Pavillion g6: cell death

Similar Questions

• Lenovo X 60-Cause: BIOS updated has failed, result: cell death

  I work in a company as IT Manager and during an update of a laptop Lenovo X 60 Type: 1707-CTO using "system update" application, in the middle of the process stopped BIOS flashing / crashed before the end and now the laptop don't boot/boot (black screen on startup and nothing more).

  I think it of a stupid idea a process updated BIOS with Windows application and is the first time that I use this 'system' update and for sure the last!

  Now, back to my problem... the laptop is out of warranty, so I need to find a solution to put the laptop working again.

  My simple question is... What is the best way/solution? I can reflash the BIOS again? How? Can I replace the BIOS physically? How?

  In advance, thank you for your help.

  Best regards

  Well, the problem is solved... I've created a Frankenstein laptop

  Accidentally, a user has dropped a laptop Thinkpad X 61 and broke the screen, so I remove the mainboard that laptop and assemble in the chassis of the X 60 BIOS problem. The fingerprint do not work, but the laptop is functional.

  I think that Lenovo equipment are good machines, must, they must improve this point of flashing the BIOS. It's ridiculous to put a good laptop off service, only a bad update without fault of the user.

  Thank you guys for your answers!

• Satellite Pro A200 (PSAE4E) - location of BIOS chip

  The location of the chip of the BIOS on this Toshiba or anyone have a picture of something similar, so I know what I'm looking for? I took the motherboard and despite a sticker that says U52 ILHAM V1.20 BIOS, AAB4, I can't find t he (assuming that U52 refers to the number of chips).

  Cell death after a BIOS update failure so investigate on get another reprogrammed if I can find where the chip is.

  I didn't really update the BIOS - I run the util Toshiba BIOS to see what version I had installed (I think that all other util of BIOS I used allows to see this info before I do anything)-Fr. lists v5.6 for XP but v2.6 for Vista (have not heard before different BIOS for different OS. The Toshiba util went straight into programming - no info, no warning.

  Not worth the cost of replacing the mobo and respectful of the environment, I would rather at least try the replacement of the chip (perhaps if someone from Toshiba is reading this and they would prefer that the environment, better try that by far the mandrel, then they might feel inclined to let me know where it is!)

  Any info gratefully received.

  See you soon

  Rob

  Hi Rob,

  First of the BIOS chip is always located on the motherboard, but it s not so easy it reflash with another image. It is possible people allowed because it's not easy. In the worst case, you could destroy your motherboard together!

  I m no owner A200 and I never turn off laptops because it's pretty tricky. In this case contact the ASP for help. I recommend to you! The guy can really help you.

  Here you can find one:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

• All new Satellite W30T-A-101 died after running Setup

  We have a major problem with a new Toshiba Satellite W30T-A-101. After running in the process configuration of Windows 8; and using the laptop for less than an hour. Suddenly, the screen is empty. The laptop is connected to the power supply; and we have tried power cycling. It fails to start in tablet mode or laptop. It's a cell DEATH. It is very unusual for Toshiba, but I am worried because it was actually made in October 2013... ! Could there be a problem of batch processing?

  Before I return it to the retailer for a refund or replacement of tomorrow; I would like to know if these 2-in-1 laptops are not reliable and I should move away.

  Having owned most of Toshiba laptops, it's unexpected, but very disappointing.

  > Having owned many laptops Toshiba, it's unexpected, but extremely disappointing
  I can understand you. It's really unexpected, but... it happens.

  Date of production is not so important. Day of purchase is important. Bring it back to your dealer and ask for replacement. Do it as soon as POSSIBLE.

• probookg2 450: no power light indicated on my hp probookg2 450

  No specified light output. Cell death without signs of operation .capslock numlock blinks 7 timed

  spare part is not on the site.what I do

• Trio, 700wx Sprint - shortcuts to your voicemail

  I had Sprint port my landline home phone to my Treo 700wx. My old Sprint # is gone, cell death. Phone has been reset hard by Sprint for the new #. Then I used Sprite to restore all my software and settings (was saved to my SD card).

  Now comes the problem: there are 3 shortcuts in WinMobile 5 to dial the voicemail:

  (1) press #1 on the physical keyboard.

  (2) press #1 on the virtual keyboard on the touch screen.

  (3) click the "voice mail" link on my screen 'Today' when a new voicemail is left for me.

  I programmed the button #1 physical to dial my voicemail, works very well. HOWEVER, the other two methods always dial my old cell # who is now dead. I can't find a way to tell mobile Win to compose the new cell #.

  Sprint technical support cannot find a Solution. We reprogrammed the phone several times, even replaced the phone is mounted.

  When the telephone is set and programmed from scratch, all right. But when I restore all my other software using Sprite Backup, somehow Win Mobile programs the other two methods of voice mail to the old cell #.

  Does anyone know how to access the fields in Win mobile 5 code to program my new cell #?

  BostonDad wrote:

  I had Sprint port my landline home phone to my Treo 700wx. My old Sprint # is gone, cell death. Phone has been reset hard by Sprint for the new #. Then I used Sprite to restore all my software and settings (was saved to my SD card).

  Now comes the problem: there are 3 shortcuts in WinMobile 5 to dial the voicemail:

  (1) press #1 on the physical keyboard.

  (2) press #1 on the virtual keyboard on the touch screen.

  (3) click the "voice mail" link on my screen 'Today' when a new voicemail is left for me.

  I programmed the button #1 physical to dial my voicemail, works very well. HOWEVER, the other two methods always dial my old cell # who is now dead. I can't find a way to tell mobile Win to compose the new cell #.

