PCI Ethernet card does no not after PCI slot

I have a card to PCI Ethernet D-Link DFE-520TX in one of the PCI slots and connected to a Linksys router.

I wanted to install a new sound card so I changed the Ethernet card to an adjacent PCI slot. (without uninstalling the Ethernet card)

After you install the sound card, I found that I am not able to connect to internet!

These are the observations I made:

The connection icon says "Limited or no connectivity."
When I click on icon of connection, status shows bytes sent/received something like that...
Bytes sent: 4536 Receieved: 0
The IP seems to be assigned by AutoIP.

I tried to uninstall the Ethernet card drivers and install again for the new PCI slot but no luck

Finally, I gave up and restored the adapter Ethernet to its former PCI slot... and surprise, his does not work here too!

A I miss out on something?
Any help with this would be really appreciated. Thanks in advance.

Hello

His work...

In fact the IP, DNS etc. had been configured manually.

When I removed the LAN card, all fields has scored zero, I wasn't expecting that to happen!

Thanks anyway!

Tags: Linksys Routers

Similar Questions

  • Realtek fast ethernet card does not work on laptop with Vista

    My realtek fast ethernet does not work with my windows, what can I do about it?

    I have no internet access on my laptop

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • Some keys on the keyboard does work not after the suspect virus on Tecra

    Apostrophe, delete, semicolon and the end of the keys no longer work after a suspected virus attack. I found the same problem on the net record but apparently this guy fixes his problem after stop scroll or NumLock on found him.

    This isn't the case here, but it's something with numlock - registry Watch 2 and not 0. switch to 0 but when reboot 2 times.
    Suspect has changed through the bios. I thought that I couldn't get to the bios because DEL key does not but found ESC works.
    Tried to reset the values default to the bios but then can't save and exit it in accordance with the EndKey to work.

    I was running XP at the time of the (alleged) attack and could not correct the problem so to put the computer OEM as I hoped would help - there no, same problem, so instead of installing all the software on the computer with XP I upgraded to Windows7 - charge install.

    Keys still don't work - it was a real pain first as my computer was created for ctl + alt + delete to log on and I had to do with the keyboard of the screen - XP - it showed also that numlock performed before and after windows starts.

    The reason why I suspect a virus - my wife was watching an of its tv shows on the line of the country of origin (an another toshiba laptop) and I needed to use this laptop for something else, so I asked to use mine - then we turned off laptops and the morning turned tham back on again once , the other laptop with virus protection AVG reported several hits and this one with Norton (FAMOUS and completely up-to-date) flagged nothing - once I got the screen keyboard.

    Problems with this computer were found after scanning with different antivirus.
    Anyway - I find myself with 4 keys that don't work not on my keyboard (in fact they work after I have connected to the computer for the first time, but I had to hold them in place for a long time - and then the next time I rebooted, not at all and did not since)

    Here, any help would be greatly appreciated, I'm working on this all weekend with no joy at all.

    Thanks in advance.

    Having a virus attack, the Windows files will be destroyed. Try the scan with kaspersky on Nod 32. If not help, reinstall os because it is the best solution in your case.

  • Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)

    My hard drive doesn't have the other day (western digital 320g).  He left me stranded, I installed a new HD, installed windows 7 pro costs.  Everything seems to work except for my linksys PCI slot wireless network card.  In my control panel, I have a yellow on my network controller in the properties of the material.

    All ideas, it won't let me add a driver?

    I installed windows with the card in the slot, which shouldn't matter should it?

    Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys

    Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.

    Here a link to Ralink is where you will find all the Ralink drivers.

    Here is a link where the drivers for your card.

    You will be asked to enter your name and e-mail address to access the doe to download these drivers.

    If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.

  • Option Internet PCI card does not work

    Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

    It says that my Radio power is off, even if in reality is not.

    I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

    Please can you help me.

    Thanks in advance

    Can you please tell us which model of laptop you have exactly?

