PERC 5i SAS internal Raid pre-installation drivers

Similar Questions

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• pre installation of software drivers/OSX

  I am replacing a C410a all-in-one

  with a HP 8620 on MAC OSX 10.10.1 (not listed down to the bottom)

  I have not yet received the 8620

  I was thinking of driver software pre-installation and nothing else than installing the software

  any of you recommend it?

  also;

  Recently, I got nothing else that issues with a correct reinstallation of the C410a (I uninstalled and reinstalled according to the instructions from HP

  Now I confused my MAC with this new facility?

  everything worked very well until Yosenomite was released.

  a call to Apple support has helped a bit but not completely

  I refused to call HP support and pay them because I can never understand the technical support

  in this case, it will be different because it will be a new product.

  So I guess my question is, should I pre install anything? I'm sure the installation disc does NOT include the installation of OSX, and I'll have to download from the HP site. I also have Windows Vista, but have no problems with the initial installation on this OS

  Thanks, Bob (eickides)

  Robert Eick

  Hello @eickides,

  Welcome to the Forums of HP Support!

  I would like to help you with your installation questions and problems you're having with your computer Mac OS X 10.10 today.

  The HP Officejet Pro 8620 e-all-in-one printer that you'll be buying and using a computer Mac OS X 10.10 is now completely cared for and functional operating system. There is absolutely no reason why you can't go ahead and preinstall the device Drivers and software for this printer on your Mac to get everything prepared and ready for when you actually get your printer.

  If you want to download your printer drivers, please click here and simply select the "download" button in the upper left corner of the page. You can complete the whole installation. However, at the end installation, you will be prompted to "Add" your printer to your folder of printing & scanning. Of course this is not possible until you actually have the printer, so just close that box. Once you get the printer and all up you can easily add in the Mac. If you have problems with who simply join the HP Support Forums of step by step quick assistance.

  With regard to your HP Photosmart Premium Fax e-all-in-one printer on your Mac OS X 10.10 HP C410a doesn't have a comprehensive set of features and software download. Therefore, you rely solely on Apple updates to load this basic generic in driver package. In no case this generic Apple package will interfere with your HP Officejet 8620. Therefore, if you want assistance with loading C410a C410a on your Mac, please follow the steps below:

  Step 1: Uninstall the drivers and software:

  Please unplug your USB cable from your C410a before continuing.

  To ensure that we have a nice clean slate to work with during the installation of the driver correctly for your C410a please click here and through the supplied instructions to uninstall. When the page opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' that the steps are identical for Mac OS X 10.10. Please run the two method: reset the printing system, and second method: uninstall the printer software.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Please plug in your USB cable now.
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Add your printer:
  

  1. click on the menu Apple and then click on System Preferences.

  2. Select Print & Scan

  3. check if the name of your printer appears in the list of Printers .

  4. carry out the following operations, according to you whether or not the printer is listed:

  • If your printer is listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the sign minus (), then remove the printer. Once the printer is deleted, click the plus sign (), click Add a printer or a Scanner, click the name of your printer
  • If your printer is not listed, click the sign plus (), click Add a printer or a Scanner, click the name of your printer

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu.

  6. click Add to add the printer to the list.

  7. close Print & Scan

  Now, try to print.

  Please let me know if the information I have provided fixes your driver issues and if the steps I provided helped to reinstall your C410a. I look forward to hear from your part. happy new year!

• Program compatibility cannot download antivirus Avira - Avira Pre installation download program block him

  I try in vain to download the free Avira antivirus program - it blocks every time on Avira Pre installation (not compatible)

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  

  http://support.Microsoft.com/common/international.aspx

• Node simple database pre-installation checks running for 2 hours.

  Not having my first install Oracle EBS on a concert of 16 16 VM drivers, due to the lack of sufficient space on file system, I added a new 900 GB virtual drive and rose to /d01 with lots of reading permanent writing on a BONE 7 OEL.

  Failed to install previous pre-installation check relatively quickly (10 minutes or more), but this control of pre-installation worked for 2 hours now, with no updates.

