PCHNotify.exe error code

Similar Questions

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Userinit.exe error code - app.

  Userinit.exe - application error when I try to start up until I do I just reinstalled xp and all packs is 1-3 and now I can't even get in the log in help.

  Hello

  · You receive an error with the error code?

  · What is the number and the model of the computer?

  This problem occurs if the Userinit key in the Windows registry has been changed or if there are incorrect shell registry settings.

  Try the steps listed below and check if it helps:

  Important: the instructions below are steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. press CTRL + ALT + DELETE, and then click Manager tasks.

  b. on the file menu, click New task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  f. in the right pane, double-click Shell.

  g. in the value data box, type Explorer.exe, and then click OK.

  h. in the right pane, double-click Userinit.

  i. in the value data box, type % windir%\system32\userinit.exe, and then click OK.

  Note the placeholder % windir % represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.

  j. If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  k. exit from the registry editor.

  a. restart the computer.

• PCHNotify.exe error at startup

  When I start Windows, a message appears saying "PCHNotify.exe has encountered a problem and needs to close.  We are sorry for the inconvenience. "Nobody knows why this is happening or how to fix it?

  If you Google "PCHNotify.exe" you will see results relating to this error.  Looks like it has to do with the HP help and Support software.

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you

• ntkranlmp.exe error code 7 at startup in WinXP

  Download the message title to start once the system crashed.  Windows XP SP3.

  KB has suggested swapping of RAM but no joy.  Installed a new 320 GB HD, still no joy but get the same error.

  What should do?

  Dave

  Two points

  1 re: the problem with error ntkmlmp.exe 7 original.  Never really had an answer, but I find this file on another computer (i386/ntkmlmp.ex_) - extracted the exe file and replaced the one on the floppy.  That's it - must have been corrupted.

  2. still not be able to start my new HD, but I'll post that as a separate issue.  Didn't really "Solve" it, but I'm going to mark this way just to close.

  THX all

  D

• Error code: C:\WINDOWS\system32\rundll32.exe__HELPP

  Everytime I open anything, he asks what program I want to open with. C:\WINDOWS\system32\rundll32.exe error code. What the devil do? I will not let me download any programs at all or open anything. As if I click on internet explore, a small screen comes up saying what program you want to open with? Why he cant just open programs more...

  Re: Request for Rundll32.exe not found?

  Click Start, run. Type the command and press ENTER. Type notepad, and then press ENTER.
  Notepad opens. Copy the text below

  Windows Registry Editor Version 5.00
  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"

  Save as fix.reg to your desktop (remember to select Save as file type: all files in Notepad.)
  Double click fix.reg and click YES to confirm.
  Restart your computer.

• Error code: 1602

  I use Win7 professional edition, acrpbat reader downloaded a update but after I click on install I got an error message error code: 1602, I tried to find a solution, but there is no solutions.

  Thank you

  Arturo.

  [2010-06-13 15:27:08] GetFileVersion(): C:\Program Files\Fichiers Files\Adobe\ARM\1.0\AdobeARM.exe
  [2010-06-13 15:27:08]    File version: 1.0
  [2010-06-13 15:27:08]    Build number: 5
  [2010-06-13 15:27:08]    Revision number: 0

  Your version of AdobeARM.exe is 1.0.5.0. Latest version is 1.1.7.0

  [2010-06-13 15:33:46] Can't access the URL: http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
  [2010-06-13 15:33:46]    Error code: 0x2A

  Probably, you won't find all the files in C:\ProgramData\Adobe\Reader\9.2\ARM\ARM Update\ that you failed to connect to the download URL. Try to cut and paste the URL in your browser to determine if you can actually reach the download page.

  [2010-06-13 15:35:11] Command line: C:\ProgramData\Adobe\Reader\9.2\ARM\ARM Update\ReaderUpdater.exe C:\ProgramData\Adobe\Reader\9.2\ARM\ARM Update\ReaderUpdater.exe
  [2010-06-13 15:35:11] ShellExecute failed in RelaunchARM.
  [2010-06-13 15:35:11]    Error code: 0 x 2

  Verify that the file above is actually (ReaderUpdater.exe) error Code: 0 x 2 is "the system cannot find the file specified."

