 desc;

  DECODE (POOL, NULL, NAME, POOL MB

  -------------------------- ----------

  BUFFER_CACHE 15360

  Shared pool 13952

  pool of Java 448

  log_buffer 56.9688

  fixed_sga 2.1634

  Please suggest if the memory must be increased and also I see a dynamic memory management is not turn on on the server.

  SQL > show parameter sga_target

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  SGA_TARGET large integer 0

  SQL > show the memory_target parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  memory_target large integer 0

  SQL >

  SQL > show parameter sga_max_size

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  very large integer SGA_MAX_SIZE 29952 M

  SQL >

  Please suggest.

  Thank you before acting.

  Concerning

  Jean Louis

  Yvon says:

  Please check the error of the alerts log when the database is set automatically.

  WARNING: VKTM detected a drift of the time.

  Time derivatives may cause unexpected behavior, such as wait times. Check the file path for more details.

  Mon 23 Nov 20:41:17 2015

  Closure of proceedings (immediate)

  Closure of proceedings: in addition to logons disabled

  Stop background MMNL process

  MMON background process stop

  The high waters = 53 license

  ALTER DATABASE CLOSE NORMAL

  ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  Mon 23 Nov 20:41:20 2015

  Stop background VKTM process

  Mon 23 Nov 20:41:22 2015

  Instance shutdown complete

  Concerning

  Jean Louis

  I say that DB was reduced by human intervention based on below

  Accident never issue SHUTDOWN IMMEDIATE

  After the accident alert log shows DB followed by BOOT messages running.

  > Closing instance (immediate)

  Problem exists between keyboard and Chair only.

• too high percentage of CMYK values

  IM using photoshop cc and comedic values equal about 200%.  How to lower them for fix the colors accurate?

  You can get a 200% limited profile of folk related to the production of your comic strip? It is a very low value of ink, even newsprint is usually 220% or higher.

  The depreciated legacy custom CMYK control can create a 200% of ink separation, but they are not based on the specifications of modern colours and you can have different colors than expected. If yo can then need to assign the good press or Proofing profile and then adjust as required (making sure not to adjust ink beyond your target).

  Another trick is to convert it into a proper CMYK profile which offers ink too high, but the right color. Then convert a copy of ink custom CMYK 200%, then copy/paste/preserve numbers on the highest total of ink version and set the blending mode of the layer to luminosity. This should reduce the total ink and maintain the appearance of color as much as possible. You may need to limit this through a mask or mix-if only the tones cursors more dark and three-quarters of tone transitions.

  With such a low value of ink, be sure to use 100% K of the blacks to get the best density you can (for as much as this do not connect details in shadows).