  ---------------------------

  .........

  Mid-range host ping was successful

  command: / bin/ping - c 1 host - 1.skytap.example.

  PING host - 1.skytap.example (127.0.0.1) 56 (84) bytes of data.

  64 bytes of the host - 1.skytap.example (127.0.0.1): icmp_seq = 1 ttl = 64 time = 0.062 ms

  -Home - 1.skytap.example - ping statistics--

  1 packets transmitted, received 1, 0% packet loss, time 0ms s

  RTT min/avg/max/leg = 0.062/0.062/0.062/0.000 ms

  Mid-range host domain Ping was successful

  Check complete.

  Checks of preinstallation of database

  These controls may take a few minutes...

  --------------------------------------

  The computer is allocate mem and CPU for the gnome, java and the Xorg process, but I expect to see an update now.

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  What is a 12.2 installation? If so, you should find the details on doing RapidWiz in $TMP //in the .log file - Rapid troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Cisco C240-M4SX / 12G SAS Embedded Raid Controller Queue depth Reporting resulting in ESXi 6.0

  All,

  We have been a customer of vSAN VMware 6.0 for the last 6 months of our environment entirely on servers of Cisco C240 M4SX with the Cisco 12 G SAS integrated Raid Controller.   Everything in the environment was working well until we started to bring in data warehouse loads in the environment and began to notice performance around latency of disk and most important issues still outstanding IO high.  After that ESXtop and ESXCFG examination we found that the length of the queue announced to the adapter ESXi has been only 234 however the VMware HCL Announces 895; 234 is below minimum spec of 256 to correctly implement vSAN.  We have worked diligently with VMware on it to try different versions certified and non certified driver async for this raid controller in addition to the most recent firmware for the raid controller.  Regardless of the change of the depth of the queue remained 234.  The presence of FBWC affect the depth of queue announced to the operating system?  VMware support has indicated that it is clearly a problem "hardware".  Any ideas as to what may be causing this?

  Our environment:

  C240-M4SX

  Integrated 12G SAS Raid Controller (operation JBOD / pass-through, not FBWC)

  UCSM 2.2 (6 c)

  Driver of VMware for controller: 6.606.06.00 - 1OEM.550.0.0.1331820.x86_64.vib

  VMware vSphere 6.0U1

  12 - 28-2015_5-51 - 31_pm.png

  

  12 - 28-2015_5-56 - 51_pm.png

  

  Greetings.

  Had the chance to spend some time in the laboratory and removed the cache module.

  After that, I now get "207", so I would say it's confirmed that 1,2,4 GB cache modules are used to increase the depth/length of the queue for these controllers.

  12gb_sas_qdepth_no_cache.jpg

  

  Thank you

  Kirk

• EBS Version 12.2 CUP5 - patches of pre-installation

  Hi people,

  I'm upgrading my current version of BSE 12.1.3 to 12.2.4 referring, "Upgrade Guide reference no.. E48839-02".»

  I did ' apply AD 12.2 update driver (required) "stage which is on page #"3-4 Oracle E-Business Suite Guide upgrade.

  Now I'm going to "apply all the patches (cups) consolidated upgrade (required)" according to guide.

  I followed the DOC ID: 1448102.2.

  According to the MOS DOC, I downloaded "EBS_R12.2_Preinstall_2015_Jun_19.zip". This shows a number of patches that I need to apply with patch 18007406, mode of pre-install.

  I ran the following query on my machine, which shows that most of the products is at the level of the B.3.

  SELECT app_short_name, MAX (patch_level)

  OF apps.ad_patch_driver_minipks

  GROUP BY app_short_name;

  Output:

  ------

  PSP R12. PSP. B.3

  AS R12.AS. B.3

  FTE R12. FTES. B

  AK R12. AK. B.3

  HVC R12. HVC. B.3

  and so on...

  My question is:

  (1) do I apply all patches listed by the DOC in mode of pre-installation or only patches which the product is currently available in my system?

