PC Companion do not reach the stage of 'Préparation' in ICS update

Similar Questions

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Some of function boxes are elongated and may not reach the OK box

  original title: Windows Vista - Control Panel customization to enlarge the font size.  Some of function boxes are elongated and may not reach the OK box

  Using Windows Vista. I used the customization Panel control to enlarge the font size.  I discovered that some boxes, like Adobe Reader Print and function, in effect, the Personaization (to reduce the font size to original size) require a click OK. But the box frame with large font size, is elongated until I can't get the OK.  How to get to the OK or reduce the size of the police without the OK?

  Simply press enter instead of OK.

• Print jobs may not reach the printer

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  If a draw is sent, he goes to Quebec, she disappears, but does not reach the printer. It shows the same problem even with the local administrator account.

  It is a network printer and works great for other users.

  Printer driver has been updated.

  Spooler service works very well

  No errors in the event logs.

  This paragraph is confusing.  The computer is now connected to a domain or not?

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  The problem you describe appears if the printer port is not directed to the correct address.  This often happens with wireless printers, but if your computer is connected to a domain, you should ask your network administrator for assistance.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Do not reach the signing of Viewer developer

  I created a generator of edition simple Viewer.

  To test my app with ipad, I tried to download the viewer developer. IPA file, but failed.

  It was downleaded but do not reach the signing of Viewer developer.

  I assumed that the folio has been affected as private.

  I try to change to the public, but there is no option I choose.

  How can I make this point?

  Can I remove my post and re - recreate?

  (I'm not even sure wheather that we...)

  Thank you for any comments on this problem... Thank you!

  Please specify if you are facing problems with the download of the file viewer ipa Builder or course it sync with your iPad?

  "In case you get an error message like' sign failed" while trying to download the file API in VB, you might have used the wrong password P12 to download the developer API. Check the password you must have used to build your P12 certificate. In case you can't make it to work, you will need to contact support to be able to modify your Application.

  If the ipa file syncs with your iPad, then probably your iPad UDID is not added in the Mobile configuration file.

• scrollbar thumb skin does not reach the bottom of the track

  I have a Flex 4.1 application when there is a vertical list, related to a table. As long as the list scroll bar is not skinned, everything is ok, the thumb oscillates up and down the track. But after the addition of a skin, it fails. The thumb never goes all the way down the track when scrolling, but blocks somewhere between the two. For the very long list of items, it even stops at halfway.

  Despite this behavior, the list is actually scrolls to the last item - so the problem is not with some elements at the bottom of the list being inaccessible, but only on the thumb not reaching the bottom of the track, which looks as if the list was stuck at halfway. The skin is very simple and it is pretty much set a picture for the track and the thumb. Is there a method to make sure the thumb always goes to the bottom of the track, the size of the list without worrying?

  Try fixedThumbSize = "true" on the VScrollBar. In addition, it can help to add constraints to the fxg. For example:

  I would like to do the same for the track to make sure that the dimensions of each component is correct. The Scrollbar skin itself seems correct.

  -Kevin

• can not reach the optionlist field in std_edit_entry within the archiving of document

  Hello all,.
  I try to customize the page to save the document in a custom component that has a resource with std_edit_entry file, what I want to do is based on a specific value in the list in the field made a specific customization.
  
  but the problem is when I do the customization on a filed optionlist, nothing happened. given that I can't assign to this topic. only can test and verify text fields; No optionlist fields.
  
  Assume that my std_edit_entry as follows:
  
  < html >
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"
  < title >
  TestCheckin htmlIncludeOrString < / head >
  < body >
  < @dynamichtml std_edit_entry @ >
  < $if not isFieldTreeEdit$ >
  < $editEntryName = $fieldName >
  < $country = $ 'xCountry' >
  < $firstName = $ 'xFirstName' >
  < $curValue = $ xml (fieldValue) >
  < $if isStrictList and isMultiOption$ >
  [[% fieldId will point to popup link (or button) defined subsequently to %]]
  < $inputFieldId = $ fieldId & "_hidden" >
  < $else$ >
  < $inputFieldId = $ fieldId >
  < $endif$ >
  
