Pen contour smoothing

Similar Questions

• Where can I find pen and smooth/Sharpen Edges option in Adobe Element 7.

  Where can I find pen and smooth/Sharpen Edges option in Adobe Element 7.

  Make your choice, then select > feather.

  Select > refine edge

• Contour pen late question on Surface Pro 2?

  I'm having this problem where the original race seems to be a delay and creates a straight line at the beginning of each stroke. I recently bought a year of all programs on the Cloud service creative in the hope that I could use CC animate particularly for animation, so that has been incredibly frustrating to treat. This problem does not appear to me in Photoshop CC.

  

  As you can see in the picture above, it is very visible, especially at larger angles. This happens with all the tools to animate CC, much as in the previous case, I was using the Brush tool.

  

  Above is a comment that I made using paint brush.

  If you look closely, it detects the start of the race, but only continues to follow the pen after a short delay, thus causing the effect of the straight line.

  I use settings/default preferences in CC to animate and have only changed the layout of the workspace to 'Host', although this change does not appear to have any effect on the problem. I tried to change settings such as smoothing, pressure sensitivity, tilt, and none of the above will fix the problem. I completely wiped my computer and installed Windows 10 Pro (this problem before in Windows 8), and the issue has not been resolved.

  Information:
  Running the 64-bit version of Windows 10 Pro with all the current news (to date).

  Animate CC 2015.2 (Build 15.2.1.95) with default preferences.

  Using a Surface Pro 2 with a processor Intel Core i5-4300U.

  I tried:

  As an administrator
  Reinstall the drivers

  Disable the touchpad and writing Board Service

  Display on or off timing of the ppp settings high (although my display settings are 100%).

  Priority passage of superior service, etc.

  Disabled flips and hold action in the pen Options.

  Change of smoothing, pen pressure, tilt and various other options within the CC to animate.

  If anyone has the solution to this, please let me know. I would like to start with CC animation animate as soon as possible, but with this question, I won't be able to use it. I've already dug around many old posts on similar problems, and none of the solutions are applicable.

  Sorry to tell you this, but yes there late and is not the program. The graphics card on the Surface Pro 2 is simply not powerful enough to handle vector calculations, that's why you see him do straight lines. He cannot calculate the curves so that lack them, and ends the line without these curves so that the line is straight. I have a Surface Pro 2 as well, and it doesn't work with Animate.

  I have owned dozens of Tablet PCs and while they cool for doodling and suspended in cafes, unfortunately, they have no power of real transformation despite what they're trying to tell you about the ads and Animate needs causing a mixture of questions which dates back to the time of macromedia Adobe set in many ways, but the Brush tool still stands as something difficult to do better in the program even on computers of Office, let alone a tablet.

  In fact, there is only one compressed everything that I've ever seen who can handle vectors animate/Flash and is the companion of Cintiq. You8 can currently buy on eBay for about $1000, and while I'm sure it helps a lot of you with your tablet, at least you know that's not a bug, and it is not something that Adobe can probably do about it.

• Problem with the pen, lines and smoothing tool tool

  I draw the line 1.

  

  Then I pause (click the arrow and then click on the new tool pen) and draw of the line 2

  

  When I finished there is a surprising gap in line 1 after the intersection of line 2:

  

  Then when I use the resulting mixture too the abstract looks at-non-contigue with dashed lines:

  

  instead of something of a continuous and uninterrupted wave lines like:

  

  For me, the problem is clearly the gap appear but I do not understand why it appeared, when as shown in image 2, I clearly I paint complete lines.

  Please check if the lines (at least one of them) with a filling.

• Pen digitizer yoga ThinkPad not replaceable?

  Hi all

  I bought a thinkpad yoga with digitizer and when I tried to change the digitizer pen I can't get out. (I'm thinking a tib felt or rubber could never scratch the screen and he could give a better idea)
  I tried the wacom tool to get the pen out and even a clamp tool Switzerland resulting a ffed place pen still in place, and I have to smooth it with sandpaper.