  (2) Let's say in my system ("PAY"R12 is at .) PAY. B.3, code level). When I download the patch against the product (i-e: 19730774), it shows that the patch is (Compatible with: R12.) PAY. C, R12.HR_PF. (C) and my current level of PAY product code is "R12. PAY. B.3. So I have to jump these patches that are not available for my current level of code?

  Thank you!

  Ali

  To download the patches one by one is going to be a tedious task you better use a download script (Wget for 12.2 clients Upgrade) provided by note 1448102.2 which will download the patches all pre-installation.

  For the line of code 12.2 is C

  Please find Note 1325930.1 what are the codelines? Codelevels?

• Rapidwiz upgrade to R12.2 - Web Server pre-installation verification failed

  Hello people.

  I'm on the right track to improve my EBS 12.1.3 to R12.2. I did all the pre-reqs/patch before the upgrade according to the DOC: Oracle E-Business Suite Upgrade Guide version 12.0 and 12.1 to 12.2 E48839-02 Réf..

  Finally, I run rapidwiz. However, after entering all the required values, when rapidwiz reached the status of control system, after doing several checks he stuck on 'Web server pre-installation check failed ".

  
  

  System check the status showing window continues same message for 2 hours. For more information please see the screenshot below.

  

  Please, let me know where rapidwiz creates log file so that I can investigate the reason to fail. Also, please try to fix this.

  Thank you!

  Ali

  Checksums MD5 for R12.2 Quick Install Media (Doc ID 1505510.1) helped me to solve the mentioned problem.

  Thank you

  Ali Raza Memon

• Database checks pre-installation of warning/error

  I need help, find a solution to the question below.

  Details of control system:

  Checks of preinstallation of database

  These controls may take a few minutes...

  command: cmd.exe /c C:\stage122\startCD\Disk1\rapidwiz\bin\checkOS.cmd

  C:\stage122\startCD\Disk1\rapidwiz > ECHO OFF

  File not found

  File not found

  FINDSTR: Cannot open C:\Users\ADMINI~1\AppData\Local\Temp\2\\

  (all was unexpected at this time.

  RW-50011: error:-test version of the fix/operating system returned an error: 255Database pre-installation checks completed.

  This is the only error I get on install. Let me know if any other information is needed for the resolution.

  I would like to redo the installation of the database-level node and the password apps would be 'apps' default.

  You can share the directory of the scene between the nodes.

  Thank you

  Hussein

• Oracle E-Business Suite patches pre-installation on top of R12.1.1

  We try to identify the patches that are required to be applied on top of R12.1.1 before calling the u6678700.drv. We came across the note, Oracle E-Business Suite Patches Report [Video] [ID 1448102.1] pre-installation. We installed the report and according to the note and the report, we have 'Failed to upgrade Script - EBS' 98 patches and 'Problem of Performance - EBS' 33 patches. We would like to know if its required to apply all of these 33 98 + patches and if yes is there a better way to get a merged fix?
  
  We need to apply fixes for products under a particular family combination if they are not allowed? IE say under Finacials, produced ZX, XLE are not allowed, so can I ignore patches preinstallation for these products?
  
  Thank you

  965417 wrote:
  Given that I'm upgrading to R12.1.3 I can skip these three patches that I think, pls correct me if I'm wrong.

  Thank you

  Fix. If you are looking for patches individually in the site Web of MOS, you will find that they are included in 12.1.3 ORS

  Thank you
  Hussein

• Suggestions of Internal RAID card for config

  Hi people,

  First a brief summary of my hardware that may contribute to the discussion:

  MB: Asus P9X79-E WS

  CPU: Intel Core i7 Extreme 4930 K 3.4 GHz

  SDS OS: Samsung 840 series Pro 256 GB

  Various HD WD Black

  Case: Obsidian 900 d

  I would like to put in place a system of internal Raid that the case has a lot of Bay HD capabilities. MB Raid facilities on board are not too reliable, or so I read, so a PCIe card seems the best bet.

