PC Companion changed language after upgrade

Similar Questions

• Windows 7 change language after automatic update

  Dear Sir/Madam,

  I had windows 7 Home premium and using the English language page layout. However, he changes Portuguese after automatic update of windows. This is very disturbing, and it happened twice. I have a reinstall the windows the first time and won't do it again. What can I do other than upgrading to ultimate?

  Thank you!

  Kind regards

  Wil

  Take it back to the retailer under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can't change language after OS upgrade of the Sierra

  Hello world

  After the upgrade of the Sierra, my MacBook Pro has decided to return to the French.

  Now, I am unable to change the language on the menus and dialog boxes.

  I tried to put the English in language and text preferences, same problem.

  I also tried to run sudo languagesetup, same problem.

  Thanks for any help you can provide.

  See you soon!

  Language changes are not applied immediately to the running applications, but they should be applied to the applications that you start after the change is made. Changes to the Finder will apply if you raise, or to do it easily, just log out and back in.

  Log out and back in? Or restart your mac? If you didn't do it and let us know.

• Cannot remove/change files after upgrade to Windows7

  After the upgrade from Vista to Windows7 due download my files to Carbonite. Now, impossible to remove or change anything on these files & had to copy them all to have control.  When I try to change information about the files, I received a "must be an administrator to change the files' - who I am.  Because I had duplicate files it also reproduces the space used and am running out of space.  Help, please.

  Your post raises a number of questions.  What is your hard drive?  How big are your downloads?  You have the download in a folder marked read-only?  Are some of the downloads in read-only or system?  You always have the Vista files in something like Windows.old?  Do you receive messages of UAC?  You have a laptop or desktop?

  On the problem of disk space, you can buy 1 TB disks, for desktop computers inside or outside for $50, and you can buy a 16 GB FlashDrive for less than $20.  You can also do a disk management, since you have two copies of downloaded files and possibly the old Vista files.  With very large hard drives as cheap that they lost, it's pretty easy to solve the problems of disk with a new disk space.

  Good luck.

• keyboard language was changed after upgrade to 10.11.5

  After upgrading to El Capitan 10.11.5 I could no longer connect to my MacBook Air using the password. However, after a hard reboot, I could, but the computer will not accept my password, for example, the installation of an application. It would work only to restart the computer. Finally, I noticed that the keyboard language changed to English, which is probably why some characters my password was not entered correctly. Has anyone else had the same problem?

  To make sure that various keyboards are available for the connection, you can go to the prefs system/users and groups/connection options and tick the box to display the menu before when connecting.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• Change the language after CC 2015

  Sorry but I don't speak English well.

  After CC 2015 is possible to change the language of the for IN as in CS6?

  This is because I have to work with projects completed in Italian and English, and so I have to change the language after do not have then error messages.

  I currently use after CS6 and then now, just change the language in ATMLanguages.

  I'll try the trial according to CC 2015 version but I can't do the same thing, so I can't work with models made in English.

  I ask so you can change the language more quickly than in CS6 if the CC version does not work for us.

  Thanks for your help.

  Hello Zymarco

  I found this

  How to change language on Adobe after effects CC 2015 English Mac OSX or Windows - YouTube

  It works perfectly and take a minute!

  like you I just have to change the language to correct a series of expression that cannot be changed "slider" in french (or other) language

  Thanks to the developers in the world to work in English! : )

  Enjoy!

• After Effects - change language without reinstalling?

  Due to inattention, I installed in my language, After Effects, Adobe CC program (Assistant) that come by default. But I want in North American English.

  Possible to change the language without reinstalling the program?

  And a way to let the language English by default in my Adobe ID?

  So that the new facilities are in English and not in my language.

  Windows 8.1

  After Effects CC 2014 update

  Thank you.

  The CC app will automatically fetch your system language, but of course you can set any language you like. A reinstall is necessary to install the localized resources.

  Mylenium

• How to change the language after installation?

  I first download some applications in French. When I realized, I created within the ACC IN International preferences. Uninstall the hearing. Since then, it is always marked as "up to date" in the CC menu, and I still can not download again in FR... ???

  Thanks for your help,

  MF3

  Hi JFT,

  Welcome to the community!

  Please déconnexion of Creative cloud app and sign in again to see if that solves the problem, check the language after logging.

  Please download creative cloud own tool http://www.adobe.com/support/contact/cscleanertool.html and make sure that hearing is not listed, if yes please uninstall hearing.

  If still don't change the language then rename the folder OOBE in OOBE.old from the following locations:

  Windows: C:\Program Files (x 86) \Common Files\Adobe\OOBE

  &

  \AppData\Local\Adobe\OOBE name of C:\Users\[user]

  Mac: Macintosh HD > computer > library > Application support > Adobe > OOBE

  Launch creative cloud application and check.

  Thank you!

  Ankit

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• Change language windows 7 from the French into English

  You just bought an acer aspire... comment please... I live in France and have to use their own language, but I did not. The problem I have change the installed in French... in the English language. I have the premium version. I've been changing languages and all I get is to change the language of the keyboard. An offer please
  wishes for a happy new year to all

  Language - Anytime Upgrade to Windows 7 Ultimate

  To install a different language - MUI (MUI) - you must have Windows 7 Ultimate.

  Anytime Upgrade to Windows 7 Ultimate
  Type of upgrade Express in the box files and research programs in the start menu and click the Windows Anytime Upgrade.  From there, you can buy an Express Windows 7 Ultimate upgrade. Then you can enter your Express Upgrade product key and perform a simple upgrade to Windows 7 Ultimate, this is why you can install a different language.