  Lenovo was really so stupid not to make the feathers interchangeable or replaceable? Kind of majorly disappointed if this isn't...

  The Yoga FRU BOM TP: http://download.lenovo.com/parts/ThinkPad/yoga_fru_bom_20140319.pdf the digitizer pen is FRU P/n: 04 X 6468

  Looking at this page: http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD030464 the digitizer pen carries a P/N: 4X80F22110 marketing
  

  You can use the FRU P/N to search the site of service parts: http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/PromotionDisplay?promoName=pa...

  Both numbers can help you look for suppliers 3.

  I hope this helps.

• Smooth sinusoidal movement without gear, buffer/modelling on board?

  Hello

  My ultimate goal is to have a stepper motor (200 steps/rotation) to produce a movement sinusoidal smooth at 1 Hz with an amplitude of 200 to 500. Everything I've read so far has lead me to believe that this is impossible, given the motion control 7330.

  My best results have been produced when an array of points have been created and used to change the Position of the target inside a While loop. The frequency has been changed by changing the number of points in the table representing a cycle complete (an array of 32 data points of results at a higher frequency than a table of 64 data points). However, it was not acceptable because the motion to 1 Hz was not smooth. I tried to play with acceleration, deceleration, speed and time of the S-curve, but nothing helped.

  I thought to 'Load Circular Arc' VI using the and just assigning the axis of the 2nd motor out as artificial, but this isn't a good solution, I will eventually use all 4 axes of motorization.

  My question: is it indeed impossible to produce a smooth sinusoidal movement of 1 Hz with a controller of axes 7330? I realize account 'smooth' is objective, but circular motion produced by the VI 'Load arch' is 'smooth' is enough.

  Hardware/software:

  PCI controller, 7330

  MID-7604 motor control

  LabView 2009

  Any information on this matter is greatly appreciated. Thank you

  Nick

  Nick,

  as it seems that you have already found all the possible solutions for your task. In fact, bow moves with a fictitious axis would be the only reliable solution for your configuration. If you can't afford to waste one axis, the only alternative is to move to a 7344, which takes care of contouring.

  Please note that the 7330 is our low cost solution for the tasks of control of movement with engines step by step. Advanced trajectories are not as part of this product, so if it is a requirement, please contact your local branch of NOR. If you have recently purchased the 7330 or not, they might be able to offer a hardware upgrade to the 7340.

  Kind regards

  Jochen Klier

  National Instruments

• Acer Aspire R13 problems active Pen (R7 - 371T).

  I bought a new R13 Aspire, with recommended acer active pen for this model. Touchpad is flicky and wobbles in his laptop computer screen resolution (very unpleasant to use) place and brightness are great and it is very sensitive to the touch of the finger and capacitive pens.
  However when I use the active stylus, it works very well for about 5 minutes and then it starts to jump and jump and then the pen stops working. After a reboot, pen starts to work, but same thing happens. When I pass the pen on the screen he sees clearly, but the movement is not smooth, in the same way, when I use the stylus to draw he jumps and jumps a lot. I calibrated my monitor and the problem still persists.

  Also ACER calls for the rejection of palm, and palm rejection does NOT at all.

  Anyone had the same problems? or your active pen works perfectly, I can't determine if the problem I have is from the pen or screen.

  Any suggestions? or comments?

  I sent my camera previous back and got a new one from microsoftstore. It seems that the problems I had were specific unit. This new one works fine, the touchpad in the last laptop has obviously had a physical since problem she wavered and has not identified any multi-geste.

  I'm happy with this one, it has a pilot updated synaptics, not the most recent one (there is a new Synaptics driver on the Acer site for this laptop that does not yet install) but it works.

  Contacted technical support and asked why not install updates it seems that this model is still a work in progress. They are updating the drivers, software managments power etc.

  Pen Active Acer works very well in ONENOTE, because the application rejects touch capacitive and works only with the participation of digitizer. but in the other Palm apps rejection does not work. I'll trade my pen as well and see if the problem is with the pen or not.

• Should what pen I use with my Inspiron 15r touchscreen portable computer? A "Wacom Bamboo Stylus feel" will work with him?