  < entry id = "< $inputFieldId$ >" < $if isStrictList and isMultiOption$ > type = 'hidden' < $elseif fieldType as 'Password' $> type = "password" < $else$ > type = 'text' < $endif$ > name = "< $editEntryName$ >" size = "<$ $fieldEditWidth >»
  < $include std_edit_entry_inputfield_attributes$ >
  < $if fieldMaxLength and isEditMode$ > maxlength = "< $fieldMaxLength$ >" < $endif$ > value = "< $curValue$ >" < $include text_field_enter_for_search$ >
  < editEntryName $if as country$ > onblur = "testFunc ()" < $endif$ > "
  / >
  
  < script type = "text/javascript" >
  function testFunc() {}
  Alert (' this is xCountry field ');
  }
  < /script >
  [[% text field can be leaves % dependent on choice list]]
  < $if useSchema and not noSchema$ >
  
  < $if not hasOptionList and isTrue(#active. $IsDependentList) >
  < script >
  < $useCurrentValue = $ 1 >
  < $include js_set_schema_field_options$ >
  < $viewFieldId = $ inputFieldId >
  < $include js_register_schema_view$ >
  < /script >
  < $jsViewName = "" $> "."
  < $endif$ >
  < $endif$ >
  < $if isStrictList and isMultiOption$ >
  < $include std_select_entry_special_selections$ >
  < $endif$ >
  
  < $else$ >
  < $if isQuery$ > < name span = "< $fieldName$ > _displaySpan" > < / span > < $endif$ >
  < $endif$ >
  
  < @end @ >
  
  < / body >
  < / html >
  
  Suppose the xCountry field is a list of Table-see with countries. and the xFirstName field is that a text field can be filled out by your name.
  in the example above, the onblur function does not work because the field is list, if I change the field to be xFirstName text, the onblur function works fine.
  
  so I can't test on the value of the option list fields. I tried to do my check * < $if editEntryName as country$ > onblur = "testFunc ()" < $endif$ > * "
  inside a special control, also does not work as:
  -$if fieldIsOptionList$ >
  -$if fieldHasOptionList$ >
  -$if isOptionList$ >
  -$if hasOptionList$ >
  
  any help or any suggestion to reach and affect the fields in the list.
  
  Note: the version of the AAU is 11.1.1.1.6
  
  Published by: Najdawi on 6 may 2013 07:27

  But the problem now that what I'm trying to change it, nothing happened. try and javascript code, add static text, change ID--> but no reflection that's happened.

  Where have you changed it?

  Note that the same include can be included in multiple components (patches), and you need to change the one with the highest loadOrder or (recommended), create your own custom with a container resource component understanding and having raised enough loadOrder (that you will have to do anyway).

  Try doing a search for <@dynamichtml std_option_list_entry@=""> in standard and custom components. Brutal force might be to change each of them (I put a static text in front of the)<>

  Note that sometimes for the need to restart the server to enable changes (here, it shouldn't be necessary, but it will do no harm).

• Air3.0 and the softKeyboard listed is not on the Stage.focus = InputTextfield on iOS

  RC1 of Air3.0 and earlier versions of air, I could invoke the softkeyboard for iPhone/iPad by doing this.

  Create an inputtext field, set its width and height to 0 to hide

  Then, when I want to show the software keyboard, simply do:

  internship. Focus = txtCapture;

  Where txtCapture is my text entry field. When I wanted to hide it, I would simply fix the stage.focus to any other object.

  This great worked up to 3.0 was officially released and now the softkeyboard is not on the fixed focus, it appears that if manually click you on the input field itself, but since you cannot use the center alignment, or any other formatting on the text for the iOS input fields, I can't see

  
  Anyone have an idea how I can get the softkeyboard to appear?

  Hi Dave,.

  internship. Focus = txtCapture will not work after 2.6 and it is known.

  > How can I get the softkeyboard to appear

  Please use:

  txtCapture.needsSoftKeyboard = true;

  txtCapture.requestSoftKeyboard ();

  Above API will certainly work.

