pc failure cannot re - install xp
IBM PC crashed, OS is Xp. tried to repair with a dell recovery cd receiving the message 'cannot find file ahzpyivc.sys. syten keeps restarting. do I do .cant get to the office. crashed due to Trojan c_pec
You cannot set an IBM computer with a Dell drive. Contact the manufacturer of the computer and see if you can buy a disc for your IBM PC. They are usually relatively expensive.
Tags: Windows
Similar Questions
-
Hello
I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »
So I found this answer: How do I install Windows 8.1 on Haswell MBP
But then I received the same error.
Tried this: http://macriot.com/mcrt/?p=2362
But fdisk TPG allow me to change anything, as the SIP is enabled.
Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.
So now I'm stuck on all fronts. Any ideas?
Thank you
RedPanda
1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.
2. the legacy BIOS/MBR method requires a hybrid MBR.
3 EFI/GPT is recommended for your specific model.
4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.
5. you will need to convert the FAT32 partition space using the following OS X Terminal
diskutil eraseVolume free disk0s4 FREE
This will return an error, because free space is not associated with disk slices.
6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).
7. do not install W7 in Boot EFI, because it has some difficulties.
8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.
9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.
-
Dreamweaver 2015 CC - extension cannot be installed - version 6 or later
Hello
I'm on PC with windows 64-bit 8.1
I loaded cc dreamweaver 2015 and extensions, both Manager downloaded Adobe CreativeCloud.
REF: Adobe Dreamweaver 2015.0 CC ~ BUILD 7714
If I try to load an extension I get the error "this extension cannot be installed, dreamweaver version 6 or higher."
I tried to load an extension of PVii .zxp.
I rebooted DW and the EM 3 times now with no joy.
I see it works here, but I see that this person was running windows 7, so it didn't really help me.
https://forums.Adobe.com/thread/1317178
I see in the post above, that it is mentioned
"It seems that Dreamweaver cannot find the extensions Manager.
Here's a way to check if dreamweaver 13 is installed or not:
(1) install "Extendscript Toolkit CC" compared to the creative clouds
(2) launch, enter "BridgeTalk.__diagnostics__;" (excluding quotation marks)
(3) click on "Debug-> Run", you can get the information in the "Javascript Console" window at the top right.
(4) check if dreamweaver-13, 0 have been listed in the "Objectives" section, and they have the path correct and exename. Alternatively, you can paste this information out here. "
I have downloaded and run the Extendscript Toolkit CC and it gives the results below.
====================================================================//
ExtendScript Toolkit CC START
======================================================//
Result: BridgeTalk Diagnostics
----------------------
Info:
Name = estoolkit - 4.0
Status = PUMPING
Group = cs
Path = C:\Program Files (x 86) \Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe
Version = 2.0
Build = 4.5.5
Next serial number = 40
Logging: OFF =
= Now 08:50:56
Messages:
Version message = 2.05
Authentication = WE
Digest = WE
Thread: estoolkit - 4.0 #thread
Interval pump moy. = 47ms
Last = 94ms pump there is
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Manager = undefined
STATUS: PUMPING
Timeout = undefined
Manager = undefined
HAND: HAND
Timeout = undefined
Installed = Manager
LANCE: LANCE
Timeout = undefined
Installed = Manager
DIAGNOSTICS: DIAGNOSIS
Timeout = undefined
Installed = Manager
INFO: INFO
Timeout = undefined
Installed = Manager
SETUPTIME: thread = 0ms, left = 15 ms
Timeout = undefined
Manager = undefined
Forums: 3
#dbg estoolkit - 4.0:
MSG [08: 50:56]: 00000035
@BT > version = 2.05
Target = estoolkit - 4.0 #dbg
Sender = estoolkit - 4.0 #dbg
Sender ID = localhost:win5828
Timeout = 08:50:57
Type = ignore
Request-response = Timeout
Headers = (no header)
Timestamp = 08:50:56
Serial number = 35
Receipt = undefined
Result = undefined
Error = undefined