  [2010-06-13 15:35:42] C:\ProgramData\Adobe\Reader\9.2\ARM\ARM.msi
  [2010-06-13 15:35:42]    GetLastError(): 0 x 5 - access denied.

  [2010-06-13 15:35:42] C:\ProgramData\Adobe\Reader\9.2\ARM\
  [2010-06-13 15:35:42]    GetLastError(): 0 x 5 - access denied.

  AdobeARM try to update itself and is not able to. Check that the ARM.msi is present and accessible

  One possible solution is to download and install the updates or manually if you only use the drive, try to uninstall and install a freshly downloaded version.

• How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?

  How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?  The heading reads as follows: of "http://Mac support1. com ".  I can't remove it from Safari.  It is also IMMEDIATELY said 'call APPLE to 1-844-335-2242 '.  I asked that this number.  Any help would be greatly appreciated.

  Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.

  (138334)

• error code 1 occurs with the construction of the .exe (problem VI) attached

  The problem that I have been with a particular project was published several times by others.  I read through many threads related to this (or rather related to it).  I tried some things but not all.  I finally started turning off sections of my code to see if the error disappeared.  I have followed the attached VI.  The error code is also attached.  Can someone analyze this VI and see what might be the problem?  It uses .NET objects, so I don't know exactly what the compiler is looking for.  I would point out that this isn't my VI, but the one I copied from the forum here.  As far as the e-mail, the VI works very well in development mode, but obviously I desire a standalone application.

  Also note that I have created a new project and dropped this VI on the first level VI and he built a .exe very well, which makes no sense to me. Maybe someone can shed some light on this issue.  When I tried to return to the initial project, it doesn't have the build.  If you have disabled all instances of this VI in my project (using a diagram to disable), generates the project without an error.  Thanks in advance for your help.

  Reese

  Well, I found a solution, but I still don't know why the original VI would not build in my application.  I just created a new VI copied each code section of the original, little by little, build and then copy some more until all has been copied to.  It built without error every time.  It's a head scratcher, but the only thing I can think is, given the original VI was not my code, there may be a current compatibility issue.  But even once, he worked in a new project, so I'm not sure.  The lesson that I learned from this (and I know better), is not to wait until the end of your project in order to perform a build.  Lesson learned!

• During the game Dragon Age: error code 0xc0000006 autorun.exe application error, click ok to finish

  Former title: error code (0xc0000006)

  Every time I try to play dragon age or try to open my registry fixing software error that happens with the autorun.exe application failure code click ok to finish I really want to play my game and do a scan but I'm unable to do so.  I tried to fix it by l ' completely off I tried to start the bare minimum on start up and I even uninstalled most of the programs that I put on the computer but they still does not work properly. Now my usual game even now install from the disc.  I scanned for viruses and malware, so I know that these two things are not the issue.  Please help me I don't know what else to try to solve the problem that I encounter.

  Thank you for your time.

  Hello
   
   
  1. What registry fixing software do you use?
  
  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 0x80004005 when running DVPSetup.exe

  I am running Win XP Home Edition 32 bit sp3 I have problems with my audio DVPSetup.exe tells me that the error code is 0x80004005

  OT: Error Code is 0x80004005

  Hello

  1. are you referring to DPVSetup.exe?
  2. don't you make changes to the computer before the show?

  If you are referring to DPV.exe, I suggest you try the steps from the following link:

  Windows cannot execute DPVSetup.exe error message.
  http://support.Microsoft.com/kb/555574

  Error message when you click 'Test of voice' in Windows XP: "Windows cannot execute DPVSetup.exe, use Add/Remove Programs Control Panel to install."
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;282882

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue.

  original title: I get an error code 32768

  File \i38\system32\ntkrnlmp.exe could not be loaded.  The error code is 32 768.  Implementation cannot continue.  How can I fix?

  Hello

  · What is the number and the model of the computer?

  · Which edition of Windows you install?

  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729