PDF Axial shading Pattern ranging from opacity

Similar Questions

• problem with Axial shading

  Hello

  I implement axial shading for my pdf viewer. I use the attached file to test and it looks like in Acrobat Reader. The file specifies axial shading with Coords = [0 0 1 0]. It is a horizontal, so my implementation produces a result where the colors vary horizontally. That sounds right to me - according to the specification:

  "Type 2 shades (axial) define a mix of color which varies along a linear axis between two end points and continues indefinitely perpendicular to this axis."

  However, the colours seem to vary vertically when the file is opened in Acrobat Reader. I have ideas of what Miss me.

  I guess it has to do with the CTM used in the content stream:

  q 0 439, 37 - 439.37 0 467.717 - 1, 502140 cm /Sh1 sh Q

  Leonard

• .pdf, download files and disappear from the screen in a second

  All .pdf files, download and disappear from the screen in a second (white screen), but can be saved on the HARD drive! MS IE doesn't have such a problem,
  problem with Firefox 7 & 8

  Try to install the latest version of Adobe Reader to see if it works instead of the plugin "Adobe Acrobat plugin Version 7.00 for Netscape" available to you.

  • https://support.Mozilla.com/kb/using+the+Adobe+Reader+plugin+with+Firefox
  • http://get.Adobe.com/reader/otherversions/

• Measurement of voltage USB 6008 ranging from 1mV

  Hi, I'm doing a supply at an angle for an amplifier using the USB-6008. The ranges I look are - 0.5 to 0.5 V and 0.5 to 2.5 V. To generate negative tensions, I use the + 2, 5V for a reading of differential voltage output as a 'ground '. Voltage measures have a delay that varies with the voltage, given this by drawing these variations and set the output to data acquisition there is still a 'noise' of +/-1 mv so that it is clear from this parcel of tension against the sample number:

  

  It seems that at some point the values are being rounded up to the nearest millivolt. I need to get to a resolution of 0.5 mV for my device, it will be possible with the USB-6008?

  The AO USB-600 x has a range from 0 to + 5 V and the 12-bit resolution. 5/4096 = 1.22 mV. Absolute precision is 7 mV typical and 36.4 mV maximum full scale.  The noise of the AO is not specified.

  If you measure the results with THE USB-6008, you have at least 0.5 mV, similar resolution system noise and absolute accuracy of 2.5 mV or more.

  It's probably as good as you will get with the box USB-6008.

  Lynn

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in sequence automatically, but number 10

  This is my first time using this forum. I hope that my question made its appearance and that this space is to respond to the answers possible, but just in case, here's my question again:

  On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in the sequence automatically, but the number 10 appears under the number 1 instead of below the number 9. I googled the problem, do not see addressed. I called Microsoft, and they said it's a matter of Adobe. If anyone can help I would be grateful.

  Thank you.

  Not an Adobe issue at all. If you want your files to a single digit (1-9) to appear before the 10, you must add a zero at the beginning.

  01

  02

  03

  04

  05

  06

  07

  08

  09

  10

• downloaded Adobe Reader 11.0.16 but can't open the pdf - message "because it comes from a developer that is unidentified.

  Have imac with Yosemite 10.10.4 and recently updated Adobe Reader for the 11.0.16. I need to open an application with A.R. form to enter information, but after changing my default to Preview for this file, I get the message "pdf can not be opened because it comes from an unidentified developer". I don't know anything about changing security settings, which is also mentioned, and do not know if the offender is A.R. or pdf file. Is the file to open from the UK Lotttery Heritage Fund, an organization of very broad reputation, who advised me to use A.R. When I told them that when I had used an excerpt info boxes would not extend as it should, when the text is entered, nor. I don't think it will be a rare problem and would be very grateful for advice because it is rather urgent.

  Thank you, Arnold

  Here's another thread on the same topic, with a solution: = the developer application pdf unidentified?

• How to edit a pdf file which is drawn from the paper version?

  

  After you remove the paras, it looks like this. IT IS A DOCUMENT FROM A HARD COPY. PLS HELP HOW TO MAKE OWN

  Hello.

  You should see this tutorial: Edit scanned PDF | Adobe Acrobat DC tutorials

• PDF forms increasing in size from 10 to 100 x no reason apparent

  Hello.  I'm doing a series of forms in Acrobat Pro 11

  These are very basic documents, they contain a few lines of text and form fields.  Think of them as a form of standard fee as your W-2, that's how they are designed.  And they are all very similar to each other.

  Eventually most of these forms, in that I have created about 50-80KB file size, but some of them ended up being up to 6 MB in size, and I can't for the life of understand me why.  There is nothing else to their topic.  They are all optimized for displaying web pages, they use very minimal fonts (all the Arial Regular/bold/italic) and most are embedded subsets and there is no graphics in any of them.  If I register as a "small size pdf", it goes from about 5.8 MB to 5.2 MB.  I looked around optimization tips everything I could find.  6MB is not 'big' these days, but I don't see why some of them are 100 x larger than the others when they are almost identical in structure.

  Is there a way I can inspect the inner workings of these documents to know exactly who it is who takes so much space?

  It could very well be due to your use of Arial, assuming that you use in fact instead of Helvetica. Even if you specify Helvetica, Acrobat and Reader override a private version of Arial in any case, so what you do by specifying that arial adds unnecessarily space since the entire police is incorporated, sometimes several times. The problem is you can't go back and set the fields to use Helvetica and see the reduction in file size that you can imagine. This is due to what I consider to be a bug that I hope will be corrected. If you start with a fresh PDF, but you can copy fields abandoned to the new if you change first them to Helvetica. Or if you know how to hack into the PDF file, you can retrieve after you change the fields to Helvetica.