  I need to know if there is a stylus I can use that looks and feels just like a pen, I don't like the compressible rubbery feel of a pen, they are not quite smooth.

  Hey Phillipe,

  Welcome to the Dell Community.

  Yes you can use the stylus with this system.

  15z has 15.6 "screen LED backlit LCD capacitive multi-touch, so you can use Targus stylus with this system, which recommends Dell. For more help, you can click on the below mentioned link:

  http://bit.LY/VoK4ml

  Wacom Bamboo Stylus feel is the new pen from Wacom that a user of this forum says works well. The site, http://bit.ly/WSqVAQ , says that it is compatible with the 10 latitude. Technically, all of without batteries (somehow the Tablet PC-powered wireless) motor Wacom stylus should work.

  Please answer me if you need additional assistance.

• Pen do not respond in Fresh Paint Microsoft Surface Pro

  I have a Microsoft pro surface.  Everything works fine except when I use the stylus in 'wet paint '.  The stylus work absolutely fine on all other programs.  However, when I try to paint in "Fresh paint", I have to press to be exceptionally difficult to get barely a brush stroke.  When I use my fingers, paint out of normal.  Y at - it a setting or something escapes me?  I wish I could use the precision of the stylus with this application, as it was one of the main reasons for the purchase of the Surface pro on something like an IPAD.

  San\m

  I re - calibrate the pen.  However, stylus calibration only affects the calibration of the screen.  It does not affect the sensitivity to the actual pressure.  In addition, this problem is only located in the wet paint.  I even tried to reinstall the program.  Is this a known problem with fresh paint and pen input?

  Hello
  I'm a developer with the team of fresh paint.

  I use daily the Surface Pro with the stylus.  In view of all the devices/engineers in our team, we find the pen interaction to work smoothly on the Surface Pro.

  If you don't mind, you would follow with us the Feedback to paint fresh ?  It sounds as if there is a problem any with your specific usage scenario.

• Photoshop does not recognize that my tablet pen pressure

  Hello

  But back in August I had a graphics tablet (Turcom TS-6580) for my PC so I could use the pen pressure and have smoother lines in my digital art that I create using Photoshop. However

  When I tried to use the pressure of the pen would not work so I had lines that were as flat as those would have created a mouse. At first I thought it was my Tablet and I had lost my

  silver, but I tried a few other programs such as Paint tool Sai and Adobe Flash and pen pressure works very well it is. I tried a few things like uninstalling the driver and reinstalling it but that

  has nothing, I took some advice and downloaded the driver from the site Web Turcoms but that only that make things worse and honestly I feel as if I'm missing something really obvious then

  If anyone has an answer for me I would be very happy.

  Thank you

  

  Hi colebalt,

  See this thread: problem of pressure with Wacom Intous5

  Kind regards

  Claes

• How to make a scatter plot curve smooth?

  I do a diagram of dispersion plot, with the values supplied for the diagram.

  I plugged all the points on the line, but I get these 'sharp' corners whenever the curve changes direction.

  How can I make cela a smooth curve?

  

  Thank you

  Convert anchor points using the pen path tools.

  Mylenium

• Make smooth lines

  OK, so I just started with photoshop so I can miss something obvious here, but I'm adjusting my brush tool so that it has little weight on it to help smooth out the lines. In the past, I've always used Gimp to draw and he had this function directly on the Brush tool and do more simple lines (see on the left). Is it possible to do this in photoshop aswell?

  

  Photoshop is not brilliant at drawing nice smooth lines because of its pixels edition of origins. It cannot easily reproduce the curves you can get with programs like Illustrator drawing because the lines are not mathematically derived, instead, it sets out just of pixels. You will get a better result by using the tool on the fly pen and then trace the path as shown above, but is not the same as any drawing on a canvas. Generally, the softer the brush you use smooth the trace will be to look at, but at the price of seeks don't pointed not.

