P2V domain controller (for a test, the new virtual will not be connected to the network or used in production)
I wanted to check that won't affect my physical domain controller by performing a P2V migration to this subject, we would like to P2V our current DC (in production) to put in our test environment, it's so we can simulate one pass from 2008 to 2012. I would just check that install VMWare converter and performing P2V migration on the active domain controller current WILL NOT affect our current physical machine.
Can someone advise?
DC and P2V = Don t do, since there is absolutely no guarantee that the DC P2Ved work. I had horrible experience during a migration of a data center to a new provider, the provider told us that P2V would be perfectly viable and that they had done several times. So ultimately they tested migration P2V, everything worked. Then, the day of the passage to the they did it again and AD did not come to the top. In the end we had to make a member server new rollback, as well as on the website of the provider and a classic dcpromo Setup does the job.
Tags: VMware
Similar Questions
-
Windows Server 2003 P2V domain controller
I tried to understand the best way to do it. We have a backup domain controller that is programmed to be either P2V would or recreated as a virtual machine. Whatever it is, it's going to happen in our cluster HA. I wonder if we can make just a P2V using the converter bootable without problems or would it not be better to organize a new virtual machine, and then go through the process of promotion and demotion. Has anyone ran into any ING questions P2V one domain controller? I can't really find any advice on this with the exception of a Microsoft document. I looked on the forum and the exchange of Experts, and the general consensus seems to be, just do not do. It is best to start from scratch. I said why? What happens when you P2V one domain controller? If this isn't a secondary domain controller, so what about the PDC? Are there unwritten rules on that? A white paper that can be nice to look at? Any help that anyone can give would be great. For us, the easy way is to P2V, but if this isn't a good idea, then I guess we have the opposite effect.
Found this blog relevant today!
... Do online physical to virtual (P2V) conversions. Every P2V conversions for computers in domain controller role should be offline...
-
I would like to take advantage of the special CreativeCloud of prices that ends today 8/28, but my new computer will not happen for a few days. What is the path of least resistance?
Just a random adobe employee, but it is probably best to sign up today for the service and then just wait for happen to install and download the software from the computer. Trying to get the discount retroactively applied sounds quite a bit more difficult, and you can set the account from any computer without installing anything.
-
When I click on the '+' to the right of the last open tab on the tab bar, a new tab will not open. Help, thanks, Jim
The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Uninstall this extension.
There are a few places to check for the Ask toolbar:
- Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
- Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
-
HP Pavilion 550-055na: new disk will not install the new operating system
Hello
I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.
My problem is that the new copy of Windows 7 will not install on my new hard drive. I get:
Violation of secure boot
Invalid signature detected. See the policy in the configuration of secure boot
Then me to a black screen after I pressed Enter/Ok, who said the following.
Check the presence of the media...
Media present...
On IPv4 PXE boot.
If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:
Realtek PCIe GBE Family Controller IPv4
Realtek PCIe GBE Family Controller IPv6
and the output by using the arrow keys
How to change the secure boot strategy? If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?
Any help would be appreciated to greately.
Sincere greetings
DJ
Hello:
You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.
Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.
-
All of the new apps will not regenerate content news. 4th gen AppleTV. A reboot updates/import new news stories. I am rebooting apple TV every day! A single application (ABC) has a date in him saying 'news' June 30 even and will not update to July 1 until I start apple TV! I have sssume, since the problem is with all the applications that it is a matter of Apple TV or a network problem?
Your Apple TV IS always connected to the network when this happens.
-
My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why. The deskjet printer shows that there is a wireless connection.
Hi Mpsfeldt,
Thank you for using communities Support from Apple!
Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.
To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.
Best!
-
Management of permissions for users on the network.
Hello
My question is General and related to xp and windows 7 as well.
Can someone explain to me how to manage permissions for users on the network? It's easy to do the job when I talk to local users, but I can't find a way to add computers to the dialog box object types. I have only options of theses: built-in security principals, users and groups. In the locations list, I see only my computer and cannot find how to add computers to all networks.
