Ranging from network WiFi problem

My current installation (works perfectly!) is:

-Airport Extreme (connected to a MacMini Server OSX)

v

Airport Express (WiFi connection to the EPA as an extension of network)

Various devices are connected, air-conditioned and equipped with DHCP (Mac code) reservations, including the Airport Express.

I need to install another (new) Airport Express to extend the network in a room where I have very limited it WiFi reception.

Problem is that the new AE is not recognized by the Airport utility.

At first, I thought because of DHCP reservations so that I plugged the EA directly to the Airport Extreme.

Bingo: the Airport recognized the new AE utility, allowed me to update the firmware and did the configuration. Of course, as a wired connection. I was able to get the Mac address of the AE again.

After all this was done I disconnected the new Airport express, has made a necessary DHCP reservation for the new AE and tried if now, it connects to the WiFi. N °

Only the orange light flashes.

Airport utility is showing the "old" set-up works perfectly (green dot) and the 'new' AE still cabled to the Airport Extreme, but with the message that it cannot find the device allowing me to 'forget '.

What I am doing wrong?

I need to install another (new) Airport Express to extend the network in a room where I have very limited it WiFi reception.

Can confirm you that the AirPort Express Terminal will connect back to your main AirPort Extreme to extend the network? We ask this because Apple won't allow the network be extended twice.

Another way of saying the same thing is that you can have more than one airport, extend a wireless network, but each extension must be connected to the 'main' airport, not to another airport that is already set up to expand the network. This means that each extension would be at about the same distance from the main airport... and... ACH Extender must be closer to the main airport rather than another airport that already is the extension of the network.

What I am doing wrong?

At this point, you configure the new extension unit to connect using a wired Ethernet connection, so the Express is programmed to expect a wired connection. When you remove the Ethernet cable, the Express can't find the link that he had been informed to use logging by using Ethernet.

The bottom line... implement you the Express way will connect to the network. If you want the airport to connect using an Ethernet cable, you set up this way.  If you want the airport to connect wirelessly, you cannot use an Ethernet cable to implement the Express.

But, first of all. We need clarification on the first question above... before... we approach overall to the top of the new Extender.

Tags: Wireless

Similar Questions

  • "BOLD" of Smartphones from blackBerry WiFi problem: was not associated with the network

    All of a sudden I have a problem connecting to my home network with my "BOLD".  The "BOLD" detects the signal to my network, but when I try to connect, I get the error message "Network partner failed."  I checked the WEP code several times.  And I have connected to the network several times in the past.

    Acutally, although I did a battery pull, your suggestion gave me an idea.  I restarted my ethernet hub, and now the "BOLD" connects to it again.  Not sure if this is what he does, but it does not work so I'm not going to question him.

    Thanks for the quick response.  I really appreciate the service.

  • HP Pavilion DV6 3050TX: (low range) wireless network driver problem

    My hard drive and motherboard both damaged so I installed a new hard drive and the motherboard and install a new copy of Windows 7 Ultimate (64 bit). But after installing a new copy of windows, the serious problem that I found are to find the right drivers for the wifi and bluetooth. HP has listed a lot of driver for bluetooth and WIFI but that is just and appropriate is not found. Not my WIFI range is decreased. Whenever need to uninstall the driver and reconnect after a few hours of use. As his 'Problem with access point or wireless adapter' shows in troubleshooting. I also installed a software called "Connectify" what internet part of the computer laptop connect as WIFI Hotspot but same problem the range is extremely low, even I keep my mobile phone or another close HP DV6 3050TX bar signal shows only 2 bars. List of available drivers for HP Dv6 3050TX in the official site of HP 2011 Atheros Wireless LAN Driver (sp52131) Broadcom Wireless LAN Driver for Microsoft Windows 7 (sp48591) Intel PROWireless drivers for Microsoft Windows 7 (sp51096) Intel Wireless drivers for Microsoft Windows (sp53540) Ralink 802.11 bgn (sp52534) only WiFi Driver Broadcom Wireless LAN adapter works for me with low-end but often you have to uninstall and reinstall because a few hours after his stoppage of work as "No Internet access" Please give me a correct version and last updated WIFI Driver for HP Dv6 3050TX

    Hello:

    The photo on your screenshot shows that the Broadcom wireless card is present and functioning properly.

    So, if you are unable to connect to the internet, unfortunately, I won't be able to help you with that.

    That would be the best driver for this card.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  • Laptop WiFi problem, «identifying...» (network name) ».