  Thank you

  Nimisha

• Cisco WLC 2504 - Access Points do not reach the controller

  Hello world

  We bougth a Cisco WLC 2504 with two AIR-AP2702I-UXK9 Access Points. The problem is that the AP do not join the WLC.
  The output from 'show join ap stats' shows the following:

  (Cisco Controller) > view join ap stats summary all the

  Database Mac EthernetMac AP AP name IP address Status
  00:35: 1a: B1:A9:60 00:f2:8 b: f4:1 has: 9 c AP00f2.8bf4.1a9c 192.168.10.23 joined not
  00:35: 1a: C9:99:B0 00:f2:8 b: 77:b7:fc AP00f2.8b77.b7fc not joined 192.168.10.24

  (Cisco Controller) > show join ap 00:35:1 detailed stats to: b1:a9:60

  Synchronization phase statistics
  -For the synchronization request has received... Does not apply
  -For the synchronization completed... Does not apply

  Discovery phase statistics
  -Applications received discovered... 114
  -Answers success of discovery... 114
  -Discovery failure processing... 0
  -Purpose of the last unsuccessful attempt of discovery... Does not apply
  -Attempt to finally successful discovery time... 20:15:40.106 16 June
  -Discovery attempt ultimately unsuccessful time... Does not apply

  Join the live statistics
  -Join applications received... 57
  -Join sent successful responses... 57
  -Processing of the join request without success... 0
  -Purpose of the last unsuccessful attempt to join... Does not apply
  -Attempt to join finally managed time... 20:15:50.414 16 June
  -Join finally failed time... Does not apply

  Configuration phase statistics

  -Configuration requests... 114
  -Answers configuration successful... 0
  -Processing configuration failed... 57
  -Purpose of the last unsuccessful attempt to Setup... Invalid license in the application configuration
  -Attempt to finally successful configuration time... Does not apply
  -Time finally failed configuration attempt... 20:15:50.810 16 June

  Last the decryption of the AP details failure messages
  -Last message decryption failure reason... Does not apply

  Details of recent disconnection AP
  -Last AP connection failure reason... Does not apply
  -Last reason for disconnection AP... Unknown failure reason

  Latest summary join error
  -Type of error that occurred in the last... Application of configuration rejected LWAPP
  -Reason for the error that took place the last... Invalid license in the application configuration
  -Time which occurred the last error to join... 20:15:50.810 16 June

  Details of sign-out AP
  -Last AP connection failure reason... Does not apply
  Ethernet Mac: c 00:f2:8 b: f4:1 has: 9 Ip address: 192.168.10.23

  Would be grateful for the help.

  Best regards
  Marc

  Hi Marc,

  Make sure first that your controller has software code 8.0.x or above, if first better it. Here's the code recommended by TAC

  http://www.Cisco.com/c/en/us/support/docs/wireless/wireless-LAN-Controller-software/200046-TAC-recommended-AireOS.html

  Then, try the UX above deployment guide to begin. Under Advanced tab WLAN, you need to enable "of the first universal ap' in order to use this app provisioning & connect to the AP.

  If you have more than 1 AP, then you must start 1AP using this application. Other access points that you can feed them upward, while AP original is also powered, so they'll use protocal called NDP & start them automatically

  Let us know how it goes

  HTH

  Rasika

  Pls note all useful responses *.

• Impossible to update, cannot unlock the drive, may not reach the store, nothing on the start screen