Thank you
For Windows XP, it makes a difference if "Simple file sharing" is enabled or disabled. Simple file sharing is * always * activated if you have Windows XP Home Edition and it is the default setting in XP Pro. Sharing files Simple enabled, * all * users who are connected to a network on your machine are forced to authenticate on the machine as the 'Guest' user - which means that you have no user authentication in Windows Home or XP Pro without disabling Simple file sharing. This means that every network user has access only to files to the files which has permissions for the Guest user.
If you have XP Pro and disable Simple file sharing, then you can ask users to authenticate on your local machine and give everyone access to its own set of file permissions. If the user connects to a network computer that contains the same user name and password that the user is currently logged on the local computer, the authentication is automatic.
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874/en-us >
HTH,
JW
-
For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.
Hello
1. this problem occurs only with this particular update?
2 did you change on your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can reset the Windows Update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
Method 2
You can read the article.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756
Method 3
Step 1:
Place the computer in a clean boot state.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a. click Startand then click run.
b. type msconfigand click OK.
The System Configuration utility dialog box appears.c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.
When you are prompted, click restart to restart the computer.
Step 2:Download and install the update from the link.
Update security for Windows XP (KB2719985)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282
See also:
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
-
"For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »
This message appears whenever I try to open Video Edit Magic, I already turned off Norton.Try to adjust the compatibility setting and run...http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
-
The new update will not install.
The new update will not install. (it is said there is a problem with a file called spill.aex)...
I tried to delete after effects to reinstall, but who doesn't either so now I can't the legacy at all.
THE FIXED!
I changed the name of the card effects that included the broken file. (still cannot delete the file itself :/ but at least after effects works again!)
-
My computer is Windows Vista and I pay for Photo Shop CS6, but it will not download. Can I download the CS5 and how?
Photoshop cs5 is designed to:
Windows XP with SP3
Windows Vista Home Premium, Business, Ultimate or enterprise with SP 1 (P2 S recommended)
Windows 7
Photoshop cs6 is designed to:
Processor Intel Pentium 4 or AMD Athlon 64
Windows XP with SP3 or Windows 7 with SP1
CS6 applications support also Windows 8 and Windows 8.1.
* Video features are not supported on 32-bit Windows systems.
* 3D features are disabled and some features of mercury from the improved graphics engine may not work with less than 512 MB of VRAM. Read the Help section.
If you just buy CS6, you might be able to get a refund, but Adobe sells more software CS5. Is it possible to upgrade your computer to make it compatible? Here are the system requirements for photoshop:
System requirements | Photoshop
Guinot
-
That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?
A
Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please
▹ System Preferences network ▹
If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option
Configure IPv4
If the selection in this menu is
Using DHCP
Click on the button
Renew the DHCP lease
Test.
Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.
B
Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:
- Change the selection in menu using DHCP.
- Change the address assigned manually to one that is not used by another device.
- Change the address of the other device.
Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.
If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.
C
According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.
-
My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well
If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.
Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer. The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:
Click file > printer setup > for reports/charts
In the window that opens, select your new printer using the drop-down list. You should keep the default margins and fonts. Click OK and you should be good to go. -
Users on the network cannot use the files after upgrade to Windows 10
When I switch to win 10 people on the network cannot use the files on my computer
Hello
Thanks for posting your query on the Microsoft Community.
With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.
I would be grateful if you could help me with more information to better understand the problem and a solution:
1 is this computer connected to a network domain or home?
2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?
In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:
Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.
Maybe you are looking for
-
Cannot start exe in the execution engine
Hello, I know that there is a thread on this problem, but it did not help me, so I start a new thread. Link Here is my problem: The message from the MessageBox is: in German: "Das ist nicht ausfuhrbar VI. Zur Behebung der Fehler ist das LabView Full
-
Hello Is it possible to set up a Vista account which can only download "microsoft updates" (that is, no other non-microsoft files can be downloaded or installed)? I know that you can create a 'guest account ' with essentially the rights of internet b
-
Could not be connected to the internet. My connection says "local only".
Please help says local wifi only Hi I got a gateway instead of home now I can't connect it says local only I tried to remove and set it up again, but it still connects how can I change to please the House
-
I tried to update/fix windows Vista net Framework
-
Dear, I created a list of access-pre approval for cisco ise 1.4, depending on the Switch Configuration required to Support Cisco ISE 2.0 functions, properly profiled Cisco IP phone and download a good list of permit ip access IE, but when I make a PS