PC doesn't recognize phone when connected in Vista

Similar Questions

• Computer does not recognize the phone when connected via USB

  original title: usb recogonozation

  I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

  As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

• MOBILE PHONES WHEN CONNECTED TO MY LAPTOP DOES NOT DETECT NOT

  When I had connected my phone via a data cable. It does not detect my phone.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Unable to activate bluetooth for pc Dell 1545. Downloading the software? and still not able to turn on bluetooth. Control Panel doesn't recognize all bluetooth connectivity

  Check updates for bluetooth and found 2 on Dell updates. Downloaded both, but when entering the control panel and clicking Add, nothing happens. Do not see the bluetooth icon on the task bars and no ACK on Control Panel

  Hello
   
  Do you see excalamtion mark next to the bluetooth module in Device Manager?
   
  Also check if the bluetooth module is listed in the Device Manager.
   
  Follow these steps and check if they help.
   
  Step 1:
   
  Make your devices bluetooth discoverable and taken in charge by your operating system.
   
  Step 2:
   
  Uninstall and reinstall the Device Manager bluetooth modules, and check if it helps.
   
  a. Click Start, type "Device Manager" in the search box and press ENTER.
  b. click on continue. The Device Manager dialog box appears.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the list of device types, click bluetooth module,
  d. right click on the device, and then click Properties.
  e. click on the driver tab.
  f. click on uninstall. Click OK.
  g. in the Device Manager dialog box, click the Action menu and click Scan for hardware changes.
  h. restart the computer automatically reinstall the drivers.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Manager of office blackBerry Smartphones does not recognize BB when connected

  My BB curve is connected, but the Desktop Manager does not - at least the backup button is grayed.  I have 4 usb ports & have tried them all - I tried 2 different cables.  I uninstalled the dm, restarted the computer & BB.  Help, please.

  Visit this link:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

• Damaged my iPhone 5.  Receipt of replacement and went through the steps of activation.  All transferred very well - I thought.  Now, the phone only works when connected to wifi.  Help!

  Damaged my iPhone 5.  Make an insurance claim and received a replacement.  Has passed through the stages of restore/update / back.  Everything seemed to go well.  However, I can only send/receive texts or to use the phone when connected to wifi.  Saved settings and recontroler.  Nothing works.  Help!

  Hello

  I'm sorry to hear that you are not able to use your cell phone... Well well... like a cell phone.

  I suspect the 'texts' you send and receive through iMessage, not your cellular service provider network. When you look at the top left of the screen, it does not say 'search' or does it see the connect to your provider's network?

  Have you tried the steps If you cannot connect to a cellular or cell - data Apple Support Network?

• Still play songs from my iPhone when connected to wifi

  Had this problem before, but it stopped happening a while ago only to re - emerge with the iOS 10 update.

  I'm running on an iPhone 6 and used to play my music library on shuffle.

  Over the years, I've deleted some songs from my library of songs, but they remain available for re - download in iCloud.

  However, from time to time, if I play songs on shuffle when connected to wifi, one of these songs removed will be available on my phone and play.  It does not download to my phone and still only available for download on iCloud.

  Is it possible to stop these removed songs to play on quite my phone when connected to wifi?

  I'll add that I'm not on all subscriptions either except to increase my storage iCloud.

  Post edited by: sound_man

  I believe that you open the music application, select "download music", then make your choices from there.  If you do not select the "download music" it will first play all the songs that you have purchased.

• Recharge phone when it is connected to the PC

  Is it possible to charge my phone when it is connected to my PC?

  Your phone should automatically start charging once connected to your PC. However, if you connect to directly (for example through a hub USB not powered), it may not be able to require power.

  John, if you still have problems of load, can you give us some details on how you have your DROID connected and what type of computer you connect to?

  Ex: Connection with the USB cable provided by Motorola, to my computer [brand] [model].

• I play with my lap top and accidentally decliques the network to which the computer used, now when I login it doesn't recognize me, I can't even on the desktop to fix

  Microsoft windows xp professional

  Ctrl alt del to access

  and then type the password

  doesn't recognize me any more that I décliqués the wrong box to change the settings of the home network

  Hello
  
  1. is your computer connected to a domain?
  
