Do I need a PCI Ethernet card on my Mac mini to connect to the Ethernet connection?

Similar Questions

• I need to reinstall PSE9 in a new Mac. To my surprise, the MAC is not the CD player. So, I need t

  I need to reinstall PSE9 in a new Mac. To my surprise, the MAC is not the CD player. So, I need the link to download the PSE9 for Mac.

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com

• Need to put in place an old Mac Mini and restore from a backup

  I have a strange question.   My husband, who is quite old and disabled, a die of his old Mac Mini.  Well a friend gave us a 'new' old mini so he could get up and running, but I need to do two things.  One is I need to get all the programs they had on it because it's much too heavy for an old mini without intel.   I also need to keep things simple for the husband.   The second thing I have to do is restore all his tricks of the time Capsule.    The mini has the former user on that stuff and I would like to clear all that I am has it down to the setup of the wizard, I can have then take off all the data from the Capsule and put it in the mini.  Is there a way to do it?   Thank you

  PS There OS 10.5 on it.

  See:

  Use Time Machine to back up or restore your Mac - Apple Support https://support.Apple.com/en-us/HT204350

  If it has OSX 10.5 then delete insert the OS x 10.5 install disc and format the boot disk and reinstall 10.5.

• Is a PCI-6120 card in a computer with linux useful for the analog output?

  We have a PCI-6120, and we want to use in a computer with linux OS, to the analog inputs and analog outputs.  I have downloaded the driver NOR-DAQmx Base 3.2 for linux, and in the file README.txt only analog input is mentioned for this Council. It is possible to use this card PCI-6120 in linux, with output and analog input computer?

  Best regards

  Hey, Gallas,.

  This line in the README file simply refers to the PCI-6120 by its more popular, analog input subsystem (given that it is a simultaneous sampling device, the AI is the most commonly used subsystem). But NEITHER-DAQmx for Linux does not have the same limitations NOR-DAQmx base has. In other words, it supports the ability of analog output on the PCI-6120.

  Kind regards

  Sam

• need help with loading Flash on Apple Mac Mini

  Lost my username, password & I am unable to load flash version 8 or better, totally computer illiterate & need HELP!

  Hi Michael,

  Please see what userid & password I need to install Flash Player?.

  --

  Maria

• HP ProLiant DL360 G6: HP ProLiant DL360 G6, recommendations of Pci-e card

  Hi, I like to try this server friendly hp (with WIN7) for music production and need some Pci-e cards. Need to FireWire (half Pci-e slot) and connection for 2 monitor machine... maybe better graphics (size Pci - e) card with the digital (Dvi or something like that). I'm not sure that I can get 2 monitor to this DL360 G6 without the better graphics card?

  Well, I can buy some FireWire or do I HP stuff, ideas? FireWire 400 is okay, enough for my project

  And what Pci-e-type graphics card should work in this machine? I don't need a lot of power, only 2 monitor with 1920 x 1080 resolution.

  -Aclac

  And finally... I got card (FireWire 1394 IEEE 1394 VIA VT6315) in trials. Now Win7 running with 2 monitor and my audio interface (RME ff800) has connected through this new card. I have tested only 8 hours, but everything seems to be ok. Maybe, maybe soon I turn my studio with this material huge serverbased

• HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

  Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

  From what I see, the motherboard has a PCIe and two PCI card slots.

  Computer model is XL510AV

  Any help is appreciated.

  Hello

  The following can help:

  http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

  It has 2 brackets for standard and one for the low profile, you can swap around.

  Kind regards.

• Z620: need help with the difference ("boot") of ssd pci-e cards and pci-e (BIOS) nand

  Hello

  I intend to buy a card pci-express ssd for access/faster transfer, and I read the topics concerning the problem of booting from that ssd, but still did not understand much to be honest.

  what I noticed, is that HP620 should work with older (like turbodrive Z), but not the based NAND, new Z turbodrive G2,.

  or only with a few tricks.

  now to my question.

  Some people say, this new nand ssd pci - e cards require a boot uefi bios and a few options, I do not understand.

  as I have a regular bios (not), is it true that you cannot boot from these new ssd expansion slot, or are there tricks like the passage to the AHCI and a few other options in the bios?

  If this is not possible, I'd be limited to regular use SATA ssd, limited to 500 MB/s of bandwidth, right?

  Thanks for any help

  Chris

  Found this info on the web;

  "There are actually two versions of the player. The original version uses the familiar AHCI Protocol, while a new variant is the NVM Express standard. The model of the AHCI is compatible with a wide range of motherboards and available among a wider selection of suppliers. »

  The version of NVMe is also supposed to be faster, but in reality, it is not much of a difference.

  

  I think that you need a motherboard with a socket m2 is to see a real difference in speed compared to the old version of AHCI.

  I understand that it is only the most recent Zx40 HP series range that supports readers NVMe but not sure 100%. It would certainly be a challenge trying to get one to work in a series of Zx20 HZ.

