People scan status

On my MBP, I see the the following information when I click on people in the sidebar of Photos.

However, when I click on the people in my 27 iMac it goes always directly to page list all the people who exist in the data of my people.

Is it possible to get the status information shown above for the MBP?

If there is no statue, then the analysis is completed on this system

Tags: Mac OS & System Software

Similar Questions

listener to scan status
Hi all
any listener to scan status control over 10 gr 2

$srvctl status scan_listener
Use: srvctl < command > < object > [< options >]
$

It's giving the alert like this. even if I used

listener status $srvctl
Use: srvctl < command > < object > [< options >]

Oracle db also defined environment

Please help solve this problem.

Thank you
899329 wrote:
Hi all
any listener to scan status control over 10 gr 2

$srvctl status scan_listener
Use: srvctl

ANALYSIS of listening on 10gr 2? It is not a characteristic 11.2? If it was a typo, show us that you are at the correct House ( Gate House ) and you then run the command once more.

HTH
Aman...

get the ' scan status unavailable.

I hooked up a scanner to a usb port. Sound, but can not scan - it says under scanner status "unavailable". the driver is up to date and works very well. I can just scan?

Hi Erikw12,
- Tried to connect to another USB port to check if it works?
- What is the brand and the model number of the scanner?
However, you can access the Device Manager and check if there are errors for the scanner device and after return from the error.

http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

You can also try uninstalling the drivers and scanning software, programs and functionality and Device Manager. Later, download the latest drivers and install. Access the link below and follow the steps to uninstall the drivers and programs to monitor programs and features:

http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

You can also contact the manufacturer support scanning to check if you need to install any other drivers or updates to get the scanner to work.

I hope this helps. Let us know the result.

Thank you and best regards,

Srinivas R

Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Busy server on the scan status message

Whenever I try to scan a picture inside my image program (Paint Shop Pro 8 and HP Photosmart C4180), I get the error "server busy" message and instruction to "switch to" the other program... but what did open my Start menu.

What happens and how can I solve this problem?

Hello

Could you please answer this question below?

(a) is the printer connected over the network to your computer?
(b) not this problem occurs when scanning all types of image or only particular image files?
(c) from when are you facing this problem?
(d) it was working perfectly before?

Also check if scanner services are running on your computer.

Also he set to automatic if the status is defined in the manual.

Please note that this problem can occur if the program or application attempts to access the server to update for the last update when scanning the images.

Method 1:

Try to disable this automatic update functionality on your computer for that particular application.

Method 2:

Try disabling the security on your computer program and check to see if that solves the problem.

Make sure that you re - reactivate the security on your computer after program checked the issue.

Method 3:

Try to update the latest version of the driver for the device and check if it solves the problem.

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=nz&product=1141647&

Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

HP8500 print wizard displays more options etc, printer, Fax, Scan status

I have an OfficeJet Pro 8500 A910 a that works perfectly with Windows 7 64 bit.

Last night when I accessed the HP printer Assistant principal all functional selections such as analytical tools, Fax, printer, etc. have disappeared and the banner had changed. There are now only four choices; HP Printer Wizard (which does not), set preferences, see what will print, customize your printer.

I checked my phone, she still had the fully functional version of the software. This morning the laptop had changed too much to this useless program.

I tried to reinstall from the CD, but it has not fixed the problem.

There was a similar problem with the software for the 6520 Photosmart, which has similar software of 8500's A910 series. The problem is that the file of the printer Assistant association has changed. The following forum thread discusses what has happened and give a possible solution. Give it a try and let me know what happens.

HP Photosmart 6520 "printer assistant" will not work

Add people

So, I've updated for Mac OS Sierra. Have been using the Photos app since it was released and spent a lot of time organize using faces and now I have hundreds of photos to browse again and put names to people.

I'm in add people and get 632 white picture with numbers under. To be able to identify the people, if I add them, and then double-click it to view more deep - no images do not face appear.

I already went through and added all the images of virgins like that and then hidden, now, today, I have another more than 600 of them. Any ideas?

I NSB Sierra since the evening he lauched and use my Mac every day for that if he should have had time to complete the analysis now.

Thanks & Hello all

but he has finished scanning and - when you launch Photos and click on people get you people or a text for scanning status?

