pen entry respods loves to write the grandmothers

Similar Questions

• How to add the transient attribute for LOV (object of the view read-only)

  I have a view called CustomerView and attribute DepartmentId is present in it.

  Also exists DepartmentView and CustomerView.DepartmentId has an LOV from this point of view.

  I need to add a transient attribute to CustomerView which express the DepartmentName attribute in the LOV.

  Because of the view are read-only there is no entity object don't match them.

  How can I write the groovy for the transitional object expression.

  The name of the view accessor Lov's DepartmentView1

  Looking for your help. Thank you.

  Hi gcoban

  I do not understand your question correctly,

  you are not able to write to the expression property in viewObject?

  or you want to know how to write groovy for that?

  for writing groovy you need viewAccessor and you who have, you can try as Alejandro Tovar Lanz suggested

  or you can write code in RowImpl to fill in the name of the Ministry of the accessor

  See -https://blogs.oracle.com/adf/entry/combo_lov_how_to_display

  Thank you

• Write the key (path)

  I am developing a few screws that use Configuration (.ini) files in a Windows environment.  My problem is that writing a Windows file results of path in an entry in the C/Folder/File.dat form (form C:\Folder\File.dat).  Finally, there is an internal routine specific path to the common path which translates the paths of files Windows this version "oblique".  I start with a Configuration file which paths are in the 'Windows' format and want to create an output as file in "Windows" (not common) format.  [Turns out that the reading of a key (Path) has a common path to specific path VI "reformat" it, but if the format is already specific or Windows, the path, it will "pass through" unchanged, as it should].

  One solution, of course, is to recode the VI NOR myself, but this seems a bit excessive to me.  Someone at - it suggestions?  [Ooh, I don't think OpenG...]

  BS

  There is an entry in the key to write (String) VI which is ' chain brute writing? If you set this TRUE, it will write the string without the double-backslashes. Similarly, you have to wire a TRUE to the setting "read the raw string?" press the read (String) VI.

• Write the result of a query in ODI in file

  Hi friends,
  
  I'm using ODI 11 g.
  
  In ODI I want to write the output of the query to a file unix below.
  
  SELECT "H" | RPAD('SB9KT.) KTPRTO. EBSDATA. D0000000 ', '30', ' ') | RPAD (to_char (sysdate, 'YYYYMMDDHHMMSS'), 16, ' ')
  DOUBLE;
  
  
  Please suggest any entries.
  
  Thank you
  Lony

  delete ';

• Remove entries as a result of the ODS

  Hello
  
  I'm working on a few projects to OPA who use controlled substances and a large number of entity instances. We have a few problems with the performance and the size of the response and are studying all options to gain more speed.
  
  As indicated in the dev guide, a large part of the processing time of CESO's read / write the XML. With this in mind, is it possible to delete / disable the ENTRIES in the response of the ODS? It is accounting 98% + of our file response and size and performance time apparently. The only condition to our ODS response must include a small number (less than 10) of global objectives, as total amount, total days etc. We have no need to be presented with all entries again (for example, the attributes of base level for 5 000 instances)
  
  Is it possible to remove these to reduce the size of the answer and this will improve performance?
  Any help would be greatly appreciated.
  
  Best,
  Ben

  Yes, we will be looking at implementing this feature is a later version.

• X 220 pen orientation does not change with the rotation of the screen

  I upgraded to SSD HDD so made a clean install of Windows 7 Pro and load all the drivers. But pen entry orientation remains in mode of landscape even after I flip for reverse Portrait/Portrait/Landscape screen inverted modes.

  I tried to update the driver for WACOM pen several times without success. What I'm missing here?

  I own the X201T, but since you have a clean install I'll probably try the following:

  1 remove any drivers from Wacom/Lenovo/Windows (compressed ISD) touch panel--> programs & features

  2. launch Windows Update and see if he can find a driver for you

  3. If so, let it install and try if this is equivalent

  If that does not work, remove all new and try the same thing with the Lenovo update utility. Usually, when either one detects that the tablet drivers are missing, they pick those most recent. Of course the most recent are not always the best, but... I had a lot of problems with the Wacom drivers and Lenovo, so I eventually leave Windows Update searching for me.

