Windows Vista error 504-Gateway time-out

Similar Questions

• Windows vista error

  is anyboy know how sovle windows vista error: your user profile was not loaded correctly! You have been logged on with a temporary profile"I got this trick on my laptop and it says prepare your office and then pops up this message and all my documents have been delected so please help thank you very much!

  I can not connect from the windows login page that my profile does not load, please can you suggest a fix? Please can you teel me step by step what I need to do about it, I am connected with the other profile of the user who is not an administrator for the time profile, my password does not work for updates, if I try to update something in this respect either.  Help, please!

  Hello

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.
  
  http://support.Microsoft.com/kb/947242

  also, you can try the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

  Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
  I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

  My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
  This issue has been hard for awhile and its a little boring.
  Thanks in advance.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  NB: Your Norton application can disable Windows Defender by default.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 80073AA2 Windows Vista error code update KB973917 and KB970430 Frustration!

  I have a problem installing the updates on my 32-bit Windows Vista laptop. I have both updates KB973917 and KB970430 both indicate the error code 80073AA2 and two KB976325 and KB971737 updates showing the error code 800F0826.  The laptop has the message that it is install update 3 of 3, is 100% then says that the updates have not been configured correctly - he keeps trying to install updates.

  I find it quite frustrating because this is the second time (the last was SP2) this year that updates have not properly configured and as a geek no I'm not able to settle this issue myself!  I got a very helpful guys at Microsoft call me before; However, if I can get some advice on how to fix myself I would be very grateful!

  Thank you, Maggie Ross.

  @MeggyRoss: Try this triple McAfee fix, especially if you are using McAfee Security Center-Online http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update Windows Vista error code A 8024, 000

  I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

  After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

  I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

  Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

  I just replaced my hard drive due to the old one failed and had to re - install Windows Vista Home Premium on my laptop.

  After the operating system has been installed again, I went to check out the updates and I got error code A 8024, 000.

  I have an Acer Aspire 7720-6569 2 GB of Ram. Intel Core 2 Duo T5450 processor.

  Was from my old hard drive WD Scorpio 160 GB and I replaced it with WD Blue 320.

  Already answered here... Please take a look

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Vista-update-error-code-8024a000-after/c5f85a66-7418-41de-aa31-208071a9ea85

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-perform-Windows-Update-error-code/ccc838fe-21ec-460B-8b0b-6863697a5550

• Impossible to update KB249163 on windows vista-error code 80070026

  Original title: Windows Update problem

  I can't install the update for Vista KB249163; get the error code 80070026.

  Hello

  1 did you do changes on the computer before the show?
  2 are you able to install other updates successfully?
  3 mention is the correct KB number.
  Follow these methods.
   
  Method 1: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.
   
   
  Method 2: temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 3: you can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx
   
   
  Method 4: follow the steps in the article.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
  Response with the correct number of Ko, Ko you mentioned talking about article:
  The KB 249163 talks about 'Orders seen in a Network Trace LDAP':
  http://support.Microsoft.com/kb/249163

• How can I fix windows vista error, pshed.dll 0xc0000221 lack?

  I get this error for more than 2 weeks now.  I did not change anything or install/download anything. It says it is missing or damaged PSHED.dll error0xc0000221. I tried to use the vista disc to repair but it never works, it is said that he cannot fix.  I'm unable to start the computer because of all this help is appreciated!

  Hi Chiomaa,

  The file PSHED. DLL is part of the component that allows hardware errors to be generated.

  Since you are unable to boot to Windows, try to run a checkdisk boot from the disk Installation of Windows Vista.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  a. Insert the installation disc and restart your computer.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  For more information, see the article:

  BIOS: Frequently asked questions

  b. choose your language settings, and then click Next.

  c. in the System Recovery Options menu, click command prompt

  d. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  e. press y when you are prompted to check the drive the next time the system restarts.

  f. restart the computer.

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

  If the problem persists, then you should make a backup of important data and try to reinstall Windows Vista.

  For more information, see the following article:

  Installation and reinstallation of Windows Vista

• I downloaded several updates available for Windows Vista and since that time, I was not able to access my emails. I use netscape and the page opens and freezes.

  I downloaded several updates for vista (no critical updates) and since that time, I was not able to access my emails. I use netscape and the page opens and freezes. What should I try?

  original title: EMAIL GEL

  Hello

  What updates do you have installed?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Is there an easy fix for intermittent boot Windows Vista errors?

  Recently I have experienced dialogue to repair system at the start of my Windows Vista system (gateway).  Sometimes it to repair and restart.  Sometimes, he goes through several reboots and wants to 'restore' my system (which I avoided doing out of fear).  I wrote a few diagnostic messages and would be happy to share them with anyone.  Thank you

  Hello DefragXX,

  Please let us know the result in clean boot.

  In the meantime try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Windows vista error - catastrophic failure - error occurred during automatic backup of files

  • Windows vista service pack 2
  • error 0x8000FFFF catastrophic failure code
  • update browser GOOGLE chrome
  • Run the disk check, have also partioned disks (supplied with the new laptop), but still keep on this error

  SOLUTION:

  The solution to the problem, I met is the following:

  Step 1: RESTART your computer, press F8

  Step 2: select the first OPTION (depending on the manufacturer of your computer, it may be first or second, and so on...)