  If the very smooth brush strokes are important to you, there is a tool called Nezumi lazy Pro. I would say its proximity of necessary if you are a professional graphic designer, as he completely solved the problem. Problem is it's not free, but not very expensive is around $35. Here are two curves drawn with a mouse using exactly the same brush settings. As you can see smooth LNP off sharp edges when there is a change of direction. It also works with happiness with a mouse it really is designed for smoothing production of tablets and is very good at handling sensitivity much higher pressure actually to what you get with drivers from manufacturers only. If its purchase value depends on how much of this kind of thing that you do, but there is a 14 day free trial. http://lazynezumi.com/

  Hope that helps

  Terri

  

• Please help problem pen in illustrator

  can someone please help my pen leaves only brush strokes as soon as I remove it from my Tablet it works fine in other programs and was working fine last night

  Some problems could be solved by updating Illustrator to the latest version: 19.1 (check "On Illustrator")

  mike19867 wrote:

  I scanned some of my manga art used as a model and make a digital contour using my Wacom 13 hd Tablet cinteq. I almost succeeded in this part of my project last night. as I found that I had a few micro gaps that prevented me from adding color to my project this morning.

  We're talking about live paint?

  Examine options for space and turn them on.

  My stylus leaves single brush strokes once I remove my Tablet but the mouse worked traits normally I panicked, thinking that my Wacom was defective, so I tried in other programs and it worked fine I could c the race progresses as I was since summer in illustrator I banging my head against the wall , trying to get it to work again.

  You lost me after the 3rd word. Breathe between writing and put interpunction here and there and then maybe someone has a small chance of him have.

  But: a stylus is not supposed to draw lines when you remove it from the Tablet, it so I guess that what you are describing is just normal behavior?

• Assignment of attributes of the shape (contour/background) to existing shape via the screening tool does not work...

  Hey guys,.

  in earlier Versions of Photoshop CC I could choose an existing shape, then assign attributes by using the drop-down list of the screening of the tool (i.e. of the pen tool). My workflow has been something like this:

  -Initially affect the attributes via the drop down menus of contour/background while the pen tool is selected.

  -Create a "Preset" tool contour/background settings.

  -Assign these settings to various forms via the Preset drop-down list.

  My habit of presets custom newly created "work more, it still works for the"integrated"Presets, though (i.e. peanut Dash preset the tool pen).

  Anyone having the same problem / found a solution?

  TIA!

  SEB

  In fact, one click worked, there was just a delay. My drop down remains open. Have you tried to reset your preferences - first of the tool, and then for the PS, if this does not work?

• Problems with the pen of the Surface Pro 3 in Photoshop CS6

  I used photoshop CS6 without any problem on my old computer that was connected to a graphics tablet.

  However, I recently bought a new computer windows called Surface Pro 3. Everything works perfectly with the trackpad and touch, but I had some problems with the pen of Surface.

  The feather can if support on the Web, but every time I click on something on any windows with the pen, the whole application hangs and I have to click on the task bar of the computer down to unlock the application.

  It is impossible to work like this. Is there a solution for this problem? It is said that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

  If you have Photoshop CS6 version 13.1.2, which is the version of subscription to Photoshop, you shoule Isstall Photoshop CC 2014 on your surface Pro 3.  It will work smoothly on the surface Pro 3 and you will also have the option have to use Photoshop CC 2014 preference 2 x UI to Photoshop UI scaling upward in size on your Surface Pro 3.

  If you have not a subscription perpetual windows CS6 version should be version 13.0.1.3.  In this case the only way to scale Photoshop UI must have windows do. You need to update your registry windows 8.1 database and add an external Photoshop manifest file in your folder of Photoshop CS6.  For Surface Pro 3 pen to work with Photoshop, you must install the device drivers for the NTig the wintab API support pen.

  You will not be able to use Photoshop without a keyboard appear on the windows screen keyboard is too heavy.  You can use a utility like button to create keys to touch Overlay on Photoshop and use Photoshop without keyboard.

  Betweek 2XUI Adobe scaled areas an ise windows resizing windows scaling of the image of scalet differece as well as the Photoshops UI

  

  A couple of key overlat keyboards may look like this