  My SM951 in CrystalDiskMark 5;

  

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• PCI Ethernet card does no not after PCI slot

  I have a card to PCI Ethernet D-Link DFE-520TX in one of the PCI slots and connected to a Linksys router.

  I wanted to install a new sound card so I changed the Ethernet card to an adjacent PCI slot. (without uninstalling the Ethernet card)

  After you install the sound card, I found that I am not able to connect to internet!

  These are the observations I made:

  The connection icon says "Limited or no connectivity."
  When I click on icon of connection, status shows bytes sent/received something like that...
  Bytes sent: 4536 Receieved: 0
  The IP seems to be assigned by AutoIP.

  I tried to uninstall the Ethernet card drivers and install again for the new PCI slot but no luck

  Finally, I gave up and restored the adapter Ethernet to its former PCI slot... and surprise, his does not work here too!

  A I miss out on something?
  Any help with this would be really appreciated. Thanks in advance.

  Hello

  His work...

  In fact the IP, DNS etc. had been configured manually.

  When I removed the LAN card, all fields has scored zero, I wasn't expecting that to happen!

  Thanks anyway!

• Need recommendation: A better card from PCI RAID to ESXi 3.5

  I'm trying to install VMWare ESXi 3.5 on an old Dell Poweredge 750 server, which has two available PCI slots.  I know that the integrated SATA does not work and I need to have 2 x 2 TB disks installed on it, but realize that there is a maximum size of 2 TB disk volumes, so I was going to make a RAID 1 configuration with a slightly smaller total capacity of 2 TB under the limit of ESXi.

  I tried with a map of 3Ware 8006, but although it recognizes my drives very well, ESXi doesn't like it (complains there is no disk to install to).  I then tried a SIL chipset cheap raid card that ESXi liked ok, but does not start at the start of.  I used the Adaptec PCI RAID cards before with great success, but I don't know if the old PCI cards to support drives of 2 TB on them.

  Does anyone have a recommendation for a PCI (not PCI-e) decent, inexpensive that will support ESXi 3.5 and SATA 2 x 2 TB disks?

  Thank you

  Myles

  Adaptec 2610 is PCI - X, which can be adapted to your PCI slot, but you must see if you have the space for the unused portion of the card PCI (X) to clear the components of the motherboard. PCI will be limited to 1.5 GB, so your big SATA drives will be slow. Unless you have the battery backup cache writing that read/write performance will be poor.

  You can view the HCL http://vmware.com/go/hcl

• PCI ethernet controller

  just finished installing windows on my pavilion 750n millineum. I'm looking for the driver to access the internet. Ethernet PCI controller is what Miss me. can someone help me please, I would appreciate. Thank you and God bless you

  Your question is a bit confusing. You say you need PCI Ethernet, but then the dialup modem driver download. Now, you mention that you use an adapter of Netopia of Bell South for internet. You will need to contact Bellsouth for Netopia drivers.

  Other drivers for your computer which can be useful >

  Intel Chipset:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=8178&lang=eng

  Intel network card:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=9256&lang=eng

  NVIDIA graphics card:

  http://www.nvidia.com/object/win9x_71.84.html

  Choose the Codecs AC97, contract, then download the executable:

  http://www.Realtek.com.tw/downloads/

• What mini PCI WLAN card can be used on Equium A60 - 157?

  Hi, im trying to buy a wireless mini LAN card pci for my toshiba Equium A60-157... do not know what an I need or I can use? Thanks Carl

  Hi Carl

  According to the specs of your device is not ready WLAN. This means that you can not switch on the unit with the mini PCI WLAN card. Only solution is the card PCMCIA or USB WLAN stick.

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Ethernet vanished - Mac Mini card

  Hello.

  This morning when I turned on my Mac Mini (running 10.11.2 at this time), I had no network connectivity. After the passage of cables, test the router with other devices, I determined that the problem was definitely with the Mac. The preferences panel network informed me that the computer was not installed PCI Ethernet card. I installed the update for 10.11.3, and which naturally does not solve my problem. After talking to a friend, he suggested I have test the Starter card of the machine with a boot external drive. I don't have one, so I wrapped it and went to his house with it. The test proved the card works: when its external drive (10.11.1) starting the card ethernet works fine. So I brought it home and tried to DL a clean version of the operating system, but for some reason any App Store will not be re - download. I found some instructions to remove the file from the network interface.plist and start again - didn't solve it, and now it gives me the option to configure a new ethernet connection, I guess because he thinks, he has no one. And if the wifi gives me connectivity, this is not satisfactory.

  Any suggestions?

  Thank you.

  I found a patch for this http://swcdn.apple.com/content/downl TEEN/47/55/031-52551/djk479pucjbs7r2ln9u3n0573nt3 1ifb45/AppleKextExcludeList_10_11.pkg

  This solved it for me. I hope this helps others with the same question. You can read this as well: https://www.reddit.com/r/apple/comments/47tfos/warning_software_update_03151913 _ breaks_ethernet /