LN

When people added to the people page

Yesterday, I added about 40 photos Photos 2.0 I would like that they will be displayed on the page of people, how and when new photos added to the people, so they can be appointed

You have PHotos not iPhoto where you posted - I would ask that your message be moved

the process of people is a background scan and takes time - a completed initial people scanning? Once the initial analysis is complete I expect a little more complete in a few hours - make sure that the computer is powered and photos is not used - I always leave

LN

Scan IP is configured only in a single node

Hello
I configure Oracle 11 GR 2 (11.2.0.1) RAC in my VMware. When I checked the listener to ip and CT scan it shows that it is only set in 2nd node to the first node. The nslookup command works fine as indicated below, and when I checked the srvctl status scan_listener and scan of srvctl status it shows that it is running only in the second node. I checked in a few places where the srvctl status scan_listener and scan srvctl status command shows output of all nodes. Can anyone help me on what could be the problem or how to configure the ip address scan and scan listener in 1 node.
*********************
file/etc/hosts
*********************
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#: 1 localhost6.localdomain6 localhost6
#public
192.168.32.142 brand mark.oracle.com
192.168.32.152 nike.oracle.com nike
#private
10.0.0.56 brand brand - prv.oracle.com - prv
10.0.0.57 prv.oracle.com nike nike-prv
#vip
192.168.32.20 brand brand - vip.oracle.com - vip
192.168.32.21 vip.oracle.com nike nike-vip
#scan
192.168.32.153 db1 - scan.oracle.com db1-scan
192.168.32.154 db1 - scan.oracle.com db1-scan
192.168.32.155 db1 - scan.oracle.com db1-scan
****************************************
srvctl command output
***************************************
[oracle@nike bin] $. / srvctl status scan_listener
LISTENER_SCAN1 listener to SCAN is enabled
SCAN LISTENER_SCAN1 listener is running on the node nike
[oracle@nike bin] $. / srvctl scan status
VIP scan1 SCAN is enabled
VIP SCAN scan1 runs on the nike node
***********************************
NS lookup command output
***********************************
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.155
Name: db1-scan
Address: 192.168.32.153
Name: db1-scan
Address: 192.168.32.154
[oracle@mark bin] $
[oracle@mark bin] $
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.153
Name: db1-scan
Address: 192.168.32.154
Name: db1-scan
Address: 192.168.32.155
[oracle@mark bin] $
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.154
Name: db1-scan
Address: 192.168.32.155
Name: db1-scan
Address: 192.168.32.153
****************************************************************************************
Kind regards
007

Hello

This is the behavior expected if you use the file/etc/hosts instead of DNS/GNS. It is documented on the note ' RAC: frequently asked Questions (Doc ID 220970.1).

If you want to have more than one listener to scan, and then start using DNS for name of scanning resolution.

Kind regards.

Nelson

release-critical bugs Photos Sierra macOS?

I have two major problems with Photos:

(1) the analysis of 'People' is blocked to 589 photos more than 14000 + and it's been days that it is not finish the job.

(2) many thumbnails are missing (had a grey icon of a warning sign). I fixed the library (cmd - alt on startup) but no improvement.

As it is, the pictures useless. I don't want to depend on Lightroom. Help, please? Thank you

@

Bugs should be reported to the Apple - http://www.apple.com/feedback/

People scan is strange - my iMac completed in about two days - my MBA is still not done - all I can suggest is to give him as much time as possible with power and nothing in the course of execution - analysis is to consume a lot of resources

warnings of gray can be due to clean software - have you run any cleaning software? Often it damages rather than clean

LN

Unable to connect wireless with Photosmart 2510

I just upgraded my router from G to N. I have a Linksys WRT10N. My network is secured with WPA-Personal. Since I upgraded from G to N and WEP to WPA, I'm unable to get my 2510 Photosmart to connect to the wireless network. Initially, I was in WPA2 and downgraded my network to WPA with on security a bit of luck. I entered all encriptación WPA data in the web browser integrated prior to installation. I tried to install it several times and everything seems to go through OK but the blue light on the cover of never turns on again when the ethernet cable is disconnected. When I run the network config. page it says "scanning" status of wireless.
I talked to Linksys and they told me that the network N should work down to a B network printer. Does anyone have any suggestions?

Thank you!

Hi Kim,

All printers inkjet wireless HP since 2004 supports WPA - PSK and WPA2-PSK. All new HP inkjet will certainly support WPA - PSK and WPA2-PSK.

I'm more familiar with the WRT54G, but the WAPG works as well. Here is how to convert the WRT54G in a simple access point:
1. Connect LAN port of the WRT54G #1 and open the web without wire-router page (it should be 192.168.0.1 or 192.168.1.1)
2. Go to the wireless section of basic wireless settings. Create a new SSID and choose a channel without overlap, which differs from the WRT160N. In North America, the overlapping channels are 1, 6, and 11. Press to save the changes.
3. Go to the wireless security section and the configuration up to WEP. Press to save the changes.
4. Return to the configuration page. Disable the DHCP server and set the router IP address to something other than then the address IP of WRT160N. For example, if the WRT160N IP address is 192.168.0.1, and then set the WRT54G to 192.168.0.201. Make sure that the first three groups of numbers of the IP address are the same. Press to save the changes.
5. Now, connect an Ethernet cable between WRT54G #1 LAN port and one LAN of the WRT160N ports.