  Symptoms...
  1. After several months of work perfectly, I made a mistake (details below) and attempted to retrieve a previous Restore Point.
  2. the system always starts ok, and some things work.  However...
  3. some applications don't work anymore, for example, Logitech SetPoint.
  4 files Explorer remember settings and defaults to each invocation.
  5. various Windows settings have been lost.
  6. the Windows 8 start screen has only 'Start' and my login ID.
  7. I can't update the system or re-install the system.
  8. "change system settings" does absolutely nothing.
  9. I got error messages saying my system disk is locked and I need to unlock it, but I can't do it.  None of my disks is BitLocker on, and I can't find any other meaning of "locked".  The message is "the drive where Windows is installed is locked. Unlock the drive, and then try again. »
  10. I suspect some programs of Windows 8 system are corrupt or lost, but the OS is clearly still Windows 8 in appearance and behavior.
  What I tried...
  1 clean the registry with various cleaners.
  2. checked with Windows Update, the software has been completely updated.
  3. the Windows troubleshooting diagnostic tool has not helped.
  4. the same problems occur in Mode without failure.
  5. always had problems after a clean boot.
  6 sfc/scannow (as admin) did not help.
  7. I can't do a simple Refresh or reset because I can't go to the store.
  8. out of desperation, I tried updating to Windows 8.1 Overview, but it doesn't have to say that my system disk is locked.  I couldn't find sort of the 'unlock'  BitLocker is off anyway.
  9. I downloaded the installation of window package 8, created an ISO file and burned a DVD.  Tried to repair and regeneration, but both failed.  Once more, the error message said that my system disk is locked.
  10. I am very reluctant to throw my applications, I have over a hundred installed.  In any case, I'm afraid that if I format the system drive, I won't be able to install Windows 8 in all.
  How it all started: I made a mistake...
  I installed the Gavotte RamDisk and then tried to delete it, forgetting that I needed to run 'as administrator '.  This does not, without saying why, so I removed with Control Panel etc.  Once I did, things started to go wrong.  Previous restore points did not help, and after floundering about in frustration and growing desperation, I ended up here where I am now.
  The system...
  1 MSI motherboard (Z87 - G43)
  2. 2 x 4 GB Corsair Vengeance RAM (CMZ8GX3M2A1600C8)
  3. three SATA drives, each with two partitions
  4 DVD burner
  5 external USB floppy
  6. two analog monitors, one connected via a digital-to-analog converter (powered)
  7 keyboard and mouse Logitech wireless
  8. USB printer cable
  9 LAN with another PC of Windows 8 that works properly
  10. access to on and old XP laptop
  WHAT CAN I DO?  I HIT THE BUFFERS!
  The Solution
  ========
  The result was much better than I expected.
  If you take the road to Microsoft to fix the system, it offers a 'Refresh' or 'remove all and reinstall '.  These two failed because they require access to Microsoft Store.  However, there is a middle path to fix, as long as you have a product key, which re - install Windows 8 as if it were an 'upgrade '.
  The process is described quite well here:
  http://www.TechRepublic.com/blog/Windows-and-Office/quick-tip-download-a-new-copy-of-the-Windows-8-upgrade-ISO/
  In summary, download the upgrade of widows 8 components and create a picture ISO of DVD, you must burn it to a DVD.  Then, you use this disk to re - install Windows 8.  The great thing about this is that it offers keep your files and settings.  (However, as it is an 'upgrade' it does not provide the option to install on another partition.)
  In my case, it worked much better than I expected.  Most of the Windows settings, I thought were lost forever, have been restored.  It's as if she restored settings that he did not know that there :).  Instead of spending hours putting my system after re-setup, I was able to relax, take an evening away from the PC!
  Thanks to the person who responded to my original query.

• can not reach the homepage of the 10 g XE

  Hello
  
  I run windows XP sp3, when I try to connect to the XE 10 g IE says 'Internet explorer cannot display the webpage' - no work Firefox. The sql command line works. Browsers are trying to connect to the address: http://127.0.0.1:8080 / apex. Also I have a graphical user interface written in java witch writes and reads from the database, it has worked fine for months now, I get the exception: the network adapter could not establish the connection.
  
  I think that the problem started after installing the ESET NOD32 anti virus, but I'm not sure.
  
  
  Ioannis Papaioannou
  
  Published by: IPapas on Αυγ 17 2011 10:09 μμ

  OK, let's try present first:

  Rename the listener.ora, one indicated above in starting tnslsnr... out, say, to listener.ora.old.

  lsnrctl stop
  lsnrctl start

  If that does not start with success the listener, bring the listener.ora on restore config.

  Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = ioannis-k3kiarz) (p)

  What command returns:

  host name

  32-bit Windows error: 1001: unknown error

  This seems a little strange, but hope that it is not so important.

  Published by: orafad on August 18, 2011 10:52

  Published by: orafad on August 18, 2011 12:58