Pen drive not accessible, incorrect function

Similar Questions

• Portege M400 - CD/DVD Drive not accessible, Incorrect function.

  Hello

  We have 1 machine that shows the above error, and strangely enough, it is only to show this error when you try to play the DVD. CD is reading and fine engraving. The H/W is a carpet * a DVD - RAM UJ-8425. The drive is correctly activated and we have about 100 other machines with exactly the same formatting and set up using XP that do not display this error. I changed the H/W and uninstalled and reinstalled the drivers of devices, but without result.

  Anyone has any ideas that can help?

  See you soon

  Steve

  When you get this error message exactly? You get this error message if you're looking for a DVD or watch a movie on DVD?

  In your case, I would try to remove the upper and lower filters. Then follow this work around:

  (1) run Regedit (start > run > Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good luck!

• "Popup error ' A:\ is not Accessible, incorrect function" when you try to read the "A" drive in Explorer.

  When you try to read a disk in the 'A' drive from Windows Explorer, I get a Popup with a white 'X' in a red circle and a message that "A:\ is not Accessible" "Incorrect function" and an OK button at the bottom.  It happens to any disk, formatted or not, with the files or empty.  I replaced the disk drive - no help.

  I don't know if it's a windows setting went crazy or a motherboard problem.  My BIOS seems correct.  If I do a 'fill' of window hardware in administrative tools he tells me that I have data on the disk.

  I have XP - SP3.

  Any ideas-

  go to a command prompt and type "sfc/scannow" (without the quotes) and let it run... see if this is helpful at all.

  Hope do you feel better soon.

• All of a sudden I can't copy my photos to a CD E:\is not accessible incorrect function

  I'm used to be able to copy my photos on a CD - R. I'm on Windows XP.

  After clicking on "Copy" a small window appears "E:\ is not accessible incorrect function. What causes this problem?

  Hello
   
   
  1 did you do any change to the computer recently?
   
  See the methods listed in the articles below and check.
   
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
  
  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "incorrect function".
  http://support.Microsoft.com/kb/315350
   
  I hope this helps.

• Cannot burn CD R or RW. Message "D: / not accessible incorrect function".

  Message that appears

  D:/not accessible"."
  incorrect function ".

  Hi Montecasso,

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "incorrect function".

  http://support.Microsoft.com/kb/315350

  I hope this helps.

• E:\ is not accessible incorrect function what is the cause? How to fix?

  I am trying to copy "my photo" on a CD - R or CD - RW.  After the selection of items to copy, a window will appear indicating

  "E:\ is not accessible.

  Incorrect function

  Hi j.k.glissmann,

  · Do you have any CD burning program installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the links below: how to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP: http://support.microsoft.com/kb/324129

  Error message when you access the CD or DVD drive after upgrade you to Windows XP: "Incorrect function": http://support.microsoft.com/kb/315350

  With regard to:

  Samhrutha G S - Microsoft technical support.

• D:\ is not accessible incorrect function

  If the disk is empty is NOT accessible IF given it's accessavle.

  This with MS Internet Explorer

  Right-click on the Start button and select Explorer.  And use Windows explore not Internet Explorer to access your local hard disks.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  If the disk is empty is NOT accessible IF given it's accessavle.

  This with MS Internet Explorer

• : No is not accessible incorrect function

  I am running Windows xp and the dc LG dvd player was fine until a couple of days. I uninstalled Nero and used nero cleaning tool. I uninstalled the drive. I can read him, but cannot write to it. I have a problem with the drive not being recognized, but that has been resolved with Article ID: 316529. It does not seem possible for 3 drives suddenly malfunction at the same time - is this something to do with a windows update?

  Yes, a burner may stop working as a burner but still be able to play CDs or DVDs.  Looks like it's maybe your problem here.  Replace the drive should only cost $25 - $35 or more.  This is probably your best bet.

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=5284882&CATID=89

  Good luck! Thomas Dietrich

• Satellite A100-496: drive CD/DVD - incorrect function error

  Hello
  I am using Toshiba * Satellite A100-496 * laptop with Windows XP as operating system.
  When you use the CD player, I get the following error: -.

  * D:\ is not accessible *.
  * Incorrect function *.

  Can someone guide me to troubleshoot and identify a possible solution?

  Hello

  Go to the Device Manager and remove the drive from CD/DVD to the list.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the machine.

