PCHNotify.exe error at startup

Similar Questions

• PCHNotify.exe error code

  When I start windows I get a window with the error message "pchnotify.exe has encountered a problem and needs to close.  We are sorry for the inconvenience. "I click ok and it goes away. But how do I get rid of this error window that occurs whenever I use my PC?

  Thank you, Gerry.  I knew that had to do the updates from HP, he was unable to dig pretty deep to get rid of him.  Couldn't have done it without you.

• Registry DWM.exe error at startup

  I get a registry error message whenever I start my desktop computer.

  The error message is: 'cannot load or launch 'C:\Users\admin\AppData\Local\Temp\dwm.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry. »

  This problem started after I ran SuperAntiSpyware. I tried to use CCleaner and Advanced System Care programs to fix this registry, but they did not work.

  How can I solve this error?

  I want to be careful to make changes to the registry.

  My PC is an HP m8120n under Windows Vista Home Premium desktop.

  Solutions:

  1. upgrade the graphics card drivers
  2 repair the registry
  3 run the 'Desktop Service Manager' Service
  4 disable the DWM. Boot to the EXE file entry
  5. run some commands
  6 analyse the system files for Corruption
  7 restore the system to a previous state

  Update graphics card drivers

  To correct this error, try upgrading your graphics card. Visit the manufacturer's Web site and download the appropriate compatible drivers for your computer.

  Or otherwise,

  1. click on start.
  2. type device manager in the start search box.
  3. press ENTER.
  4 expand your computer name, then the graphics card.
  5. right click and select the update option.

  Repair the registry

  Repair the registry by using a good registry cleaner software.

  Run the 'Desktop Service Manager' Service

  DWM. EXE error may occur if the Desktop Manager Service does not work. Start using Services Manager this service as shown below:

  1. download System Utilities software.
  2. click on the Service Manager tab.
  3. Select the desktop Service Manager service.
  4. click on the Start button.

  Disable the boot file entry

  In case your antivirus program deleted a virus infected, but have not deleted the corresponding Startup registry keys, this error can occur. To resolve this issue, disable this entry.

  1. click on start.
  2. type MsConfig and press ENTER.
  3 click the Startup tab and uncheck the entry with the file.
  4. click on apply. Ok.

  Run some commands

  Execution of orders supplied with the command prompt can fix DWM. EXE error. Follow these steps:

  1. click on start.
  2. type command prompt in the search box.
  3. press ENTER.
  4. Enter the following commands:
  CD %windir%\system32
  WScript slmgr.vbs - rearm
  5 restart the computer after the end.

  Scan the system for Corruption files

  DWM. EXE error may occur when the DWM. EXE system files is damaged. Replace this file with the original version can fix the error.

  1. Insert the Microsoft Windows installation disc.
  2. click on start | Run.
  3. type SFC/scannow, and then press ENTER.
  4. follow the directions in the wizard.

  Restore the system to a previous state

  By using the system restore, restore all changes made to your system to a previous state. Here are the steps to fix the DWM. EXE Error:

  1. click on start.
  2 type system restore in the search box.
  3. press ENTER.
  4. follow the instructions of the wizard your own.

• Rundll32.exe error at startup.

  The rundll32.exe path does not exist or not a directory.  This is the error message box that I get at the end of the boot.  I click ok and it goes away.  I ran an avast anti virus scan startup and also used a registry cleaner and can't get rid of this message.  Someone at - it ideas?

  Bobbynic,
  Thanks for posting on the Microsoft answers Forum.  This article gives instructions on how to correct the problem you are experiencing. http://support.Microsoft.com/kb/812340 once you have had the time to try it then let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 4707455.exe error at startup in windows 7

  When I start windows 7 Home Edition I get error 4707455.exe

  What could I do to remove it?

  Press the windows key and R

  in the type runbox msconfig and press enter

  Go to the Startup tab and look for 4707455.exe, then turn it off...

• Satellite A300 - CEC_MAIN. EXE error at startup

  Hello, I have a Toshiba Satellite A300 network and when I run Windows Vista and the error message is displayed. This error is cec_main.exe.

  I have remove the camera assistant software and restart the computer, restart when Windows the message not to apears. I have install the camera assistant software, and this error again.

  Does anyone have the solution?

  Hello

  The CEC_MAIN. EXE application belongs to the software of the camera, and if you have already tried to reinstall, you should check your firewall and security software.
  I think that your security software is blocking this application in order to check this!

  If it doesn't work remove the software and reboot the laptop. Use CCleaner to clean the system and reboot once again. After that, install the latest software for the Toshiba page.

