PCL error on dell 3000 printer, how to fix

Similar Questions

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• calendar of the prints beyond the dates requested printing - how to fix this?

  calendar of the prints beyond the dates requested printing - how to fix this?  Because that's the impression beyond the date of my request she also shows not all of my regular appointments for each date.

  Hi Sherrie,

  Thanks for posting your question in the Microsoft Community.

  Of the information, you are facing problems to print issues with the calendar.

  It would be useful that you could answer this question to help you further.

  1. what calendar you want to print?

  2. This occurs when you print by using a calendar of specific application?

  3. are you able to print other documents without any problems?

  4. have you made a recent software or hardware changes to the system?

  Please provide us with more information on the issue, so that we can help you solve the problem.

  Suggestions for a question on the help forums

  If you need further assistance, please answer and we will be happy to help you.

• When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  Hi Giovannil27088677,

  If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%

• Updated 13 13.1 PS elements fails. It downloads then U44M1P7 error message is displayed. How to fix?

  Updated 13 13.1 PS elements fails. It downloads then U44M1P7 error message is displayed. How to fix?

  Thank you for your help. The problem has been resolved by Adobe online assistance.

• 024-965 error on Dell 3100cn printer

  I have an old Dell 3100cn printer and get this error and cannot delete it.  After much research, it seems that when I push the tray in the printer, the paper is not be raised by the springs in the tray to trigger the sensor.  The two pins plastic in the back are there, but for some reason, they don't sting with the Board to release the springs.

  What I have to buy a new Board or is there something else I'm missing?

  Thank you

  I just had this problem where the printer gave me an error "loading paper". I finally took a real look at it today. I noticed 2 pieces of plastic at the bottom under the paper tray that was loose. I have summarized that the paper was not lifting t0 rolls and that these small pieces of plastic has played a role. The status bar was going up when I tested but noticed that the status bar should contract charge. These pieces of plastic cause the tray lift once loaded. I noticed one of my pieces plastic seems to have a broken offshore leg, but I was able to put it in where it would trigger the tray to lift the paper in rolls. I'll just be careful when loading paper to dislodge the not not this in the future.

  I live my printer n have had for 15 years or more. He worked like a champ and was disappointed when I had this problem... was a pretty easy fix.

  I go by Dell again but I am surprised that this forum is not controlled by Dell technical support to help provide answers...

• Dell 1720dn printer, how do I reset to DHCP for IP fixed

  I have a Dell 1720dn printer connected as a network suspended my modem/router printer and with a fixed IP address.

  I changed just my ISP and don't have a fixed IP and therefore need to change my printer to enable DHCP.

  I see no way to do another that uninstalling and reinstalling the printer... or am I missing something?

  Thank you for any halp

  If you always access the printer web server you can change the DHCP IP address in network settings. Otherwise I would try a factory reset the printer and it should return to the DHCP:

  Turn the printer off

  Open the access cover to the printer

  While you press and hold the continue and cancel re - turn on the printer

  NOTE: the lights will be put a few times

  After the error light turns on and stays on

  Release the continue and Cancel buttons

  Close the access cover

• Registry errors. System hangs. How to fix registry errors?

  How to fix registry errors? The registry errors affect the performance of the pc?
  My windows crashes often. Bases of installed microsoft security update.

  Hello

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes, and displays the information about all crashes in one table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  This utility can be used to check the event log for errors other than a BSOD, many crash
  Events will write to the event log.

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second
  or so from the time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that appears
  details of all application crashes occurred in your system. The information breaks down
  is extracted from the .wer files created by the component of Windows Error Reporting (WER)
  the operating system every time that an accident occurred. AppCrashView also allows for the
  easily check the list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ==================================================================

  These methods can help correct most of the problems of crash.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• 'Test latency error' what it means and how to fix it.

  I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?

  Was it speedtest.net?

  If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):

  «"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »

  If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).

• error message "uninitialized msoc.dll" how to fix it?

  "msoc.dll not initialized" how to fix it?

  Hi jimTE,

  Do you check and clean boot if the problem persists?

  Method 1
  SFC scanner.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2
  Perform the system restore to the date it was working fine.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• What is the cod of error 0 x 80240036? How to fix?

  After the system recovery try update error cod happen has windows.

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  Ref: http://taurarian.mvps.org/WU_XP/0x80240036_0x8024400A.html

• Update "KB2416447" will download, but not install. Error code is 0x66A. How to fix this?

  Download has been a success, install gets 1/2 way & fails, with error code 0x66A. I can't find this error code in the lists.  Finally, subsequent updates were installed successfully.

  Try a "clean boot": how to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See also if this post is useful: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/xp-cant-install-kb2416447/e4be0b33-d909-417b-b3f8-4f8084d02387

  J W Stuart: http://www.pagestart.com

• I can't delete a program error 80070043. Anyone know how to fix / remove?

  My DAUGHTER INSTALLED AVIRA AND I CANNOT ACCESS ADMIN TO REMOVE THIS PROGRAM FROM CONTROL OR EVEN MAKE the updates of WINDOWS DEFENDER GOLD. GET THE ERROR 80070043 CODE. Help, please.

  Hello

  Here is information on how to do a manual removal of Avira.

  It includes the Avira registry cleaner to remove all the keys that installed Avira.

  I've never used and we normally do not recommmend using Registry Cleaner.

  http://www.Avira.com/en/support-for-home-Knowledgebase-detail/kbid/902

  I suggest that you ask in the Avira Forums for their direct information on how to do it.

  http://Forum.Avira.com/WBB/index.php?page=index

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  For your problem of Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Since the installation of service pack 1 to install pack antivrus on my laptop when I download updates windows I get error codes (80072EE2) and (8024402C) how to fix this?

  Since I installed the service pack 1 of windows on my laptop to install antivirus 2012 pack that I can no longer download updates windows. How can I solve this problem?

  I get error codes 80071EFE.  80072EE2. 80200010.

  Hello

  Perform the steps in the article mentioned below and check if the problem persists.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Hope this information helps.