Norton Antivirus stops scannung in the file securityrisk.urlredir

My Norton Antivirus keeps have stopped at this file and it does not delete, quarantine it or pop it. I did some research and find that it a virus. How can I remove it if my Norton to date is unable to remove it. SecurityRisk.urlredir

As it is not a matter of Microsoft Windows Update, suggest that contact Norton.

http://community.Norton.com/T5/other-Norton-products/unable-to-remove-SecurityRisk-URLREDIR-getting-scan-status-as/TD-p/603408

http://community.Norton.com/T5/Norton-Internet-security-Norton/problem-removing-SecurityRisk-URLRedir-threat/TD-p/506900

Extract the database query result

QVariant workersList = sda-> execute ('SELECT name FROM people WHERE status =' WORKER' ;");)

Hi all

How can I get the result of QString QVariant workerList variable?

Thank you

Change to QVariantList QVariant and access of
```
        foreach(QVariant v, workerList) {
            QString name = v.toMap().value("name");
            //... Do something with name
        }
```

How report us suspicious books, etc. on the oracle certification?

How report us suspicious books, etc. on the oracle certification?
For example, go to www.amazon.com and enter the following "marathon of the Oracle.
Look at books, etc. "by M.

user6862024 wrote:

How report us suspicious books, etc. on the oracle certification?

For example, go to www.amazon.com and enter the following "marathon of the Oracle.

Look at books, etc. "by M.

Well seen.

Certainly on amazon.co.uk there was a bunch of braindump kindle publications in February. It was a link to a url in one of them and certguard.com said braindump site. In general only unpublished reputable publishers on amazon... now here can be a risk people scan a few pages/PDF of the copyright and area to make a quick profit.

https://blogs.Oracle.com/certification/entry/cheating_part_7_what_can_you_a indicates that you can send an email [email protected] (they will not respond normally, but I know they'll take advice.

You can also get the same email Global FAQ... search "fraud".

(I am a bit careless in reports but only noticed amazon navigation at Easter... and I was distracted and busy... and who says fraud ocp are already probably already aware.)

HRMS - END MISSION

Navigation - HRMS - people - assignment - status
How to end the assignment
When I try the following error -cannot terminate or end a primary state of the assignment will be reset to zero

Hello

Create a subtask, and then form the region chose him (various) form TAB tab, check the primary indicator, and save, go back to the previous assignment to uncheck the main indicator here. Then you can complete the assignment without error message.

Please chose the track date in each of the steps.

Thank you

ORA-12514 connect to analyze the listener
I have two rac nodes datase under linux.

Here's what I got when I try to log in to analyze the listening port of the client. It connects to the vip / or scan of the IPS with no problems.
sqlplus system/password@wxcy

SQL * more: release 10.2.0.3.0 - Production of sea Mar 14 18:42:42 2012

Copyright (c) 1982, 2006, Oracle. All rights reserved.

ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified

But when I connect to the ip address of the listener to scan, it worked:
sqlplus system / [email protected]:1521 / wxcy

SQL * more: release 10.2.0.3.0 - Production of sea Mar 14 18:43:12 2012

Copyright (c) 1982, 2006, Oracle. All rights reserved.

Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.
Options of Data Mining and Real Application Testing

SQL >

Here the tnsnames.ora on the client:

= wxcy
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)
(HOST = scan.com) (PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy)
)
)

Here are the listener.ora and tnsnames.ora on the server:
Listener = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = Listener))) # line added by Agent
LISTENER_SCAN3 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN3))) # line added by Agent
LISTENER_SCAN2 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN2))) # line added by Agent
LISTENER_SCAN1 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN1))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent

SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy_DGMGRL)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
)
)

SID_LIST_LISTENER_SCAN1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
)
)

SID_LIST_LISTENER_SCAN3 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
)
)

INBOUND_CONNECT_TIMEOUT_LISTENER = 120
~

tnsnames.ora:
= wxcy
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy)
)
)

wxcy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy_DGMGRL)
)
)

wxcy1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED) (SERVICE_NAME = wxcy)
(INSTANCE_NAME = wxcy1)
)
)

wxcy2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED) (SERVICE_NAME = wxcy)
(INSTANCE_NAME = wxcy2)
)
)

Node 2:
LISTENER_SCAN2 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN2))) # line added by Agent
LISTENER_SCAN3 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN3))) # line added by Agent
Listener = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = Listener))) # line added by Agent
LISTENER_SCAN1 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN1))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3 = ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2 = ON # line added by Agent

SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy_DGMGRL)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
)
)

SID_LIST_LISTENER_SCAN2 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy2)
)
)

SID_LIST_LISTENER_SCAN3 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy2)
)
)

I wonder why I can connect to the IP addresses of people scan headphone but not the name of the scan.

Thank you.
Here the tnsnames.ora on the client:

= wxcy
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)
(HOST = scan.com) (PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy)
)
)

incorrect syntax (support useless inside, where the entrance is not analyzed)
```
wxcy =
 (DESCRIPTION =
   (ADDRESS_LIST =
     (ADDRESS = (PROTOCOL = TCP)(Host = scan.com)(Port = 1521))
   )
 (CONNECT_DATA =
   (SERVICE_NAME = wxcy)
 )
)
```

People scan status

Similar Questions

Maybe you are looking for