  I m not very well if this will help, but in many cases this work around was very helpful

• HARD drive not accessible

  I have two hard drives (C: and E :) on my computer. E: has been used as a backup. I now use an external HD for backup. When I re-formatted E: it shows the disc to be full when I check its properties. When I try to open Explorer or e: a window opens stating "E:\ is not accessible. The parameter is incorrect. "How can I get this back to a usable HARD drive? Thank you

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you run the clean command. Follow the steps mentioned below.

  a. Click Start and type cmd in the start search box and right-click on the cmd present in the menu.

  b. click on run as administrator.

  c. type the following commands as follows.

  DiskPart

  List disk

  Select disk 1 (if disk 1 is E :)

  Clean

  Note: Be careful while selecting the disc as it might format the other disk instead of e: take note of the size, and then check the size in the command prompt and then wipe the drive.

  d. check if you are able to recover the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lenovo USB 500 GB hard drive not Accessible?

  I recently bought a Lenovo 500 GB USB external hard drive. I kept all my back ups and video files it contains. One day I plugged the external hard drive to my laptop and do a backup of file inside and forgetfully system restore left the hard drive and my computer laptop battery for watch a movie outdoors. The evening when I went back and checked, I found my system shut down due to the discharge of the battery and when active windows had incomplete restoration and new restoration of the drive HARD has been giving a cyclic redundancy check error message. I installed a new windows 7 and I checked my Lenovo 500 GB external HARD drive, it was not accessible more and following problems were encountered

  1 system takes too long to appear Local of Lenovo 500 GB of hard disk drive icon.
  2 local Lenovo 500 GB disk icon HDD is not accessible or cannot be formatted.
  3. when any pen drive or usb plug is made, it is never detected or answered by system until the external HARD disk USB is disconnected from the computer.
  4. start of the splash screen stops when USB external hard drive is connected during boot and startup continues as soon as it is unplugged.
  5 file system went from NTFS to HTFS.
    
  What exactly is the problem? Is there anyway to recover my files from the external hard drive. I tried to share this drive and allowing the permissions, but everything is messaged inaccessible place.

  It seems that the hard drive has failed. Contact the manufacturer support for assistance. The drive can be replaced.

• HP X 705 PEN DRIVE NOT DETECTED IN ANY PC

  I plugged my USB on my laptop, and he asked me to dial before use. I formatted and the format has been successful. After that I was transferring some of my files and suddenly the USB connection has been lost due to unknown reasons. I reinserted it and then found out that it is not detected. I tried by assigning a drive letter in disk management, but I couldn't see my pen drive listed. I also tried to connect to other computers and devices, but none of them detected. I hope that there is not any problem with USB 2.0 as connection he used to work earlier. It could be a hardware problem and I can not return or ask the supplier I bought at snapdeal.

  Hello Hackerschoice,

  You say it happened when writing files to it. The player bumped or moved while this was happening?

  If the drive is not detected in ANY computer or device, then the reader has become physically corrupted or damaged in some way.

  If snapdeal will not honor a warranty for a recent purchase, your only recourse is to contact HP support directly for your country and ask questions on the help of the guarantee.

  Here is a link with the numbers of the different countries.

  HP technical support / phone call HP customer service

  Good luck.

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• Windows 7 sharing drive not accessible in Vista

  We just bought a new Dell with Windows 7 Pro 660 office.

  On the same local network, we have a Dell under Vista Home Premium laptop.

  On the unity of Win7, we shared a call from external drive DriveG.

  The Vista labtop cannot access DriveG even if we use the Login and the password.

  The system says that it cannot connect us.

  We have two computers in the same workgroup. Both are connected to the same router/modem.

  Note that the drive on the Vista laptop is accessible by the Office of Win7. The reverse does not work.

  I checked that the Win7 use HOMEGROUP (which isn't good that between Win7 computers.

  Can anyone suggest what to do?

  Any help would be appreciated.

  Please note that our previous computer was an Xp and that the Xp and Vista computers share the same drive without effort.

  Thank you.

  -John Olbert

  Hello

  1. What is the full error message do you get?

  I suggest you follow the given steps and later a update on the State of the question.

  Method 1: Troubleshoot file and printer sharing: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-file-and-printer-sharing

  Method 2: The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For your reference:

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• in windows 7 USB storage device is showing again c drive not accessible

  I can't access the USB key, but it clearly shows in the management of the comp as drive c!  When I click it it just hangs.  I ended up ejecting

  Go to Disk Manager (run diskmgmt.msc) and see if you can change the drive letter assigned.