PC Diagnostic tool indicates problem with WiFi - Satellite Pro A100

Similar Questions

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• PC diagnostic tool does not not on Satellite Pro L300

  When I try to run the utility Toshiba pcdiag.exe I get an error message.

  The details of this message say that the 'fault Module name is KERNEL32.dll.

  I uninstalled the utility programs original and downloaded the files updated on the Toshiba site, with the same result - I always get an error message.

  This fix is there for that?

  Thanks in advance for your suggestions.

  Hello

  Are you using Vista or Win XP OS?

  I checked the page European driver of Toshiba and the PC Diagnostic tool has been published only for Win XP.

  I think that might have something to do with your Windows operating system installed.
  All first as you should check if the PC Diagnostic tool is compatible with your operating system and secondly, you must update the OS before install you this tool.

  Good bye

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Two problems with my Satellite Pro A200

  Hello

  I just bought a laptop Satellite Pro A200 of lamia with windows Vista.
  I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.
  Thank you

  > I found I can't connect to the internet or install hardware such as cameras or printers. The installation of the system software, but the actual hardware does not work. at first, I thought that it was not compatible, but I wonder if USB ports work correctly supposed that no matter what I connect to the top, cameras, printers, mp3 pc can't find the element even if it is automatically install advice?

  Indeed some older hardware options are not compatible with Vista. But if the 3rd party software supports Vista will not be problem using these devices.
  You know that Vista is a new OS and Microsoft releases patches and fixes regularly very important.

  I noticed this last fix that resolves to many USB issued under Vista:
  http://support.Microsoft.com/kb/941600/en-us

  I recommend the update to the Vista from time to time to fix some bugs in the OS

  > Also, I am trying to connect this pc to my existing internet connection on a desktop computer. Any advice on how to do it because nothing seems to work. Cable and wireless and the laptop has an internal modem.

  As you say your laptop is capable WLan so why you n t use the Wlan?

  I also recommend this site MS how-to:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  concerning

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• Problem with putting satellite Pro 6000 switch

  In recent weeks, I have a problem with my laptop to start. With the battery or not, the situation seems to be the same. Even when I remove the battery and plug in DC. Then the Green led DC lights, but pressing the button does not turn on the laptop.

  Sometimes, after a few attempts for laptop turns all of a sudden, but dies after a few minutes or seconds. Then turn on non-diode, or DC-led is orange flashing.
  Is the service inevitable?

  Thx for the answer.

  Hello

  Yes, I'm afraid.
  If the domain controller is plugged in and the indicator light will Flash orange then I guess there is a problem with the hardware.
  Maybe a dysfunction of the motherboard.
  The Toshiba service partner should check the laptop. Guys can read the flashing code and I'm sure they will solve this problem.

• Restart problems with my Satellite Pro A200 when my dynadock is connected

  Help!

  I m a little frustrated when I try to restart or shut down to the bottom of my Satellite Pro A200 with my dynadock connection. I always turn off my 1st printer, as this used causes an error message, but the laptop crashes with the XP window...

  I have analog external (I know, anawhat?, but they work) speakers connected to the front, makes no difference whether they have or not. Drive external DRIVE is connected via USB2 port back and my LAN cable. I think I've tried everything, however continue to suffer Frost :)))

  Any ideas?

  Lot

  There may be some compatibility issues with your printer software and software dynadock
  Who knows. A thorough investigation would be necessary.

• Satellite Pro A100 becomes warm while playing a game

  I had a problem for some time with the Satellite Pro A100 when I play games.

  I'm glitchy spells during the game, sometimes with the fan runs much and the laptop is very hot.

  Is there something I can do?

  Hello

  As you've probably experienced peripheral internally as CPU and GPU have to work with the best performance all in game. This leads to higher heat dissipation.
  If fans and the internal vents are clogged then the CPU and the GPU may not be cooled properly and may lead to overheating

  What can you do? You can ensure that your vents are free of dust and debris, and that air can circulate properly.
  I would recommend so clean the fans with a jet of compressed air. These aerosols can be ordered from dealers different computer/laptop.

  In addition, don t use the laptop in the bet, couch or on the knees because the cooling fans would be stuck and this would lead to a higher temperature.

  Good bye

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• Satellite Pro A100 RAM compatible

  I found this RAM: http://www.misco.co.uk/productinformation/~100564~/product.htm?affiliate=2004

  Can someone tell me if it would be compatible with my satellite pro A100?

  Thank you

  Hello

  These modules must be compatible:
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network