Suggestions of Internal RAID card for config

Similar Questions

• RAID Perc 6 / I card for Workstation T7400

  I'm looking for a recommendation/part # for a good Perc 6 / I Raid card for my Dell T7400.

  T774H is quite useless without battery data cable to go with it.

  6i Raid Battery Cable - JC881

  FR463 Battery for PERC 6i

  http://www.Amazon.com/Deconn-internal-SFF-8484-SFF-8482-finger/DP/B011UMCMW0

  http://www.eBay.com/ITM/Dell-server-RAID-PERC-6i-PCI-4-drops-cable-T610-T7500-T7400-T5500-T5400-SC1430-/181156923215

  

• sim card international iPhone 5S for europe

  I will be going to Spain.  How can I buy and use international sim card for the use of the data

  You will need to ask your operator. Probably, you would hold just the SIM card you have and then enable data roaming if your carrier offers it, but they are the ones to talk to.

• Suggestions for a RAID card

  Header 1

  Currently I have an Adaptec RAID 3405 card, it is about five years old and about two of every three boot-ups, he negotiated one of the disks at half speed, i.e. 1.5Gps. To mitigate the problem, I've done as a "hot spare" HD Having replaced the cable without result maybe it's time to get a new card.  I want to do is get a RAID card allowing five internal hard drives (2 TB) and for future expansion also a SAS /... external connector.  Currently, there are three sets of external drive connected via eSATA and Sil3132 SATALink Controller. Latter is configured through external enclosures in RAID 5 and RAID0 respectively, so there is a single HD via the eSATA port. The system is of recent construction with an i7 950 and 24 GB of RAM. "' 'C' (System) drive is Raptor 10 K rpm WD, the" D "drive is a 1.5 to 7200 RPM, the 'G' disc is consists of four HDs Seagate 2 TB 7200 RPM drive 'I' is a Kingston SSD 128 GB which is used for caching. More combinations of external drive mentioned above.  In addition to change/upgrade the RAID card, I would get a late model SSD to replace my existing 'C' drive and use it to replace the existing "D".  Looking forward to your suggestions. See you soon,. Michael

  HI Mike,.

  We recommend to not to fill readers beyond 65%, depending on the performance degrades quickly at this point (beside SSD)

  I don't know that prejudice will agree.

  Intel Raid RS2BL080

  And then there is this one which is newer RS25DB080, but now you get up in the price of the Areca.

  Best software of management of each of them.

  Atto is the only other that we love.

  Nothing wrong with Areca.

  In all honesty I haven't used a LSI in 2 years and more. At one point they were my fav as comparable to those of other performance

  Even cheaper. We had some problems with them some time ago and stopped using their... also support was easy to get ahold of and well informed.

  Really, I don't know what the problem was with them...

  Scott

• Looking for the number of right-hand side of a built-in raid card of R415 H700

  Hello

  I have a server with a RAID card integrated S300 R415 and I'm looking for:

  Dell PERC H700 integrated RAID controller

  to install in the integrated RAID controller connector. I don't want to use the PCI-E slot card just above a RAID card because I need for Ethernet. I like the 1 GB if possible but I think they devised only integrated map of H700 with 512 MB.

  When I search RAID controller internal Dell PERC H700, I get a lot of results, but could not get an exact match for a server R415. I'm afraid that if I get homesick, she is not right. Please let know us on the H700 onboard correct for a R415.

  Unfortunately, the only card that can go in the built-in storage location is a modular 6ir SAS or a modular S300, which you already have. The SAS 6IR has no cache and only supports raid levels 0 and 1 (no raid 5). To go with a H700, you must remove the current Ethernet card, you have to slot 1.

  http://www.Dell.com/downloads/global/products/Misc/r415_tech_guide_11_18_10_final.PDF

  page 38

• Try to reinstall Windows Server 2008, but get a message that I need to install the driver for the raid card.

  LaCie 5big Network 2 10 TB Network Attached Storage

  I'm going to re install OS windows storage server 2008 standard but system require raid driver card,

  What is driver on raid card.

  Hello ChatJen,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
   
  Thank you

• I can't spend S370 because RAID Firrmware update is necessary, but this is not for my RAID card

  Hi guys.

  When I have never upgraded my Ironport Web Security Appliance for AsyncOS 7.7.0 S370 build 761 upgrade, for example, he said thar RAID Firmware update is needed for this, but if I try to update the firmware, the system told me that this is not for my RAID card

  What can I do?

  It is the result of the cli for upgrades:

  "

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .....

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 5

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Not applicable to your RAID card upgrade
  Facility upgrade is complete.

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .......

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 4

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Stale lockfile deletion

  Note: A new firmware is required for your RAID controller before you can upgrade to the version selected AsyncOS. This update should be canceled. First please update the firmware by running a new update and selecting "update the RAID controller firmware (for S360/S370/S660/S670 only required restart).

