PC fan put Loud/fast

Similar Questions

• Qosmio F30-112: cooling fan runs very fast

  Hello

  I want someone ask them, my computer laptop qosmio F30 - 112 recently whenever I start my computer, I heard that the cooling fan runs very fast (I mean) it wasn't stop differently than before his execution smooth only I heard when I play games but not continuous, then after that my computer now running slow.

  Can someone help me what im going to do?

  Thanks: rtmasagca

  Hello

  F30 is a little older series laptop I think about 3 years or more... you cleaned the cooling modules in the meantime?
  I think there is a lot of dust and debris inside the laptop and I think that keeps air from traffic and therefore fans run faster.
  Try the compressed air jet that should help to remove dust and debris.

  Good luck

• Satellite C660 - 23 M - fan runs loudly every 5 seconds

  Hi all

  I bought my first PC Toshiba laptop * 3 days * ago and until this am pleasure other than the cooling fan runs loudly every * seconds * 5 for heaters * 13 seconds *.

  Even my old laptop has never done this in their entire years of use, I feel that something must be wrong.

  Is the laptop faulty? and I would stay there until the failure is caused and my warranty runs out?

  Or y at - it an easy fix? (fingers crossed)

  I use the laptop for a fairly long period of time but do it on a carpet of cooling at all times which is not help.

  Thank you very much
  Adam

  Try it please change the settings of cooling method.

  Open the power settings for the management of the power supply you are using > change advanced power settings > Toshiba Power Saver Settings > cooling method > change two optimized battery options.

  It should reduce the activity of fan cooling.

  Please send comments.

• Fan runs louder every 2 minutes

  Hello

  Anyone have a problem with the fan? Because my fan going stronger for all 2 minutes like 20 to 30 seconds, if the volume is about 15% the fan is louder than the laptop. How can I solve this problem?

  Try it please change the options of cooling method in the power settings.
  Power management open you use > avancΘs > Toshiba saving settings > cooling method > use optimized battery option.

  After making this fan should work not so often and laptop will last much quieter. I use the same settings on my Tecra A11.

• Hi, my computer shuts down randomly and the fan is very fast and strong

  the fan is constantly fast and strong, my computer frequently stops randomly usual when some sites of casino play slot machine

  Probably the heat, especially if it's a laptop.  You have blown out through the etc air vents?

  Are using you it on a flat, hard surface (or is it in your knees)?

  We need the specs of your system.

• TouchSmart HP Envy 15 - fan runs loudly

  This morning, I needed to recharge my phone. As the laptop has resided on the ground, I lifted one side of the laptop until you find the power plug-in and accidentally slipped my hand. The height of drop is about a foot or less. Then I booted up my laptop, it ran for a few seconds and turns off. I started again and this time it works correctly. However, the fan runs loudly and he will not stop until I turn off my laptop. I guess the bit is as strong as the 2nd level of the fan. Does that mean something is wrong with my hardware/driver? Help, please. Thank you.

  This should help:

  http://support.HP.com/us-en/document/c01007591

  Also:

  http://support.HP.com/us-en/document/c01657439

• HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

  Hello
  
  I have a HP Z620 workstation.

  My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

  I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

  I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)
  
  My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)
  
  Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

  With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

  My problem:

  1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

  2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

  3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

  4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

  Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

  Thanks in advance for your time.

  MR. J.

  Juggerknight,

  Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

  In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

• Fan runs so fast on Satellite A300D

  Hello world!

  My machine's Satellite A300D 17-F with Vista!
  For a long time, it was a problem that is on the HARD drive because of the bad sectors. I guess that I solved it with a program called blast4 maxtor. I've implemented it to xp sp3 and it became faster.
  But fan! Fan does not work so fast :) I try power saver driver but it was not configured.

  What can I do?

  If you want to slow forward speed replace cooling method option min level.
  This option, you can find in the Toshiba power saver tool.

• HP Pavilion dv6t-7000 CTO: fan making loud noise, need of replacement but can't find it

  So my laptop fan started to make really loud this rattle sound. Makes me very self-consciousness of me when I'm in public, so I just Don ' t bother bringing them along. But I really need my laptop with me. The noise usually comes out randomly.

  I tried the HP part Store selector and in the fan section it lists just the fan button, which is not what I need. I think I need to completely replace the fan at this point (I tried to fix the problem of cleaning the fan out of the dust to check it for possible damage, but can not find what is the problem).

  If anyone knows where I can find a spare for my laptop fan and I have to buy with all heat sink heat and thermal paste? I'm pretty experience in the repair of the computer so I have confidence that I can do, more my warranty expired in 2014, so I don't be invalidated anyway.

  If it helps any, the product is of # A3E83AV.

  The noise is usually caused by a defect in the fan motor bearing.

  You were on behalf of the incorrect item.

  What you need is the discreet thermal module, which contains the fan a heat for the CPU and video sink.