  • PCI USB 3.0 Express card does not work

    Discription of the system:

    • HP Pavilion Elite HPE-520nl desktop PC
    • Processor Intel Core i7 - 2600
    • Memory 6 GB
    • Windows 7 Ultimate 64 bit
    • Service Pack 1
    • The map of USB 3.0 pci card the "HP-lable" is printed. Therefore an alaaa by HP original card.

    My HD portabale with USB3.0 interface is not recognized. Also all USB 2.0 memory sticks are NOT regonised by this card pci of USB 3.0.

    I searched on the web, this forum ect. and posible all software and drivers updated.

    Now at least there's no sign of escalmation in the Windows Device Manager.

    There are no errors in Windows and by double clicking on each and evry device a puppy window says: "device is functioning! (But when I put in a usb in the port USB3 device, nothing happens, not even a new drive appears under 'Computer'.)

    OK maybe the card is the default, so I bought at a local PC store a new one (Konig CMP-PCIE2USB3), but same problem.

    Well maybe the PCI slot is the problem... I put the card HP in the free location. But still no luck.

    Now I have 2 PCI USB 3.0 Express card in my office, but no USB 3.0 for my USB 3.0 devices connection.

    All USB 2.0 ports are working well.

    Help, please.

    I uninstall the original card and don't forget to remove the driver. Then install the Konig CMP-PCIE2USB3 and install the driver from the Web site. Don't forget to attach the molex 4 pin of your power supply.

  • Do I need a PCI Ethernet card on my Mac mini to connect to the Ethernet connection?

    I tried to set up my mac mini on my ethernet newly updated. Nothing seems to work. When I scanned the information system and click on the Ethernet cards, I received the message: this computer does not have any Ethernet PCI cards installed.

    I checked and I had the latest version 3.28.2 noted Incompatible Kernel Extension Configuration Data, which has been a problem for other people.

    Is there another way to do this work?

    I'm in IOS 10.11.1 on a Mac mini (mid-2010)

    Ethernet is built in and can not be an addition except as to adopt USB Ethernet.

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • W520 PCI - E gigabit ethernet card

    Hello

    There is a PCI-E on the side slot on the W520.

    Are there of the PCI-E gigabit ethernet cards available somewhere for this port?

    I looked around but have not found.

    Kind regards

    Eddy.

    http://www.CDW.com/shop/products/Belkin-Gigabit-Ethernet-ExpressCard/1001280.aspx?AcquirgyID=1421650...

  • X 51 R2 Ethernet does not not after update to the last W10

    So my Windows 10 upgrade works really well, but after the update (may be a coincidence) the Ethernet port no longer works.

    If I go to Device Manager there is no warning. I did the W10 check for update of the driver but there was nothing.

    I swapped autour cables with my Smart TV and he is always able to access the internet, so it is not the cable or switch.

    I booted up a Live Ubuntu disc and it has been able to access the Internet by Ethernet so I guess this isn't a hardware problem.

    I rolled back to Windows 8.1 and it still does not work, so at this point, I guess the update knocked out using some driver Ethernet the X 51.

    I do not have any third-party antivirus installed, just everything what comes with Windows 8.1/10.

    Anyone else does?

    Well duh. When I got to Windows 8.1 I don't check the Device Manager. Of course after the deactivation and reactivation of the Ethernet card it works.

    So, I guess that if someone finds this - here's how to fix your Ethernet if the W10 update knocked out the last two days.

  • Sound card does not work after upgrade to XP Pro

    I need help - Microsoft participated three times without result. After that I updated to XP pro that my SigmaTel C Major sound card does not work. Done all the usual uninstall the driver, update driver etc. No results. When I go into the properties of audio devices, midi and mixer IE driver I see a status message: active but device not started

    Any ideas on how to solve it is greatly appreciated.

