PC watch display error message driver stops responding and it was retrieved successfully

Similar Questions

• I am a message error display driver stopped responding and has recovered what should I do to fix this?

  I have OS windows 7 and my computer model compaq laptop presario CQ60... can you tell me the link from where I get this update drivers?

  I have OS windows 7 and my computer model compaq laptop presario CQ60... can you tell me the link from where I get this update drivers?

  Hello

  What you see is called the TDR (time display and recovery) process in action.

  This component is designed to prevent damage to the computer when the video device is nearby to crash the system. In earlier versions of windows when the display device ran out of resources throughout the system would stop responding, requiring a hard reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx (written for Vista, but also applies to Windows 7)

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  When this situation occurs, windows tries to recover by restarting the display device. If she can't get it back, you will see the blue screen.

  This happens more often when you play graphics intensive, but can occur with any process that uses a large amount of graphic resources, for example, when editing or creating videos.

  What you can do to avoid these problems:

  Make sure that you use the latest graphics device driver.

  Manage your work time with programs that are graphic-intensive, quit other programs that might also use a large amount of resources.

  Also read the following article:

  Display driver stopped responding and has recovered the error message in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/2665946/

  Concerning

• Error message: display driver stopped responding and has recovered

  Original title: I get an error message of...

  I get an error message... display driver stopped responding and recovered... then I get also get with her driver Intel Graphics Accelerator Driver for Window display 7 (7) is not responding and successfully recovered. also sometimes the screen just flickers...?

  Thanks for your help!

  Try to download the latest driver for your graphics card.

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

  Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

  Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

  After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

  -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

  -Power supply has been connected to the time

  N ' was not overclocked as it is when using disk HARD aswell

  It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

  This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

  Need to know your opinion on this please, may not know... (Radeon HD 6490M)

  Thank you

  Hi @skibbles,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

  Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

  Please let me know how it goes.

  Thank you.

• Please help to choose the order of drivers when I get the "Display Driver Stopped Responding and has recovered" message

  Running: Win7 - XPS 8100 8 GB - 64 bit OS

  Graphics card: ATI Radeon HD 5450

  Serial number ADMIN NOTE: maintain the label removed by privacy policy >

  Hello

  Recently I get this message as the computer freezes momentarily and then recovers.

  "Display driver AMD driver stopped responding and has successfully recovered."

  I checked the support for Dell drivers and received conflicting results.

  When I checked with the help of system analysis, it gave me a list of the 54 system-wide updates. How could it be possible?

  When you use the label of my service, I got the following result:

  ADMIN NOTE: maintain the label removed by privacy policy >

  Don't you think that's what I use, and if yes, can you tell me who I should first put to date? Finally, what I have to uninstall the old drivers and update via the Device Manager?

  Thanks in advance for your help,

  Jane

  54 updates is not necessary. You should only update a driver to correct a specific problem. You don't need to remove the video card driver before installing a newer version.

  * Go here
  * Click on download
  * The file should save on your windows desktop
  * Double-click the file
  Follow the instructions

• in autocad, 2012, if I get any command, the screen goes black and 1 "after return and display this message"display driver stopped responding and has recovered,

  "display driver stopped responding and has recovered, display driver Intel Accelerator for windows 7 (R) is not responding and has successfully recovered".

  My loptop is a HP Pavilion dv7 i7 intel procesor, 6 GB ram, graphics card intel HD3000, 64-bit

  Have you checked for any display driver later by the manufacturer of the graphics or your machine?

  You have a display driver earlier that you can 'Dismantling' to?

  Using the feature to restore the driver for Vista (or Win 7)
  http://www.Lockergnome.com/Windows/2007/09/21/use-the-driver-rollback-feature-of-Vista/

  AutoCad can run in Mode without failure?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried right clicking on the shortcut to the AutoCad program, or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

• Display driver stopped responding and has recovered

  Product: HP Pavilion dv7-6015tx Entertainment Notebook PC

  OS: Windows 7 32-bit

  Status: Clean installed Windows 7 Ultimate 32 - bit Windows 7 Home Premium 64-bit

  Hello

  I had several cases where the computer seems 'lag '.

  then, after a few flickers on my screen, Windows would give the error:

  "Display driver stopped responding and has recovered."

  There are still effects after this message.

  When dragging windows, scrolling top-down graphics etc. continue to Flash.

  This isn't all in hardcore, the GPU was not operating at high temperatures.

  Interestingly, I don't have this problem when I'm in the middle of hardcore games.

  The CPU was not under heavy load, the CPU was not working at high temperatures either.

  I checked the temperature with thermal control (HWiNFO32).

  I have a lot of resources, 1223MB of RAM to spare.

  I also have lots of HARD disk space too.

  I installed the latest version of the graphics driver for my product: AMD graphics driver high definition,.

  but the problem persists.

  Help, please!

  -John

  I understand your frustration, I had the same problem, I really did, for centuries!

  Try this:

  Do not go on the AMD website for a video driver. those who do not work properly for some reason any...

  Download on the HP site specific to your HP product, for example, I have a dv7 6015tx with 32-bit windows.

  Then I'd go to: dv7-6015tx drivers

  If you still have the drivers on AMD ATI Web site, uninstall them, restart.

  Go to the HP site where you can find specific drivers for your product HP, installation, restart.

  It seems trivial, but it's IMPORTANT and most of the time to restart after uninstalling and installing.

  It worked for me, hopefully it will erase your questions, good luck.

  -John

• Display driver stopped responding and has recovered the problem

  I got a Dell Inspiron M5040 with Windows 7 for Christmas 2011 and I started to use Windows Live Movie Maker, but whenever I get in the middle of editing a video, the screen went black for about a second and says "display driver stopped responding and recovered." The first time this error message has occurred, the laptop computer itself restarted and is went to a blue screen with the text, telling me to go into some sort of 'safe mode' (I couldn't read the text in time). I have all the latest drivers, my laptop is new, only yesterday lit.