Body = (empty)
Entrants: 1
Outbound: 0
Manager: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = to only msg #35
Error = for only msg #35
Timeout = to only msg #35
Result = to only msg #37
Error = for only msg #37
#estk estoolkit - 4.0:
MSG [08: 50:56]: 00000037
@BT > version = 2.05
Target = estoolkit - 4.0 #estk
Sender = estoolkit - 4.0 #dbg
Sender ID = localhost:win5828
Timeout = 09:00:56
Type = Debug
Request-response = result error
Headers = (no header)
Timestamp = 08:50:56
Serial number = 37
Receipt = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = < engine properties get = 'main' object = "$.global" exclude = "undefined, builtin, prototype" all = "true" max = "20" / >
Entrants: 1
Outbound: 0
Manager: 1
ExtendScript = for all messages
estoolkit - 4.0: (main)
Entrants: 0
Outbound: 0
Manager: 1
ExtendScript = for all messages
Target: 3
Connector = PCD
Installed: 0
Running: 0
Dreamweaver - 16.0.64:
Path = C:\Program Files\Adobe\Adobe Dreamweaver CC 2015\Dreamweaver.exe
Display name = Adobe Dreamweaver CC 2015
MsgAuthentication = WE
MsgDigest = WE
ESTK = OFF
Status = (not running)
ExeName = Dreamweaver.exe
estoolkit - 4.0: PUMPING
Group = cs
Path = C:\Program Files (x 86) \Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe
Display name = ExtendScript Toolkit CC
MsgAuthentication = WE
MsgDigest = WE
ESTK = WE
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = 4.5.5
Next serial number = 44
Logging: OFF =
= Now 08:50:56
Messages:
Version message = 2.05
Authentication = WE
Digest = WE
Thread: estoolkit - 4.0 #thread
Interval pump moy. = 47ms
Last = 313ms pump there is
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Manager = undefined
STATUS: PUMPING
Timeout = undefined
Manager = undefined
HAND: HAND
Timeout = undefined
Installed = Manager
LANCE: LANCE
Timeout = undefined
Installed = Manager
DIAGNOSTICS: DIAGNOSIS
Timeout = undefined
Installed = Manager
INFO: INFO
Timeout = undefined
Installed = Manager
SETUPTIME: thread = 0ms, left = 15 ms
Timeout = undefined
Manager = undefined
ExeName = ExtendScript Toolkit.exe
EXMAN - 7.0:
Group = cs
Path = C:\Program Files (x 86) \Adobe\Adobe Extension Manager CC\Adobe Extension Manager CC.exe
Display name = CC Adobe Extension Manager
MsgAuthentication = WE
MsgDigest = WE
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = CC.exe Adobe Extension Manager
Installed: 2
Running: 1
Groups: 143
CS3:
Acrobat - 8.0
AfterEffects - 8.0
Soundbooth - 1.0
Bridge - 2.0
contribute to 4.5
devicecentral - 1.0
Dreamweaver - 9.0
reminder - 3.0
estoolkit - 2.0
Fireworks - 9.0
Flash - 9.0
Illustrator-13 0
InDesign - 5.0
indesignserver - 5.0
InCopy - 5.0
Photoshop - 10.0
first - 3.0
PremierePro - 3.0
Collection - 1.5
Hearing - 3.0
CS4:
Acrobat - 9.0
AfterEffects - 9.0
Soundbooth - 2.0
Bridge - 3.0
contribute to 5.0
devicecentral - 2.0
Dreamweaver - 10.0
reminder - 4.0
estoolkit - 3.0
Fireworks - 10.0
Flash - 10.0
Illustrator-14, 0
InDesign - 6.0
indesignserver - 6.0
InCopy - 6.0
Photoshop-11
PremierePro - 4.0
hearing - 4.0
SOUL - 1.0
EXMAN - 2.0
CS5:
Acrobat - 9.0
AfterEffects - 10.0
Soundbooth - 3.0
Bridge - 4.0
contribute - 6.0
devicecentral - 3.0
Dreamweaver-11 0
reminder - 5.0
estoolkit - 3.5
fires of artifice-11, 0
Flash-11 0
Illustrator-15, 0
InDesign - 7.0
indesignserver - 7.0
InCopy - 7.0
Photoshop-12. *.
PremierePro - 5.0
hearing - 5.0
SOUL - 2.0
EXMAN - 3.0
flashbuilder - 4.0
flashcatalyst - 1.0
TS1:
captivate3-en_us
captivate3-en_US
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
TS2:
Captivate - 4.0
EL2:
Captivate - 5.0
AS1:
Acrobat - 10.0
TS3:
RoboHelp - 9.0
FrameMaker - 10.0
CS55:
AfterEffects-10, 5
hearing - 4.0
Bridge - 4.1
contribute - 6.1
devicecentral - 3.5
Dreamweaver-11 5
reminder - 5.1
estoolkit - 3.6
Fireworks - 11.1
Flash-11 5
Illustrator - 15.1
InDesign-7, 5
indesignserver-7, 5
InCopy-7, 5
Photoshop-55. *.
PremierePro - 5.5
SOUL - 2.5
EXMAN - 5.5
flashbuilder 4, 5
flashcatalyst - 1.5
standard - 2.0
el25:
Captivate - 5.5
cs60:
AfterEffects-11 0
hearing - 5.0
Bridge-5. *.
contribute - 6.88
devicecentral - 4.0
Dreamweaver-12 0
reminder - 6.0
estoolkit-3, 8
fires of artifice-12, 0
Flash-12 0
Illustrator-16. *.