    Hello
    I'm having a problem with the wireless on my laptop. Its a HP Pavilion dv6000 and just under a year of age. I had no problems with the wireless until recently. I use the laptop at home and usually the internet is very well (apart from the occasional disconnection), but when I'm at school do frequently connect to the school network (I am a student of the University, and there are several routers throughout the school and in the many buildings). Sometimes it will connect in one building and I'll switch to another and it does not connect. Each time, he does not connect it always says "identifier...". (wireless network name) ». No amount of repair, restart or reset the network card it won't connect. The strange thing is that sometimes it connects to the router in this building (i.e. library) and sometimes it won't. Whenever I have check the status shows that the laptop is received but does not send do not.

    Help! This problem is really starting to annoy me and I don't want to end up throwing my laptop on the whole of the library.

    Hello

    1st brand one Restore Point so that you can return back if necessary (it shouldn't be though).

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    --------------------------------------------------------------------------

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Do another restore Point then you can go back to where you were if necessary with new active pilots.

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    I would like to delete ALL networks, so you can restore if necessary.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

    If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

    Hello Anshul230499,

    Thank you for using communities of Apple Support.

    If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

    If a download application is interrupted

    Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

    Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

    Troubleshooting the Mac App Store

    Take care.

  • Problems of synchronization/Notification on network WiFi home

    I asked over on reddit without any successful response.

    In fact, when I'm on my own home Wifi network, I have a lot of apps that simply do not synchronize. This includes gmail, fitbit, Foxnews, Snapchat, WhatsApp and various games. Some applications will be sync intermittently (I've seen whatsapp messages appear about half an hour late). Some of these applications work when I open them and use them, some do not work until I have turn off my WiFi. Many other applications (Facebook, Twitter, etc.) work as usual.

    If I go on the 4G network or any other network WiFi (for example at work), things work perfectly. As soon as I'm leaving my home network, I all of a sudden all the regular notifications.

    Here's what I did to try to remedy the situation:

    • Restart my router


    • Factory reset my router


    • Forget my networks


    • Change my SSID (it's actually worked for 10-15 minutes)

    Someone at - it any other suggestions as to what I can do? I saw at least 2-3 other on reddit that have this problem. He started shortly after the upgrade to 5.1.

    Thanks in advance.


  • I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

    I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

    Sorry to hear that, but the screen is bad and must be replaced!

    Good luck! Please rate me upward if you find my post helpful. Thank you!

  • iPhone WiFi problem

    Hey, my iPhone 5s has a Wifi problem. I'll send text messages, but will not work iMessage. I can receive emails and receive phone calls. But, when I open my apps video/social media (Youtube, Amazon, Instagram, Snapchat, video etc.), the wifi does not work. Can someone tell me how to fix it? Thank you

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Why is that every time I open an application that my phone disconnects from the wifi

    Everytime I open an application that my phone disconnects from the wifi.

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • HP pavilion 15-ab522tx: wifi problem

    When I surf the internet, I have several errors in dns which never gets fixed for troubleshooting. I tried to contact the service center, but all they do is to reinstall windows and all files m went whenever they do it! I've been there for more than 5 times, but no solution has been found and its almost 6 months today because I bought this laptop. I am facing this problem since the first day I got this laptop.

    SOMEONE PLEASE HELP ME! REALLY ANNOYED WITH THIS PROBLEM

    Hello @jay05,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I came across your post about the WiFi problem and wanted to help!  I understand that you have found the DNS errors.

    First of all, try to review the steps offered by Community Member

    @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source: fixes Common for wireless connectivity problems.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • E-all-in-one printer WiFi problem 3520

    Product name: 3520 e-all-in-one printer

    WIFI problem ofline whenever we want go print

    I bought a HP 3520 printer e-all-in-one, cause it can print ussing WIFI. But I am very satisfied! Whenever I want to print, the printer go to ofline and is not able to perform the task of printing sent from my laptop. On my laptop, I have windows 8 and I installed the right driver. Yet he expect regeister once more my printer and install the driver all over again before finally seeks to print. For me with the amount that I have to print this is does not work!

    I'm regretting that a lot i let the salesperson talk to me by buying a Hewlett packerd. Because I have this printer now a little more than six months and already want to trow I have a very high roof. Previously I also had bad experience with a Hewlett Packerd printer!

    Hi idebont,

    If you haven't already done so, please run the PSDR.  Find and fix common printer problems using the tools of diagnosis HP for Windows?

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

    This ensures that the printer is full on and can help this situation.

    We need to know if the printer or router is to lose the connection.

    You have a flashing wireless to the printer when you try to print from the computer or is the light solid?
    If it is flashing then the printer tries to find the network.
    If the light is solid, it is on the network. Try to print from a mobile device, if they are configured at the printer.

    Print a configuration page to see if the printer has a valid IP address.

    Printing a Network Setup Page.