  If your computer is connected to a domain environment I would ask you to contact the administrator of the computer.
  Your journal Id and password is checked on the network, since you are not able to connect to the network it is why you are unable to connect.
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer doesn't recognize internet connection

  My HP dv6000 family Window Vista premium Service pack 2 64-bit does not recognize my internet connection (local area connection or wireless network connection). The network icon has a red x and it says not connected, but actually I am connected to my wireless network. Also on the network and sharing Center I can't see any connection (no map) but don't forget, there is a connection with my wireless (a Netgear router on my desktop computer); If I open my wireless connection, he said that the network type is an Access Point. How can I change this? How can I make my connection wireless private when the connection does not appear on the network and sharing Center? I deleted my wireless network and set up again and always say the same thing.

  I am able to use the internet, but I can't update any program using the updated window or another service on my laptop. I already did a restore of the system, but all that the same stills. Can anyone help me please with this situation? I have tried everything I know, but nothing seems to work.  Thank you.

  Hello

  I saw the Red X problem before but not with any other questions you have.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  After the foregoing:

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Then:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Do the same for network (NIC) cards - then right click on the devices and UNINSTALL.
  Reboot - it will refresh the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as
  Loves Vista updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART.

  ---------------------------------

  Other tips:

  If you are using a wired cable-

  Panel - Manager of devices - adapter - (NIC) - double click on the Advanced tab and set
  'speed & Duplex' at 10 Mbps full duplex and try 1/2 duplex. Be sure to APPLY / OK. Maybe
  help here: (don't forget the answer is complex, because there are probably more than a single)
  thing at the origin of the problem)

  ---------------------------------

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the wrong network
  device. You can try to disable any other network such as the WiFi device and restart it to see if it
  has an effect.

  Still a hardware such as a network card problem loose which is not properly attached to the computer
  can cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  Hope these helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.

  Original title: CDs? DVD not recognized

  My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.  No error message does nothing! ???

  Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)

• BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

  About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

  But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

  1.) several reboots my computer (windows vista)

  2.) update/reinstall Blackberry Media Sync, then by restarting my computer

  3.) reconnection from blackberry to the computer, then open Media Sync

  4.) Open Media Sync first and then connect the blackberry to the computer.

  5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

  6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

  None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

  Is there something that I miss or have not yet done? What should I do?

  Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

  Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

• BlackBerry Smartphones phone hangs when connected via USB

  Hi I have a Pearl 8120. There is a problem where the phone will break if I connect it to some PC via USB.

  When I say that it blocks the screen turns off and the red light stays on. To recover from this point, I have to unplug and reinsert the battery.

  But for example if I connect it while the PC is not started in Windows so it will not crash.

  When I connect the phone via a charger cable is also very good, and never, it hangs on my own PC at home.

  Is there a way to fix this?

  Hi, it seems that too much effort for reload software blackberry at this stage.

  Although I solved the problem by changing the option "Auto enable mass Storage Mode when connected" guest.

• Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page.

  Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.

  have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.

  Thanks for help

  Best regards

  the problem has been resolved.

  I forgot to write rel = "stylesheet", that was the problem.

• C# examples fail with "Failed to recognize the type of server or the version when connecting to the host"

  I am currently submitting work for P2V conversion from a c# application. I tried to run the application remotely and on-site, but I get this error message (here is the full error):

  "< detail > < InvalidArgumentFault xmlns =" urn: Converter ' xsi: type = "vim25:InvalidArgument" xmlns:vim25 = "urn: vim25" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < vim25:faultCause > < vim25:fault xsi: type = "ConverterNotSupportedConnection" > < hostName > RSMITH < / hostName > < / vim25:fault > < vim25:localizedMessage > impossible to recognize the type of server or the version when connecting to the host "RSMITH". " < / vim25: localizedMessage > < / vim25:faultCause > < / InvalidArgumentFault > < / details >

  RSMITH is the name of the machine with the VCenter Converter Standalone (5.0) and where I wan the VM to go. It's a Windows 7 SP1. I'm under .net 4.0 winform.

  Any suggestions? I'm pretty much run the sample out of the box, except for wrapping a winform around it instead of an application console.

  Cannot you telnet from your Converter machine on the source IDE oucederomsurlesecondport 9089 machine?