InDesign - 8.0
indesignserver - 8.0
InCopy - 8.0
Photoshop-60. *.
PremierePro - 6.0
SOUL - 6.0
EXMAN - 6.0
flashbuilder - 4.52
standard - 2.0
Prelude - 1.0
SpeedGrade - 6.0
el60:
Captivate-60. *.
TS4:
RoboHelp - 10.0
FrameMaker-11 0
CS70:
hearing - 6.0
Bridge-6. *.
Dreamweaver-13 0
reminder - 7.0
fires of artifice-13, 0
Flash-13 0
Illustrator-17. *.
InDesign-9. *.
indesignserver - 9.0
InCopy-9. *.
Photoshop-70. *.
PremierePro - 7.0
SOUL - 7.0
EXMAN - 7.0
FlashBuilder - 5.0
Prelude - 2.0
estoolkit - 4.0
AfterEffects-12 0
el70:
Captivate-70. *.
CS70:
standard-3. *.
cs90:
Bridge-6. *.
Photoshop-90. *.
estoolkit - 4.0
----------------------
====================================================================//
ExtendScript Toolkit CC END
====================================================================//
~
====================================================================//
BEGINNING OF THE LOG FILE GENERATION *.
====================================================================//
I also followed this
Please generate log file
1. create a file named "ExManCoreLibLog.YES" in the folder "C:\Users\ < YourUserName > \AppData\Roaming\Adobe\Extension. If this folder does not exist, you can create everything first. Please note that Windows will hide the default file extension, please click 'Organize'-> ' folder options and search "->"View"in Windows Explorer, then uncheck"Hide extensions for known file types"to make sure that this file has hidden".txt"or other extensions.
2. launch the CC extensions Manager.
3. once the launch is completed, close the CC extensions Manager.
4. the ExManCoreLibrary.log log file can be found in the same folder.
The result of my log file are as
Log File results beginning *.
[Error] Sea 18 Nov 09:00:32.592 2015 (ExtensionBase.cpp, 129)-CExtensionBase:validateExtension: searchAllSupportedProducts(), a State failure =-411!
[Error] Sea 18 Nov 09:00:32.608 2015 (ExtensionBase.cpp, 607)-CExtensionBase:install: failure of validateExtension() for zxp C:\Users\***\Documents\Dreamweaver extensions 2015\pvii 2015\P7_PowerToys_191.zxp, status =-411!
Record the results of file END *.
====================================================================//
END OF THE LOG FILE GENERATION *.
====================================================================//
~
====================================================================//
Log start *.
====================================================================//
I also tried to close everything and logging out and screw logging of cloud, but has not made a difference. "I closed entered them Creative Cloud." > Preferences. > sign out. »
====================================================================//
Log end *.
====================================================================//
I am grateful for any input
concerning
Christina
OK after trying this for several hours, it's only NOW that I see PVII have created their own extension manager 2015 for cc.
http://www.Projectseven.com/products/em-test.htm
IN the last 5.5 DW is a great software, but sad to see at what level adobe leaned to the with the CC version.
concerning
Christina
-
MacBook will not be upgrading to El Capitan - "cannot be installed on this computer.
I'm trying to upgrade a macbook to El Capitan but I get this message from the app store: "this version of Mac OS x 10.11 cannot be installed on this computer."
If I click on "Learn more" nothing happens. We just bought this macbook off ebay and it seems to have had a clean operating system installed and I just ran the update of the program, so everything is up to date.
This is a Macbook 4.1, Intel Core 2 duo 2.4 ghz, 2 GB of memory. It is currently running 10.6.8.
I searched the forums and online and see no reason why it won't even download the update... Any help would be appreciated!
This computer has a 32-bit EFI and cannot be updated past 10.7.5.
(143236)
-
I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error
Try to reset the App Store:
Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).
Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.
Then reconnect to the iTunes Store.
Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.
-
Bootcamp windows cannot be installed on drive 0
during the installation of windows bootcamp, an error appears during the game windows up that says cannot be installed on disk 0 partition 1,2,3 or 4. What now?
Please visit https://help.apple.com/bootcamp/assistant/6.0/ .
-
When going through the process of downloading with social monkee and reach the point add it to firefox, I get the following message: "social Monkee cannot be installed because firefox is unable to modify the required." How can this be repaired?
Which is usually caused by a lack of unpacking the directive (< em: unzip > true < / em: unzip >) in the file install.rdf to this extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
-
Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.
I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.
I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.
See also the official website of FSH
-
When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.
This has happened
Each time Firefox opened
I tried to download firefox.
User Agent
Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)
When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.
When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.
If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.
A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.