  If you are in Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, the United Kingdom and the United States, you can use anytime upgrade. If this isn't the case, you will need to buy Windows 7 Ultimate, or buy Windows 7 in the language you need.

  http://Windows.Microsoft.com/en-us/Windows7/products/Windows-Anytime-Upgrade

  Install the Language Pack in Windows 7 Ultimate

  1. start-> all programs--> Windows Update--> optional updates.
  2. open the optional updates and go to the Windows 7 language packs.
  3 select the Language Pack that you want and press OK
  4. proceed to updates
  5. representation of Windows 7 download a Language Pack
  6 automatic installation initiated after download

  How to change the display language for Windows 7:

  1. go to start-> Control Panel-> clock, language and region / change the display language
  2. turn the display language in her choose a view list drop-down language.
  3. click on OK
  4. disconnect you before the changes take effect (this will affect only the user profile under which you are logged).

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• Heel of workflow that wfstubbuildingmachine fails after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to build machines that call the workflow WFStubBuildingMachine heel. It worked correctly before the upgrade. If we remove this workflow, machines to build then OK, but since we have many elements which occur in vCO (annotations vCenter, created group, new machine name assigned, etc.) which are called by this stubworkflow, construction of machines without it are useless to use.

  
  

  Here are the 3 heel workflows that we have configured through custom properties. Note: We have not any assigned value, but never did before the upgrade either. I guess that a value is not required as long as you agree with vCAC pick up the latest rev of the workflow when it is running?
  

  

  
  

  After asking to build a machine that includes the WFStubBuildingMachine call, there eventually times out and the following error appears in the newspapers:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. We have removed this stubworkflow of plans by removing the custom property and machines very well build.
  3. We left the other stubworkflows in the plans and build machines very well as long as WFStubBuildingMachine is not present.
  4. We also have a problem with the designer after the 6.1 update. I have separately regarding who, as we do not know if it is related or not. It seems that it is maybe not related as the other stubworkflows works fine, but not this one. vCAC Designer (cloudutil.exe) will not start after the upgrade to 6.1
  5. We cannot use designer to crack open the WFStubBuildingMachine workflow, given that the designer is broken (see #4 above).
  6. Everything after upgrading to 6.1 seems to work very well. All of the tabs in the user interface are features. All services that you expect to be running are running on the devices and the server of IaaS. Decommissioning of machine for the "machines" or machines built without WFStubBuildingMachine work correctly, etc.
  7. vCAC 6.1 vCO plugin has been installed/updated. This problem existed before we did the update of the plugin vCO and persists thereafter.
  8. vCAC Workflow Hotfix Package has been applied. This problem existed before we did the update of the plugin vCO and persists thereafter. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2088838
  9. When the upgrade to 6.1, we chose the option "preserve my latest versions of workflow. The CLI via cloudutil.exe, we can see that it has added a new rev for the workflow of WfStubBuildingmachine 6.1 (8 Rev.), then copied to rev again as the last (rev 9). Our previous rev was 8 before the upgrade. Thus, it seems that it worked as expected.

  We are very down because of this. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  One thing we're curious to know, is if the workflow of personalization as shown in this post below vCO Mathilde be run after the upgrade from 6.01 to 6.1? We didn't as long as it has not listed in guides upgrade, documentation or blog posts, but just curious if someone else did so. We did not want to do this as it will scan what changes have been made to the stubworkflows before he does. http://www.vmtocloud.com/how-to-extend-Vcac-with-VCO-part-1-installation/

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to solve with the help of the support team to the development/vCAC:

  1. Open the designer Client.
  2. Load the workflow with the question, WFStubBuildingMachine in our case. Make sure that the latest rev is loaded.
  3. Find the block in the workflow where the issue is encountered. There should be a red exclamation point.
  4. Take a screenshot of the code block and note all code/functions/variables because you will need to recreate it in a later step.
  5. Right-click on the code block and delete it.
  6. Recreate the block in the workflow and to re - establish links with the rest of the workflow.
  7. Download the workflow of heel.
  8. Leave the customer from the designer.

  It seems than the 6.1 update do not recompile / adjust workflows to heel if they refer to the DLL that are upgraded as part of the upgrade process 6.1. Our workflow to heel was making reference to a dll that has been replaced by a newer version of the 6.1 update. Following the procedure above, recompiled the workflow with the new dll.

  It would be nice if the upgrade process vCAC traveled the workflows of heel and made for you or did you call at least. I hope it's something that will be considered for a future version.

• Photostream not working after upgrade to Sierra

  I noticed after upgrading to Sierra, that my photo stream on the Macbook no longer works.

  When I connect to www.icloud.com I see that there are new photos downloaded from my iPhone to the iCloud, but not to my Macbook, no news pictures showed in Photos on my Mac. I tried login/out my iCloud on the Macbook and the iPhone account, but nothing has changed.

  Any ideas on how to solve this problem?

  Start by providing details

  What are your parameters to iCloud every IOS device on your Mac and if you use iCloud library what his status on each device

  Your message is confusing - you cannot see or access MyPhotoStream on the icloud.com - on iCloud.com/Photos see you iCloud photo library photos only - and if a device has not finished to upload to ICPL it downloads pictures

  So to help, we need to know what services you are using and what their status is

  LN

• Trackpad MacBook Pro late 2011 does not not after upgrade

  I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help.   -Note; I have to use an external mouse, and the latter is very well.

  Hello Med_,

  Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.

  You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Reset the management system (SCM) controller on your Mac.

  If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

  See you soon!