PC freezes and can only shut down manually

Similar Questions

• 27 "2013 mac only shut down using the power button / stop, is this a problem or a part of the new system

  After my upgrade that Mac is not closed by using the drop-down menu option, it also seems to crash the finder.  Finder raises with force quit.  I can only shut it down using the power button.  Is this a bug/problem of a part of the El Capitan?

  Wacom tablet software is known to cause this problem. Options:

  Uninstalling the Wacom software

  Completely and remove items from connection

  The Wacom driver update

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

  Original title: Windows 7 problem

  I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

  Hello

  Here are a few questions to better understand the issue:

  1 made only while off log?

  2. what happens when you restart?

  3 have you tried with different user accounts?

  4 you did changes to the computer before the show?

  Let us try the following and see if they help.

   

  Method 1: Check the event viewer for more details on this subject.

   

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  Method 2: Run the following fix:

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  Method 3: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 4: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

• I tried to close my bank account this morning. I learned that itunes Bill AED1 twice but was not deducted from my card again. They said that they can only close down the account, once itunes deducted from my card. Please notify

  iPhone iOS 9.3.4 - I tried to close my bank account this morning. I learned that itunes Bill AED1 twice but was not deducted from my card again. They said that they can only close down the account, once itunes deducted from my card. Please notify

  Have you added or changed the details of payment or the address on your account and received temporary store operating expenses: on the payment card's authorization in the iTunes Store - Apple Support ? If you have your card issuer should automatically remove charges within a few days or more

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• hold the SHIFT key too long and can only type 1 hits a second...

  hold the SHIFT key too long and can only type 1 hits a second...

  You have turned on the FilterKeys , which slows down the speed of repetition of the keyboard.  To disable it, go to Control Panel > Classic view > Accessibility Options . Steve Winograd, Microsoft MVP (Windows desktop experience)

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Brother Hl-2270DW with Dell Inspiron Mini printer. It is not on the Mini CD and can only find HL-2170DW.

  Trying to activate my brother Printer HL-2270DW with Dell Inspiron Mini.  It is not on the Mini CD and can only find HL-2170DW.     How can I get this printer to connect without using the disc?

  Please do not let your Windows version a secret.

  Find the driver here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl2270dw_all

  Install the driver and then connect the printer.

• Get the error when after the desktop is loaded: "search parameter was a problem and will be shut down."

  original title: definition error according to the office is responsible.

  the search parameter error message had a problem and will be shut down. This happens when startups while remaining on the desktop.

  Hello

  1. What is the exact error message you get?

  2. have you recently made changes to the computer?

  I suggest you to see the site mentioned below:

  Step 1: Safe Mode

  Start the computer in safe mode and check if the problem persists

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  If the problem does not persist in star safe mode the computer to the boot and see if the problem still occurs.

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

   

  I also suggest you to see link below:

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.microsoft.com/kb/308041.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Warning: As there is a possibility of loss of data after the upgrade on site I suggest you make a backup before the operation.

   

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• an error message appears indicating the pc has a problem and the computer shuts down

  an error message appears saying the pc has a problem and the computer shuts down.

  What do you do when this happens?  It is the way in which computers to protect the components of your computer.

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Satellite C660 freezes and can disable it

  My laptop is Satellite C660D with windows 7.

  I had for a month when it started freezing 3/4 minutes after I logged on, being completely insensitive with the keyboard does not not or ctrl + alt + del or the touchpad, so the only thing I could do was to disable it.
  The freezing happened whenever I was on my laptop, I used system restore my laptop back to factory conditions, and he stopped freezing. It was in June, now it started to do exactly the same thing, he has done it before, freezing and be unresponsive!

  My laptop does not freeze in safe mode, no one knows what is the problem and why it continues to freeze a month after my laptop as long as the factory restore?

  Thank you

  On this virtual path, that it is not possible to provide accurate diagnosis but it must be a software related issue. perhaps is this freezing problem related to some software you have installed or perhaps Microsoft updates.

  What you can do is to start your computer in safe mode, and then set the startup option. With other words to define what applications, utility tools aor should start with Windows 7.

  Please after THAT or the instructions of THIS do. Remove check box before all the software not associated with Toshiba and that is completely useless (can be started also).

• Installation of updates and the computer shuts down

  By turning on the computer it goes to 3 of 3 updates to the installation, then stops. This happens several times and am unable to turn on the computer. I brought the laptop with Vista already installed on it, not so no disc
  I am out of resources on how to solve the problem!

  Hello Barby,

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe . When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  • Incompatible system files have been installed.
  • A Service Pack installation has failed.
  • A backup program used to restore a hard drive does not correctly restore files that may have been in use.
  • An incompatible third-party program has been installed.

  Step 1:
  You can try the above troubleshooting steps I have provided about the "configuration updates 3/3. 0% complete".

  Step 2:
  Please follow the troubleshooting steps mentioned in the link below
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;156669

  Step 3:
  Otherwise, please try the steps below to restore your computer to the last working state.

  (1) start the system using a Windows Vista DVD.
  (2) system will ask you to «Press any key to boot with the CD or DVD...»
  3) press enter or another button to continue...
  (4) "thewindow installation" will open. Click Next.
  (5) choose the option "repair your computer" in the next window.
  (6)the system recovery options window"opens. Choose the Option 'System Restore'.
  (7) now select 'System Restore' window you invite, and then click Next.
  (8) he will ask the 'restore to choose Point".
  9) click in front of the box 'Show Restore Points more than 5 days'.
  (10) select the date on which Office worked very well. And then click Next.
  (11) 'drive to confirm to the recover window"will ask you choose Drive where the OS (Operating System) is installed." Click Next.
  (12) confirm your Restore Point window will be fast, click Finish.
  (13) A pop up you will be asked to continue the restoration of Windows. Click Yes.
  (14) the system will begin to restore the operating system for the selected restore point. Once finished with this the system will ask you restart indicating that the machine is restored successfully.
  (15) reboot the machine.

  By performing the steps mentioned above, system will be re-recorded on the date on which it was working fine.

  Note

  : S ' ensure that to disable your automatic update function after the restart, to avoid to automatically download patches.

  [If this post can help solve your problem, click "propose as answer" below or the "Vote as helpful" button at the top of this message.] This way you can help others find the successful resolutions of questions].

  ---