-
Hi all
My iMac features are:
- 27-inch, late 2013
- 3.2 GHz Intel Core i5 processor
- 8 GB 1600 MHz DDR3 memory
- Start drive Macintosh HD
- NVIDIA GeForce GT 1024Mo of 755M graphics
- Storage: 301,35 free GB of 999,35 GB
Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016
Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office. During installation, the following error message appears:
"OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".
I would be very happy if someone can help me in installing this update.
Thank you.
Slpm6
I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.
You are using a newer version of El Capitan that the updater contains and so cannot install it.
(139598)
-
Hello
During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.
I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.
Problem: I get the cannot install because it is a GPT partition.
Y at - there no way to make these 2 USB sticks work?
Thank you, Brad
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.
The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.
After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.
If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.
In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".
I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
DisplayLink Core Software cannot be installed on this operating system - Dynadock
I have an other laptop manufacturers, and I want to use it in my home office, I bought a Toshiba Dynadock. I installed the software and, during this process, a message is displayed as follows:
"DisplayLink Core Software cannot be installed on this operating system"
I have Windows XP Professional, version 2002, service pack 1
I checked my Services and DisplayLink is NOT present. All other elements of the Dynadock work very well (keyboard, mouse, camera, network etc.), but the screen is blank and I have to use scren laptop which goes against the whole object to have the Dynadock first!
What can I do to load this software? Are there settings that I can change to allow the DisplayLink load?
Any help welcome!
Hello
I'm not expert Dynadock but one thing is very interesting. According to your assignment, you use Windows XP Home SP1 edition. I wonder what will happen if you have installed SP2 with all latest updates.
I don't know about you, but maybe you really need to install SP2. I don't see any other reason why this software cannot be installed.
-
Windows XP Home edition cannot be installed on the Satellite P200
Hello
Sorry, but my English is not good.
I have a Satellite P200-17 b, model PSPB3E...
The problem: it has VISTA installed, but I need WXP as operating system.
Windows XP Home edition cannot be installed because it cannot find the hard drive.What can I do?
It's Windows XP SP2 home edition ProfessionalCan someone help me?
Thank you
JürgenFirst
Download your PC card mother SATA driverhttp://www.toshibatech.NET/f6flpy32.zip
This file exract disket diskette
then
open by pushing pc F12
Open with the XP CD
floppy drive in pc -
14 - d008au drivers cannot be installed in windows 8
Nice day! I just got this laptop HP 14-d008au 14 inches and my questions are: when the package brought me there no any cd or dvd for all drivers, second, the OS is ubuntu when I changed to Windows 8 some drivers of your Web site when I run it, it cannot be installed. Thirdly the wifi and bluetooth does not work (it does not acknowledge wireless internet and devices). I can't use this thing because of some missing hardware and drivers. I hope for your immediate response regarding this issue. Thanks in advance
artclarabel wrote:
I'm sorry for my typo fault mistaken his 14-d008au.
Hello
All drivers for your laptop you are on the following link:
My suggestion: go to the site above, and then click scan now . In the end, it may have one or two missing and view the hardware id of the driver missing return. The following link shows you how to get the id of the hardware:
http://www.WikiHow.com/find-hardware-ID
Kind regards.
-
AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem
AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem.
tried several times but nothing helped.Please help.i need to the installed program because I am a civil engineer and without this program, I have all sorts of problems.Hi Anuppandey,
1 Windows operating system you are using?
2. What is the full error message you get?
Autodesk does not officially support the versions of AutoCAD and AutoCAD LT 2009 and older on Windows 7.
As a work around you can try to install the program in compatibility mode and check if it helps, here is the link:
Make older programs in this version of Windows
You can also view the following link support Autodesk for more information:
Microsoft Windows 7 and Windows Vista compatibility
Hope this information is useful.
Maybe you are looking for
-
Function key stuck on - Satellite L25
Hello I have a Satellite L25-S1215. I can't get the key to unlock. Tried to use the utilities, but no option to turn off the FN keys (I will never use them). Initially, laptop starts and I can't connect to windows, but after that, the function key wi
-
When I try to download my updates, they will not download
Every time I have try and download my updates, which they continue to not download
-
Do not see the list of available updates
I have 17 available updates, but it is not in the selection screen. screenshot: http://www.ddaigle.net/update.jpg Is there a way to fix this?
-
When I turning the printer off and then on power, he immediately tries to print a test page.
HP Photosmart C3180 all-in-oneWindows XP 32 bitno error messageunaware of any change in system - color cartridge is empty, black is not
-
Hello Is it possible to run full scan on MSE without apparently keep her. If I put it to analyze and go outside that is not sleep to increased all when I go home. I tried with the screen saver turns off but still the same. Basically, I want to co