  I lose the pressure sensitivity in Photoshop and ended up installing drivers from Fujitsu, but that's another story entirely.

• lov 2 in the same text element

  I create 2 LOV, I want to show in the same text element, the problem is: 1-) I want the code I have to write in the key_lstval. 2-) during the creation the 2 LOV, what I must do when I get the process of LOOKING up the VALUE return it... should I assign the text element LOV or leave it empty, because they are 2 lov allocation in the same piece of text. Thank you for your help

  == Use this one... and then check and confirm ==

  Start
  If: PYPSTSM_DATE > sysdate can
  SET_ITEM_PROPERTY ('PYPSTSD_STATUS_IND', LOV_NAME, 'LOV353');
  LIST_VALUES;
  on the other
  SET_ITEM_PROPERTY ('PYPSTSD_STATUS_IND', LOV_NAME, 'LOV368');
  LIST_VALUES;
  end if;
  end;

• I lost entry of Korean language with the upgrade to 10.11.5.

  I lost entry of Korean language with the upgrade to 10.11.5. Is it possible to download it somewhere?

  It is not in the list of languages to be added in system preferences > language and region?

  

• My keyboard is write the numbers instead of letters

  MY keyboard is write the numbers instead of letters. The firstbletterbiscok, but it converts every letter in a number

  It's very strange. Try contacting Apple Care phone number: (800) 275-2273

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

  Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

  When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

• How to write the comma delimited numbers of configuration file

  Hello

  In the attached Configuration File.vi write, I am trying to crush several whole decimal in the keys 1 and 2 of the attachment Test.ini. I am to convert the array of integers in a string. Because of this, the string written in the ini file is now being bracketed by apostrophes. What should I do to write the string without the apostrophes, as in the Test old.ini file?

  I appreciate your help. Thank you.

  Best regards

  Peter

  See here:

  http://forums.NI.com/T5/LabVIEW/configuration-string-keys-in-LabVIEW-2009-changes/m-p/1147371#M50489...

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• write the 1-d continually to csv cluster

  I would like to know how I can write the 1 d cluster. CSV?

  
  

• Cannot write the FFT of the integrated double data

  I am a beginner to Labview environment.
  I have acceleration Vs time dat file .lvm
  Can I get the double integration of this
  acceleration data for trip data.
  Can I get FFT of displacement and displayed on the graph.
  Up to this point VI works
  But now if I connect this FFT of moving to 'write the measurement file' then it displays error.
  Please help me... and correct the error...  All I want is two column data, frequency and

  the other of the amplitude of movement.
  I have attached all files
  I ask you to correct the VI please...
  Thanking you!

  The concepts that you'll want to research are"matrices", "indexing of tables", 'automatic indexing', 'cluster' and 'type of waveform data'.

  The loop IN the first VI I sent used the automatic indexation to take each element of a table 1 d of the clusters and perform operations on them separately to convert them to a waveform.  Exit tunnel also uses automatic indexing so that the end result is a table 1 d of waveforms.  I used the loop, so that no matter how many items appear in the table, you get a corresponding number of signals to the "writing on a file of measures."

  In this case, because the output of the FRF is a single cluster (and not an array of clusters), the loop FOR was not necessary.  The VI attached this time takes the output of cluster of FRF and maps the cluster to a single components build the wave function and you get a result of unique waveform.

  I have no sound and Vibe loaded on my computer at the moment, so I can't run your VI and see the result of the integration of the snout to the Cloaca VI.  The output data type is "Table 1 d of waveform" and your indicator and your two FRF can accept only waveforms.  I put a function between integration and the indicator/FRF array index, but if there is more than one waveform in the table, it would be the wrong solution.  My solution corrects the broken wires but throws waveforms 2,3,4... If they exist.