• How to locate the pdf files in your adobe from your phone account

  I saved a pdf file from my windows phone on my adobe account but I can't find it when I connect to my account adobe on the computer

  If the PDF file has landed in your "Files" of your acrobat.com account segment, then he will be present when connecting to the account by another device or another computer.

  Be well...

• How can I download PDF export yet once erased from my computer?

  I paid for the PDF Export, and it has disappeared from my computer. How can I download it again?

  I need to download the software Adobe export in PDF format.  I currently have a subscription, but when I had to restore all the files from my computer, ADOBE has also been deleted.

• PDF form - load and save from/to XML

  Hello

  I am looking for a solution fill and read the value of the fields of a PDF form. I work with Microsoft Framework 2.0 and c# for a desktop application.

  At the moment I use a FDF file to fill the fields PDF and iTextSharp to collated fields values once the PDF file is saved. But it does not work with some PDF that are bind to an XML data source. The idea is to drop the FDF solution and try to use XML instead.

  So, I have a PDF form (myPdf.pdf) with fields bound to a source of XML (XSD schema file myPdf.xsd).

  I have a data XML (myPdf.xml) file in the same directory as the PDF file.

  With LiveCycle and JavaScript is it possible to:

  • Load the XML data file and fill out PDF when I open the PDF file?
  • Export the value of the fields in the XML file when you close or save the PDF file?

  If not possible with LiveCycle and JavaScript, you know another solution?

  I thought to put a button "Send by HTTP" and use a listener on localhost to get the data, but I need to listen on a particular port and it is unlikely that this port is already used by something else. I'm really not lucky in this case, but it could happen. And from the port are "hardcoded" in the PDF file I have no way to change it if necessary. Or I have not found how.

  Thanks for your replies

  Yes, you can start the xml (as the FDF) file and it will load th eform as well. To see what you need to do... .put a button on your form, and add the code:

  xfa.host.exportData)

  for the click event. Now make your form, fill it out and click on the button. It will ask for a file name (it will also be an extension of the XDP on the file). This is the file of XML (called as an xdp file). Open in editor xml and you will see at the bottom the reference to the model. Now if you run the xdp file it will open Acrobat and launch your form and merge the data into the form. Note that if the designer has been installed after Acrobat, then the XDP extension is on the designer (he thinks it is a native template file) and you will get an error. Make sure the xdp extension is registered in Acrobat.

  For the record, you can programmatically click the button submit whether it is visible or not.

  Paul

• Ranging from network WiFi problem

  My current installation (works perfectly!) is:

  -Airport Extreme (connected to a MacMini Server OSX)

  v

  Airport Express (WiFi connection to the EPA as an extension of network)

  Various devices are connected, air-conditioned and equipped with DHCP (Mac code) reservations, including the Airport Express.

  I need to install another (new) Airport Express to extend the network in a room where I have very limited it WiFi reception.

  Problem is that the new AE is not recognized by the Airport utility.

  At first, I thought because of DHCP reservations so that I plugged the EA directly to the Airport Extreme.

  Bingo: the Airport recognized the new AE utility, allowed me to update the firmware and did the configuration. Of course, as a wired connection. I was able to get the Mac address of the AE again.

  After all this was done I disconnected the new Airport express, has made a necessary DHCP reservation for the new AE and tried if now, it connects to the WiFi. N °

  Only the orange light flashes.

  Airport utility is showing the "old" set-up works perfectly (green dot) and the 'new' AE still cabled to the Airport Extreme, but with the message that it cannot find the device allowing me to 'forget '.

  What I am doing wrong?

  I need to install another (new) Airport Express to extend the network in a room where I have very limited it WiFi reception.

  Can confirm you that the AirPort Express Terminal will connect back to your main AirPort Extreme to extend the network? We ask this because Apple won't allow the network be extended twice.

  Another way of saying the same thing is that you can have more than one airport, extend a wireless network, but each extension must be connected to the 'main' airport, not to another airport that is already set up to expand the network. This means that each extension would be at about the same distance from the main airport... and... ACH Extender must be closer to the main airport rather than another airport that already is the extension of the network.

  What I am doing wrong?

  At this point, you configure the new extension unit to connect using a wired Ethernet connection, so the Express is programmed to expect a wired connection. When you remove the Ethernet cable, the Express can't find the link that he had been informed to use logging by using Ethernet.

  The bottom line... implement you the Express way will connect to the network. If you want the airport to connect using an Ethernet cable, you set up this way.  If you want the airport to connect wirelessly, you cannot use an Ethernet cable to implement the Express.

  But, first of all. We need clarification on the first question above... before... we approach overall to the top of the new Extender.

• Satellite A100-405: after ranging from sleep USB devices will work

  When I bought my laptop about a month ago, I received a message on the peek at the energy of usb hub (I hope it's the right translation, because I have a Dutch version) whenever I have start from standby mode.
  On the windows site, he said that you can turn off this message, so I did.
  But now when I start the laptop to sleep, my usb devices no longer work.

  Can someone please help me solve this problem. Or can someone tell me if it is a hardware problem that can't be solved by returning the laptop for Toshiba?

  Hello

  You must update the BIOS again! There is a new version 5.20 !

  This should fix any problems that may occur after the update to version 5.10 of Bios.

  Please come back and to report if this procedure has helped or not! Good bye