  The option is: fix my (the) computer

  Step 4: It will load the same in SafeMode (just an example), select your OWN USER NAME (though more are available), log in as an ADMINISTRATOR (if you are the one)

  Step 5: It will change into a small window asking you connect by using the command prompt: check this option (this may vary according to manufacturing, but it should be there)

  Step 6: Now when you log in you should see X:\Windows\System32 >

  Step 7: Change of disk C, D or E (essentially select your disk where the OS is installed)

  NOTE: If NO leave are present select your ONE and ONLY by CAR.

  If left are, for example: D and E (D contains BONES, E contains - your stuff)

  Select drive with OS, i.e. D drive

  Step 8: After your decision to step 7, it would look like

  X:\Windows\System32\C:

  Step 9: The result would now be C:\ >

  SO BASICALLY WE ARE ACCESSING THE HDD FROM OUTSIDE

  Step 10: Type Chkdsk/r/f

  Step 11: wait for the results

  The first 3 steps will be complete as soon as POSSIBLE, the 4th and 5th stage will TAKE ABOUT 120 minutes (variable, based on the hard drive, the computer specifications and especially your processor)

  The result should tell you more about the DEFECTIVE AREAS, indexing ERRORS and similar stuff, and also they could be repaired.

  When finished: TUPE OUTPUT

  At the end of OUTPUT

  and REBOOT

  step 12: now even ONCE, go to the BACK UP CENTER, launch a NEW BACK UP, it should work :)

  NOTE: I appreciate the incredible help with MICROSOFT research, engineers who were very thoughtful and dedicated to get my problem sorted out and help out me.

  All these steps are suggestions for these engineers, NOT MY JOB: p

  KUDOS TO MICROSOFT AND HIS TEAM!

  See you soon,.

  Jay

  BTW: these guys who gave METHODS of TRIALS AND ERRORS, thanks to you also, I learned a lot.

• 1719 and 1904, in Windows Vista error codes

  

  Error code 1904 "Module C:\Program files (x 86) \Common Files\PctelEapPeer Authentication\PctelEapPeer.dll cannot be saved."  HRESULT-2147024703. Please contact the support staff.  ABORT RETRY IGNORE.  I hit ignore and then you get

  1719 error code - Windows Installer service could not be accessed.  Contact your support team to check that it is properly registered and activated.

  I am my only support.

  I had so many problems with Windows Vista Edition Home Premium 64 bit and now this.  I tried to install the software from AT & T and to keep these two errors.  I went to every forum, website, I find and have finally decided that I have really no idea how fix this on my own.  Many other users have almost the same problem.  I tried everything what they do with no luck. Another suggestion was to create a different user account and try to install to make sure that my account was not damaged.  I don't do that too, no help.  Same problem, same error codes. I also check in 'Services' and the Windows Installer is started.

  I ran Malwarebits (no problem), HijackThis (no problem), Root Kit/registry scan (no problem found), Temp File Cleaner (he gave me more space, which is great).  I done sfc scan and got this.  I went on the MC website to know how to read the CBS and it was a joke, I was completely lost.

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
  C:\Windows\System32>sfc/scannow
  Start scanning system.  This process will take time.
  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log
  C:\Windows\System32 >

  Another site of MS site says to run a scan SIW, or maybe this is part of the same newspaper, I did both scans, read so many newspapers, they start all jostle.  Here are the results.

  ? XML version = "1.0" standalone = 'no '? >
  -
  -
  -
  
  
  
  
  
  
  
  
  -
  
  
  
  
  -
  
  
  
  
  

  So far, I know now I "Windows Resource Protection found corrupt files but was unable to solve some of them. . And I have no idea how to do to fix on my own.

  I then found a site to tell someone else to use the "Event Viewer", I did this and the answer showed me 2 events in the event log, I tried the "journal of the events online Help" and answer has been "No response to this code" but thanks for recording it, so Microsoft knows what are the elements it can find remedies for the future for.

  I found another person in the Vista Forum "BleepingComputer", (he had an error code of 1719 and said to reregister Windows Installer by using method 2, I went to this site and it struck me to death.  I have no intention (at least for myself) mess with my registry database.  Maybe if someone could guide me through it.  I had to do things with Vista I never thought that I would have and a generally unknown translates as I did.

  I hope you can tell from this hopeless thread how I am, so if you can help me in any way, I would be greatly appreciated.

  Thank you for your help in advance.

  SFC has NOT repaired all the corruption (and there was quite a bit - not as bad a I saw but a lot nonetheless).  It explains a lot about why you have problems as long as this corruption is everywhere in the room.  The only way to correct that corruption is an installation of repair/upgrade of the system with (if you can get your hands on a real Installation of Vista drive and this is the preferred option) or do a clean install - which is where we started (but at least you know now it is necessary and why).

  I don't know what problems you have had, and which have been fixed since--but that undertake you to pretty much a clean slate and that there should be no problem to be addressed (other than the effort to restore the systems back as it was before the relocations (even the repair/upgrade system requires some effort)).  I can't imagine re-, you will encounter problems (but I do not know what they were or that ccaused them, or what you need to do to fix them is very difficult to answer this question accurately).  I can just say that all the Vista system files will be replaced by fresh copies and which solves generally most issues with the exception of a few problems of compativility with some older software, or maybe you need to update some driverss of the device (and perhaps a few other issues that are related but not caused by the Vista software).

  Thanks for the comments: is apprecciated.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.