  According my 800w, I suspect that your old number is in the registry, this Sprite Backup restores. I installed a free software named PHM Registry Edit. I used the tools > Find to search for the last 4 digits of my cell phone number. I found it in these two locations including its highly relevant to your question:

  \HKCU\Palm\State\Messages\VMail\VMailNumber

  \HKCU\Software\Microsoft\VMail\PhoneNumber1

  Now... edit the registry of Windows Mobile is just as dangerous as edit your Windows registry desktop base, but you have a backup already, so I suggest to try to change these two values to your new number and see if that fixes it.

  (Sprint probably does not have this in their book because encourage users to try a Registry Editor could make supporting exponentially harder phones...)

  It work?

  Message is about: Treo 800w (Sprint)

• Pavillion dv 9074cl: drivers missing for coprocessor and Base system device

  I have a Pavillion dv 9024 cell cl. OEM OS is Windows XP. I improved by doing a clean install of Windows 7 (64-bit). Miss me now drivers for 1. System of base and 2 device. Coprocessor. Are they necessary? If so, how can I find and install the drivers?

  Hello:

  Here are the links to the drivers you need for these two devices...

  Coprocessor:

  This package provides the driver for the NVIDIA nForce Chipset in the notebook models and operating systems.

  File name: sp36079.exe

  BSD:

  This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp34639.exe

• Error 601 on HP Pavillion G7 1355DX start - but I can't locate CMOS to replace

  Hello

  We have a 1355Dx Pavillion G7 + 2 years and he began to give the 601 error at startup.  I did search these forums and all can determine, is a problem of internal battery, which means CMOS.  But when I turn the laptop and remove the battery, then the access cover where the HD and memory, I don't see anything that even looks like a CMOS battery.    Battery main high-power is model 593553-001.

  This model is a CMOS battery?

  Any help is apprecaited!

  Thank you!

  BCA

  Hello

  601 error code is a bit misleading - it's refers to the main battery of your laptop computers and not the RTC (CMOS) cell on the system board.  This error code is usually generated when the main battery capacity fell below 25% of its original value.

  To confirm this, you can run the test of checking battery in HP Support Assistant or download and run the battery pack utility test available on the next page.

  http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm

  Kind regards

  DP - K

• Blue Screen of Death After Windows Update

  I was out of the House one night and while outside, my cell phone went through a routine Windows Update and restarted (what he did specifically I'm not aware of). Unfortunately, when I came back, I met a blue screen of death. I tried a system repair and restoration of the system, and none of them worked. I'm typing this from my wife's computer as we speak. I am very anxious, and I would like to use my laptop again. If anyone can help, please reply as soon as possible.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• Function numbers for dynamically on average over the last 30 cells

  I am a trader and I have several months of data. I currently have a percentage of the sum of all the victories and defeats by currency pair. I want to create a function that retrieves the last 30 cells of data and creates a percentage I can compare it to the percentage of total victory.

  The cells are empty, unless I have add data in either to the upper or lower row. 1 win and - 1 are losses. 0 means not configured.

  Here's a full month with 20 data cells (cells max per month are 22) of trading days:

  

  This is the current month:

  

  I have 16 months of data with percentages of victory for all my data. As you see, I also have winning monthly winning percentages easily in the examples above (with a small division). I really, really want to compile data from the last 30 cells with data to create a winning percentage. It would be necessary to sometimes include 3 different lines of different months of data to create 30 cells with a number inside.

  A friend used the COUNTIF command but I do not have it works for me.

  If there is a different website to request this detail of the question please share that too.

  Thanks in advance,

  B

  Hi Braddon,

  It would be a pretty easy task if the data to be summed up in two columns from a single table and had no gaps, but that doesn't seem to be the case.

  Screenshots of two isolated sets of cells containing two rows (railway of) the data to be summarized, but give no indication where these data will be found in the document does not provide sufficient information to start to find a solution.

  Where are the data stored? You say "data for each month." "Every month" is recorded on another table?... on a pair of rows of the same table different?

  In the image (very vague) I, the factors of complications will gather data from a subset of continually changing several tables on multiple sheets and which specific cell contains the 30 most recent reference and is the one to start the harvest.

  While a few details and clarifications.

  Kind regards

  Barry

• The AppleScript get cell numbers active

  I want to create a script that checks the active cell or column better / assets to the keyboard layout for the automatic switch from English to Korea and visa versa...

  I can't find it anywhere... where to get the active column? Help, please!

  AppleScript to affect the current selection (if the selection is a single cell, an entire column or some other range) is as follows:

  say application "Numbers".

  say front worksheet active document

  say ( class is worn) fromfirst table whose selection range

  say a selection range

  -do things here, for example:

  -the value of background color "red".

  -value of the first cell value v

  end say

  end say

  end say

  end say

  However, from keyboard, I don't know why you should check the specific range in number.  You may want to watch v (value in, say, the first cell) to check if it is in Korean or in another language?

  SG

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• Numbers: The mobile cell formula

  

  This may work for you:

  

  E2 = if (value (D2) > 0, C2−D2, ' ')

  It's abbreviation dethrone select cell E2 and then type (or copy and paste it here) the formula:

  = IF (value (D2) > 0, C2−D2, ' ')

  Select cell E2, copy

  Select cells E2 at the end of column E, block

  F2 = SIERREUR (IF (AND (E2 = "", E1 > 0), C2 + CEILING (SUM($E$1:E1) ÷ (ROWS (D) −COUNTA (D)), 1), ' '), ' ')

  Select cell F2, copy

  Select cell F2 at the end of column F, dough

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).