    Type the IP address in the address bar of your web browser. (Internet Explorer)

    You can access the Web server integrated for the printer when the printer is in offline mode on the computer? (EWS)

    If you have a valid IP address and you can access the Web server integrated for the printer, then perhaps changed the IP address assigned to the printer to the router. So the origin of the computer does not find the printer. (setting up a static IP will solve this problem)

    Check the port showing on the computer to verify that it matches the IP address of the printer.

    Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

    Click on configure port to display the IP address.

    If the IP address does not match, and then create a new port with the new IP address.

    Close the port to configure.

    Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  • Wireless network connection problem

    Nice day

    I have a wireless network connection problem and I ask for help to resolve.
    What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

    Other devices and computers connect with success so I think that the problem in my laptop.
    I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
    Troubleshooting of Windows detected 'router or access point issues '.
    -Reset the router does not resolve the problem
    -Network adapter is enabled.
    -State of wireless card "working properly" and "update".

    I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

    * My laptop info. :
    DELL INSPIRON 3521
    Windows 7-64 bit
    Dell WIreless 1703 802.11b/g/n(5.2GHz)

    Sorry for this long to make, I appreciated all the help.
    Thanks in advance.

    Hello

    Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

    I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

    In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

    Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

    I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

    Todd

  • limited access on wifi problem

    While on my wifi, I sometimes get a label restricted and can not get on the internet, but it is still connected.  What should I do to correct the problem?

    Hello
     
    Method 1.
    Let us begin with the network troubleshooter and check if it solves the problem automatically.
    See the article below for more information and measures.
    Using the troubleshooter from network in Windows 7
    http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-
     
    Method 2.
    Also, try the methods listed in the section below and check if helps solve the problem.
    How to fix network connectivity problems in Internet Explorer.
    http://support.Microsoft.com/kb/936211/

     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • WiFi not away from keyboard wifi button.

    I've updated my wireless driver and software from HP 1000 PC laptop. When I click on wifi ON / OFF button, my not on wifi. I found a monitor Panel with cross on the task bar.  How do I on my wifi?  (64-bit Windows 7).

    Hi Dr. Muhammad,

    Have you made changes on the computer before this problem?

    This problem may occur because of the connection or the wireless settings.

    Try the following and see if it helps.

    Method 1:

    Go to your wireless network card properties and make sure that this option is selected:

    So, follow the below mentioned steps.

    a. click on start

    b. Select control panel click on network and internet (or network and sharing)

    c. Select Network option options

    (d) under the terms of the option network click on manage network connections then select your wireless NETWORK card and right-click on it, then make sure that this option is selected.

    Method 2:

    Check the wireless network card to Device Manager.

    (a) right click on computer

    (b) go to the Hardware tab

    (c) click on Device Manager

    (d) to develop the selection of network cards

    (e) ensure that your wireless card is not disabled and displays it on the list.

    (f) if it is disabled right click on the device and select

    Method 3:

    Refer to the steps in the following Microsoft article.

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    Hope that the information provided is useful.

  • Windows app store does not and wifi problem

    Hello

    I use a dell inspiron laptop. whenever I am connected to internet through a wifi the network icon in the taskbar seme limited sign even when I can't surf the internet and download videos with a speed up to 1 mbps download.
    whenever I boot windows store it also shows that the pc is not connected to the internet. for this reason, I am unable to update my windows.
    Help, please.
    Thank you

    Hi, Germain,.

    You can try the following steps and check if that helps.

    Method 1:

    For the limited task sign view bar please see the instructions below.

    First of all, try to use the network adapter troubleshooting utility to automatically find and fix some problems. This troubleshooting will be disable and re-enable the adapter and try a few other common repairs:

    • Open the troubleshooter from network card by sliding into the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, and then type or by clicking on the resolution of the problems. Press or click Network and Internet, press or click on the network card and follow the instructions on the screen.

    Method 2:

    For the problem the Bank of Windows, refer to the steps below.

    Step 1:

    Reset the Windows Store Cache.

    a. pressWindows + R on your keyboard to open the Run dialog box.

    b. typeWSReset.exe, and then click/click onOK.

    c. the information store now open and indicate the following:for the store cache has been cleared.

    Check if the problem is still there.

    Step 2:

    Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

    (a) select the Internet Explorer tile on the start screen.

    (b) turn left click on the settings icon in the lower right.

    (c) select Show the desktop. You will be guided to desktop Internet Explorer.

    (d) select settings (speed) icon in the upper right.

    (e) select Internet Options in the menu drop-down.

    (f) go to the connection tab on LAN settings from the lower right of this window.

    (g) uncheck the box that says "use a proxy server for your LAN settings.

    Please post back with the State of the question.

Maybe you are looking for