  Welcome them

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

• F2180 errors at startup as follows - hpqst08.exe and HP CUE status root has stopped working

  I have a HP Deskjet F2180 all-in-One Printer Scanner Copier and is connected to a 32 bit Windows Vista computer.

  My F2180 now allows two error messages at startup as follows:-"hpqst08.exe" and then "HP CUE status root has stopped working."

  hpqst08.exe error reads "the application is not properly initialize (0xc0150004).» Click OK to close the application. »

  HP CUE status root has stopped working reads 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I've uninstalled and reinstalled the software, but the error still occurs.  Seems to have happened after an update of Windows Vista (this machine is rarely connected to the Net).

  Any ideas to fix it please?

  Click Start
  In the search window, type services.msc
  Click on the above result that says services (you may need to right click and choose Run as administrator to open)
  Look for the HP Cue (or similar)
  Make sure it is started and in auto mode (automatic not delayed or manual)

  If it is not automatic, set it to that, and then restart the computer.

  If this does not work

  Click Start
  Type msconfig in the search window
  Click on the above result
  Go to the Startup tab
  Uncheck hpqtray08 and hpqst08.exe if it is in the list
  Click on apply, then OK and perform a restart

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John

• nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »

  original title: nwiz error at startup

  I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.

  I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:

  At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.

  I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.

  Thank you

  lostisfound

  Hello

  The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  Reference:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  How to solve the problems of hardware with Device Manager
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Visual c ++ runtime library error at startup. Runtime error! Program: C:\Windows\Explorer.exe

  Original title: Microsoft Visual c ++ runtime library error to star up

  Microsoft Visual c ++ runtime library error at startup

  Runtime error!
  Program: C:\Windows\Explorer.exe
  I can't solve this problem.
  I tried these solutions:
  I deleted all versions of Microsoft Visual c ++ s old and re-installed Microsoft Visual c ++ 2010 and all other microsoft automatic updates
  AutoFix used to define Internet Explore to the initial state (deleted programs side)
  Clean boot startup: error always happens after I uncheched all stars including Microsoft services services
  Start in safe mode: error persists
  Done a full virus scans (avira and f-secure online)
  I tried to restore Windows but there is error and can't do.

  Hello

  This error message or when you tried to restore Windows?

  I suggest you try to create a new user account and check if it helps.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, here is fix a corrupted user account:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Satellite U300-13V flashcards tcrdmain.exe - error R6025 Pure function

  I just bought a Satellite U300-13V, very happy with it so far except one small complaint. When you first start up, it has produced the following message is displayed:

  program files\toshiba\flashcards\tcrdmain.exe
  R6025 Pure function call

  He will then close the Flashcards program.

  Now I don't know much about laptops and I have no idea what is Flashcards - Toshiba manual gives no information whatsoever, but one thing I know is that:

  (a) receive errors at startup is not a good thing

  and

  (b) I have a kind of feature I paid for, but I'm unable to use.

  Everyone knows that before, can someone help, is anyway to contact Toshiba and get their help?

  Thanks in advance.

  Mark

  Appears to the operating system or some 3rd programs and files were confused upward.
  I recommend trying to reinstall the operating system using the Toshiba recovery image.

  The image contains, OS, Toshiba, drivers, tools and additional software.
  Especially the new facility allows all of the annoying problems.

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• winver.exe error, error code "winver.exe 0xc0000005 application error".

  Title original: winver.exe error

  I had this problem "application error 0xc0000005 winver.exe".

  someone knows how to fix this?

  Hi Helel,

  1. When you get this error message?

  2 have you made changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode and check if the problem persists or not.

  A description of the options to start in Windows XP Mode

  Step 2: If the issue is not reapper in safe mode, perform a clean boot, and then check that it helps if you can skip this method.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run the System File Checker scan and check if it helps.

  File system (CFS) Checker

• OLEPRO32. DLL error at startup

  At startup I get an error message "Application failed to start because OLEPRO32.". DLL is not found. "This is an IFRMEWRK. EXE error - unable to locate component.   Can someone tell me how to fix this error, then it will go away.  Any help is appreciated.  I run XP Professional if that helps anything.

  The file ifrmewrk.exe is would have been associated with certain Intel wireless cards.  I don't have such a thing here so I can't reproduce the error you see.  I think you'd want to work properly.

  If your olepro32.dll file is missing, you should try to understand why he is absent.  Since this is a critical file on the XP system, should be an additional effort so that it can be absent.  Maybe your system has some malware on it or your antivirus/antimalware unspecified program examined the file a threat and quarantined (actually deleted) file.

  If the forums MS Answers would invite a little information system, when a new question is asked, things would be of course much smoother around here.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called olepro32 when the name of the file should really be called olepro32.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.