    Hello

    Sorry but I have no explanation for this. I can recommend you to remove the sound card in Device Manager, then restart the unit. After reboot, the sound card must be recognized and installed properly.

    It will be interesting to know what model of laptop you have.

  • HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

    Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

    From what I see, the motherboard has a PCIe and two PCI card slots.

    Computer model is XL510AV

    Any help is appreciated.

    Hello

    The following can help:

    http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

    It has 2 brackets for standard and one for the low profile, you can swap around.

    Kind regards.

  • Card PCI Express causes conflict w/ethernet card

    When I install the card PCI/MXI express, it causes a conflict with my existing ethernt card and will not allow the CPU to register on the network.  When I remove the PCI card, the problem goes away.  Is there something I need to set up to prevent this?

    What the MXI device?  What is the model number and part (e.g., PCIe-8361 and C 195315 - 01 L)?  I've seen this behaviour before with a PCIe-8361 and to relieve this symptom I made sure a PXI system power has been connected to the MXI controller before turning off the computer.  I would be interested in hearing if this works for you.

    See you soon!

  • Ethernet network card does not show my Satellite L830 - 16H

    Hello

    Ethernet network adapter do not show my Toshiba Satellite L830 - 16H, and it can not reset it

    What can you do to restore it?

    I thank everyone

    You can try to access the BIOS (turn the unit on and press F2) and set it to default and save the changes.
    Sometimes this help

    Otherwise, it can be device LAN card problem.
    The fix can be very expensive because such port is part of the motherboard.

    I think you can try using an optional USB LAN RJ45 Ethernet adapter

  • Ethernet driver does not work on Dell Dimension 8520 after Windows XP install.

    Ethernet driver does not not on my Dell Dimension 8520. I reinstalled Windows XP and drivers, and everything works except drivers Ethernet and those. They have big yellow points to mark by them. Tried to delete and restart, but they come back and still do not work.

    I don't see anything for 8520 dimension on the Dell web site.  Windows XP for Dimension 8250 drivers are here .

  • Graphics card does not not after reinstallation of windows 7

    I just did a clean install of windows 7 and it seems that my graphics card does not work. It is not in the Device Manager and my screen will appear swollen and I can't solve this with screen resolution that I only have 2 options. I have a laptop Asus K52J with a Radeon Graphics HD637OM card. Windows 7 Home premium with service pack 1. Was working fine until I removed the original windows 7. I tried to download the Radeon drivers, but they come with a compalibility problem.

    Go here http://www.asus.com/Notebooks/Versatile_Performance/K52JE/#download select your OS, expand the section VGA. Download and install the ATI graphics driver. Most laptop video drivers from the laptop manufacturer and not the video to a chip.

    While you're there, you might as well download and install all the other drivers that are not up-to-date.

    SC Tom

Maybe you are looking for

  • How can I remove wrong email for Firefox Sync on my browser?

    Hi all I use Firefox 37 recently. I'm new to Firefox sync and made a stupid mistake. I myself registered with my email account but accidently left a character. It seems that the verification email has gone to someone who has that email address. I tri

  • a6233. SC - HD surround sound?

    Hi, I bought the a6233.sc about 7 years ago and did not have a reason to replace it since then. I added more RAM and a bunch of external hard drives. Now, I'm looking for buy a new receiver surround sound capable of HDMI and HD audio and my PC has be

  • Wear of keyboard

    But little technical, after only ten months, the keyboard letters began to wear out. What can I do?

  • matter what emulator for development?

    Hello I'm using labview in 2013 in development. I have the labview installed in the computer in which the DAQ installed maps. But I'll expand the code in the home computer to which no card installed DAQ. So is there any DAQ device emulator so I can c

  • My WIN Vista Premium PC problems.

    Your help is very appreciated. I have a computer Windows Vista Home Premium (32 bit), with problems. I tried many ways, find proposals / solutions here on your web pages, but trying the they seem to not work for my pc. For example, Windows Update doe