  Can someone please offer advice on what card PCIe is more suitable for this purpose. I would look at Raid 10 with 4 x Sata disks 4TB

  Kinder,.

  Lyndon

  Page of tweakers - Raid or no Raid

• Pre-installation requirements

  When it comes to install the Oracle database, there are two flavors is in function, another interface based graphic/YES command.
  
  The Oracle pre-installation guide requires some activities to do before installation, activities such as the creation of certain directories, setting permissions and rules and others. If I use the program YES, program YES automatically create the necessary directories as basis, at home and the inventory directories, set the permission, create rules files and other things for me? OR I still need to manually fill these actions without worrying?
  
  
  Thank you
  
  Scott

  PL complete the manual steps required before calling the YES or the command line installer

  http://docs.Oracle.com/CD/E11882_01/install.112/e24321/pre_install.htm#BABFDGHJ

  HTH
  Srini

• Error occurs when applying the patch 9239089 pre-installation tasks

  Error occurs when the application of pre-installation tasks of patch 9239089
  
  ----------------------------------Pre-install Tasks--------------------------------------
  4. use SQL * more to run the script:
  
  UNIX:
  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql < name of the APPS schema >
  
  ----------------------------------error message---------------------------------------
  
  End of creation of Package PL/SQL AD_DBMS_METADATA.
  
  DECLARE
  *
  ERROR on line 1:
  ORA-20000: ORA-00933: SQL command not properly endedError in
  ad_grants. Give_grants
  ORA-06512: at line 685
  
  
  
  Validation complete.
  
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  Thank you
  Jackie

  Jackie,

  $ sqlplus/nolog
  SQL > @$ORACLE_HOME/appsutil/admin/adgrants.sql

  You must run the script as follows (replace with apps):

  SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql apps
  

  Thank you
  Hussein

• GR 11, 2 pre Installation fixed

  Hello
  
  Just a quick question, I have already installed oracle 11 GR 2 on linux distributions that are not officially supported as ubuntu.
  
  I have installed OEL 5.5 recenty and I was just wondering if I could install GR 11, 2 in unpacking simply by running YES?
  
  as apose to fixes as follows for ubuntu:
  
  http://www.Pythian.com/news/13291/installing-Oracle-11gr2-Enterprise-Edition-on-Ubuntu-10-04-lucid-Lynx/
  
  or do I need a similar process when installing on oel?
  
  see you soon

  As long as you meet all the pre-installation requirements described in the Installation Guide, you should be good

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/pre_install.htm#BABFDGHJ

  HTH
  Srini

• H200A PERC. SAS and SATA. Simple 2 extra HARD drives raid. Possible?

  Hello.
   
  Research in the server rack dell R210 II.
   
  Added records 2 x 300 GB SAS with a PERC H200A raid controller.
  The other two empty drive bays im looking to transfer courses two SATA 2.5 "HARD disk drives. Ive read you can mix SATA and SAS drives, is this true?
   
   
  I have two options to the raid configuration:
   
  the raid controller would be able to support two raid 1 RAID. 1 for the SAS drives and the other for the two SATA drives?   Operating system can see two disks.
   
  He would support a raid 1 for hard 1 & 2 discs.  Then with disk HARD 3 & 4 show the HARD drive directly on the server.  OS sees thre readers.  The drive in question and two others.
   
   
  I tried the dell chat, but could not get anywhere, as the helpdesk agent does not seem to know that you can google some caddy and buy the caddy to adapt to discs with no carts.

  [murmur] I'm wrong :), but I think the H200 supported not RAID, so if left unconfigured, the disks will be seen by the operating system as the person/no RAID disks.  Also, if I am wrong not :), the H200 supports a maximum of 2 virtual drives, so would not work two 1-disk RAID 0 and a RAID 1 (in fact, it probably won't allow you to create a single drive RAID 0 in all). [/whisper]

  http://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/PowerEdge-RC-h200_User ' s%20Guide_en-us.pdf

  Sorry... I love you pc :)