  The part number for the product number of your laptop is 682061-001. It's on the document next to the web HP PartSurfer.

  http://PartSurfer.HP.com/search.aspx?SearchText=A3E83AV

• Satellite P100-160: cooling fan comes loudly for 1-2 seconds every 30 seconds

  I have Vista and I tried everything.
  I set the thermal control mode in the BIOS to "Silent" (although sometimes I look in the BIOS and it is up to the performance). I have disabled Aero, changed the minimum and maximum processor speed etc..

  The irregular, loud fan noise leads me into the wall! I'd rather work permamnently at volume slightly harder than that! The laptop is great, but if someone said "I'll give you a full refund" I would like a shot - only on this noisy fan irritating each ch. 30 seconds!
  Can anyone help? I suspect not - I suspect Toshiba needs to work on its drivers and maybe a BIOS update. I kind of feel that I am at the edge "bleeding" here with this purchase. I have other problems too that I'll post separately.

  Hi David

  I'm sure that any comment as if it was normal will be good enough for you, but there is really not much to do. You can try to play with the power settings and see if something will be better.

  Two weeks ago, I did some experiments with P100 and I installed my Vista with the necessary drivers and tools only. I was positive surprised how Vista works now. If possible, remove all the stuff that you don't need. The fact is that much preinstalled stuff running in the background and force CPU to work under pressure. I really don't see another solution at the moment.

  In my opinion it has nothing to do with the drivers, but perhaps with BIOS. We'll see if Toshiba will offer soon new updates to the BIOS.

• Satellite P500 - fan too loud and makes clicking noises

  I recently bought a Toshiba P500 - in late October / early November, and recently the hard drive continuously flashes when there are noises rattling from the laptop (even if im not doing anything)

  Also my fan will get random REALLY loud but usually run mediumly hard all the time, I rarely hear really calm even when I start it first to the top and nothing is running

  The laptop itself is on my desk and high upward so that the fan is fully ventilated, as the surface is regularly wiped away (about twice per week)

  Hello

  If the clicks or hit its happening with disk HARD high use and sounds like a light tap with a light hammer on wood then this is your HARD drive and not necessarily fan.
  Fans usually have a hummimg and more regular sund whining when not.

  First thing I would do is take you a laptop somewhere cool temperature and prepare to back up the files on your HARD drive if you have not already.
  Second thing, it is to install a utility that will allow you to analyze the indicators SMART for your HDD (s) - mine has 2 drives x 500 GB, that should tell you if the HARD drive it's about to die.
  There is also a diagnostic utility called PC Diagnostic tool available via all Prorams/TOSHIBA/utilities if you have it installed.

  I would look then by contacting your local Toshiba support center to get your macine checked and covered in any warranty replaced elements.

  BR /.
  Rob

• The fan runs super fast. HP Compaq dc5100 SFF

  These days HP Compaq dc5100 SFF - or fans have aired the apparently fast fan speed.

  Was full of dust (to the point of blocking the absorption on the front fan)

  Used an AIR CAN blow the dust out with the lid open.  We also had a blip of brief power in the last days - caused a stop down.  And we have updated some business software.  Has been restarted.

  We have 3 more of the same model which are OK

  Thanks for any help

  The SFF dc5100 is notorious for bad capacitors on the motherboard.  I had one where the fan ran at top speed all the time.  There was a swollen capacitor located at the end of the PCI 1 connector.  It seems C469.  It's a 6.3 volt 1000uF cap.  I replaced the capacitor and that fixes the problem.  To keep the computer cool lengthens the service life of capacitors.  It is wise of the dust periodically in order to cooling air flows.  How always, once a capacitor going bad, the only solution is to replace it.  A burned capacitor will be inflated. The flat top normally will be curved upwards and, possibly, a leak of a crispy Brown material.

• Can I force my fans to work faster?

  I have HP d530 and 2 ordinary fans attached to my motherboard. Is it possible to make my fans to work at full speed or at least 80% of it? There is no option in the BIOS and my motherboard does not support the fan speed.

  Thank you!

  On HP computers, it is impossible to make the fan runs faster because you do not have the ability to control the

• My Lapotp Fan blow so fast and goes down after 5-7 Minutes I start playing games... Why...?

  My laptop is after 5-7 minutes after I play games... I usually play FIFA 12 and sometimes GTA vice city... My laptop model is HP430... My computer laptop fan starts to blow so fast it looks like my fan will fly... Pls help me with the solution...

  Hello

  The machine runs too hot, please try the following methods to keep most fees:

  http://News.Yahoo.com/blogs/technology-blog/keep-laptop-cool-172740363.html

  Moreover, it is not a game machine.

  Kind regards.

• Yesterday, I did the 2016-002 security update and also updated Safari 9.1. My MacBook Pro was working fine before, but now fan runs loudly and Activity Monitor wrote in red "Safari Web content (not answer) with an impact energy of 99.8.» How to fix?

  trouble after Safari 9.1 update - noisy fan - warning of "Safari Web content (not responding)."

  Click the Apple, top left, and then select force quit, ForceQuit Safari in the list.

  Restart Safari.