  What can I do about it? I really want to use Movie Maker. I'm new to the Forum, so I hope someone help me. Thank you very much. Any help is appreciated.

  Hi James

  What you see is called the action process.in TDR (Timeout, recovery of the display).

  In earlier versions of windows when the display device ran out of resources throughout the system would stop responding which would require a reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  This happens more often when reading graphic intensive games, but can occur with any process that uses a large amount of graphic resources, such as you see when you edit or create videos.

  What you can do to avoid these problems:

  1. only this type of procedure when the laptop is connected to a source ca.

  2. in prior to starting video editing, restart the computer.

  3. close all other running programs to ensure that all graphics resources are available for video editing.

  Windows Live Movie Maker Help Center - what is the system requirements? :
  http://explore.live.com/Windows-Live-Movie-Maker-system-requirements-UI

  Concerning

• Brand new XPS 13 "display driver stopped responding and recovered."

  Bought a new model of XPS 13 9350 with windows 10 with touch and just literally there for a day... Love everything except for the message that appears when just surfing... just with the exception of this little message that keeps popping up in the taskbar "Display driver stopped responding and has recovered"... screen will go black for a second and work again. It happens like every 10 minutes about... sometimes more... sometimes less...

  I already try to update the latest driver for the graphics card in the Device Manager... What should I do? Have I not a lemon? I call for assistance? Return this laptop? I don't feel that a 1300 laptop should be having this error on the first day only when you surf. Of course, I paid less because of the sale Black Friday... but still, top of the range Dell XPS should not do this...

  Any solution? I love everything on this laptop except for this...

  You need the version 20.19.15.4331.
  Load the page Dell drivers or update in Device Manager.

• Satellite L500 - display driver stopped responding and has recovered

  Hello

  I have a concern about an error in my pc...

  the error is "display driver stopped responding and has recovered."

  I had been reinstelled the windows as well as search apdated inter display driver

  but I did not...

  I appreciate all advice and guidance about this problem...

  Thank you very much

  Something like that happen on my machine, but not so often, especially when I want to see video content in the browser.
  The reason why it knows me not, but I'm worried about this until the driver is recovered and I can use my machine as usual.

  Have you noticed if there is a particular situation when this happens?
  T happens quite often or just from time to time?

• Satellite A500-1GH - display driver stopped responding and has successfully

  My laptop is the A500-1GH and I bought it 2 days ago...
  My problem is that, for the fourth time, the screen went black and then recovered and I get the message "display driver stopped responding and was retrieved successfully." My graphics card is Nvidia GeForce 330.

  I'd appreciate it if anyone knows what to do to fix this

  Thanks in advance

  Hello

  Looks like the graphics card driver crashed for no apparent reason.
  Have you tried to reinstall the graphics driver?

  To do this.
  Visit the page of European Toshiba driver and download the driver for this model of laptop. Update the driver and restart the device.

  It would be interesting to know if it would help.

• Pavilion15 - ab123ur (P7R37EA): "display driver stopped responding and recovered."

  Hello! I have a problem with my laptop video card. The error "display driver stopped responding and has recovered" appers then I'm playing video games or working on my graphic editing software.

  I tried to google the problem. Tried to reinstall the reivers video, to recover the BONES with the backup, but nothing helped. It seems that the problem appeared first, when it was a huge update of the windows like 1-2 months ago, but I don't know. Maybe it's not soft problem at all.

  Can you help me solve this problem?

  HI @trufinol,

  If you have followed all the steps then, please use the following http://www.hp.com/contacthp and create a folder for your question and call HP.

  If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Re: Qosmio X 500 - 11Z - display driver stopped responding and has recovered

  REF: PQX33E-02J00TCZ

  Hello, I had this problem:

  my friend bought new Qosmio for games... and the problem is with the graphics card Nvidia GT 360 M
  graphics card says this: display driver stopped responding and recovered... the screen flashes twice and its ok.
  its when I start windows (windows 7 HP 64 bit) or when I click in the Device Manager on the graphics card, on Internet when I surf... ordinary work, anything heavy for laptop as this :-)
  I changed my driver - standard uninstaller, then clean the pc with cc cleaner and install new drivers
  error still persists to say that...

  I tried the drivers nvidia and support toshiba official. the same two. problem remained.

  can anyone help?

  Hello

  To be honest, it is one of the most annoying problem in this forum. You can find many threads dedicated to, display driver stopped responding and has recovered, problem. There is no good solution for it. I solved this problem by installing a driver from nvidia.com site viewing, but I Gt 230 m. Don't know if this can help you too...

• Spectrum 360: Display driver stopped responding and recovered - spectrum 360

  Just in case someone is looking for a (kind of) solution to this problem:

  Location:

  -New spectrum x 360, came loaded with Windows 10. All updates (Windows and Intel and HP) made.

  -When you scroll websites with Firefox, the computer hangs for about 5 seconds, you get the message "display driver stopped responding and has recovered. Display driver intel HD Graphics Drivers for Windows 8 (R) answers more and was successfully'

  -Open the browser windows are black, but can be restored by reducing to a minimum then them openeing again

  -Sometimes on a variety of Web sites. EBay seems one need to reproduce, but this can be linked to the amount of scrolling rather than any specific web content. Scroll through the eBay ads I get it about every thirty seconds

  

  I guess it's a driver problem, possibly wait a version 10 of Windows. The solution for now is to use the browser of Microsoft Edge.

  In Firefox, go to options, then Advanced tab then general uncheck the use hardware acceleration