  Please see the release notes on http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html for more details on the update of the firmware.

  The upgrade of the system has failed. This could be the result of a network interruption or a bigger mistake.  If the problem persists,
  Please contact customer support.
  SFPPRXY1P.intranet.Cajastur.es >

  "

  Thank you

  Regarding issue 1: it could be this new firmware is already installed.

  Look at page 3 of the release notes (http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/RAID _...)

  After running the update of the firmware, the firmware upgrade package appears in the list of available upgrades even after a successful installation. The presence of this package does not indicate a failure of the upgrade.
   
  8
  To verify that the upgrade is running correctly, you can run the upgrade script again after the machine has restarted. If the upgrade was successful, the upgrade script indicates that the device does not require the upgrade
   
  Regarding your second question: the software upgrade:
  -you have an internet connection for update servers (the upstream proxy settings check maybe..)
  -What is your version of the software running (did you check upgrade)? Maybe you should first upgrade to 753 or some other version...
  -Maybe the reboot will solve the problem?
   

• Can you suggest that we use the graphic card for my office?

  Original title: graphics card

  Resected Madam/Sir,

  Greeting of the day!

  can you suggest that we use the graphic card for my office.

  my desktop configuration

  RAM: 2 GB STROTINUM

  MOTHERBOARD: GA-G31M-ES2L-DDR-800/REV.2

  PROCESSOR: Intel (r) PENTIUM (R) 4 CPU clocked at 2.66 GHz 2.67 GHz

  SUSTEYM OF OPERATION: 32-BIT WINDOWS 7

  I'm studding 3d max or Architectural programmed.

  Please suggest me with retail prices where to buy the graphics card.

  Hi John,
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I suggest you to use your favorite search engine to find the details of the graphics that suit your needs.
   
   
  In addition, you can contact the store nearest computer hardware for more information.
   
  I hope that the information above helps you.

• need to replace my number of credit card for the monthly payment. What they suggest to do, does not take me anywhere. Is there any phone number to call to expedite this update?

  I need to replace my number of credit card for the monthly payment. What they suggest to do the update your credit card number does not take me anywhere. You is any phone number to call to speed this up?

  Francosp

  Ensure that EACH DETAIL is the same in all places, you enter your information

  -in how to spell and punctuate the parts of your name and address

  Change/Verify account https://forums.adobe.com/thread/1465499 can help

  - Https://helpx.adobe.com/utilities/credit-card.html credit card

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• How to install the driver for a Raid card.

  I hope that this question is of you and yours.

  I have:

  ESXi 4.1 operational on a Dell 1950. He has a basic raid card that works. This is the functioning and VM are stored.

  I installed a 1212 4 Areca Raid port cards. I have attached two Intel SSD's in raid 1.

  My Bios sees both the original and the 1212 raid cards and disks.

  Areca at startup utility says that everything is swell.

  ESXi is unable to see the 1212. I went to the Areca website and downloaded the driver for ESXi 4.X.

  I followed the instructions for all upward using the CLI interface. He begins to apply the patch, but then I thought that a meta.zip file is missing and things are abandoned.

  I went to the site of vmWare and downloaded their solution. Once again using the interface CLI things start to download but then I thought that there was no update occurred or the boot. Nothing to do.

  Here is the link to the drivers of the Areca. The installation instructions are great, but for the meta.zip file.

  FTP://FTP.areca.com.tw/RaidCards/AP_Drivers/VMware/ESXi_4/

  Any ideas? Thanks for help.

  John Ullom

  I had a similar problem with the Areca 1222 (version 8 ports of yours).

  I was able to fix by changing the zip file of Areca. In the folder while offline connection-bundle, you will find some arcmsr ARC - 1.20.00.15.vmk.100202 - offline_bundle - 262812.zip. Inside that zip you will find metadata.zip. Inside of this zip, look for vmware.xml. Modify the file as follows:

  Find the following text:

  You should now be able to install the CLI.

• RAID and TRIM Config for R720xd and SSD

  Hello

  I have:

  • Dell Poweredge R720xd
  • 4 x 800 GB Dell Intel brand SSD S3700 DC
  • 8 x 600 GB Dell brand Savvio 10K.6 hard drives 2.5 "
  • Reference Dell PERC H710P Mono Mini

  I would like to configure the server with a RAID 5 array to another array of RAID 5 for hard drives and SSDS.

  On the SSD, I read that:

  1. The H710P does not pass through TRIM/cancel orders the OS MAPPING
  2. TRIM is not really necessary because the RAID controller has a method to warn the reader that the block is unused
  3. A small percentage of the SSD (~ 5%) should be neglected.  In my view, that it is more provisioning.

  (3) above is really necessary when it comes to RAID with SSDS?  If so, how to achieve this?  Make:

  allocate some 95% of the available SSD space only when you create the RAID volume?

  OR

  devote 100% of the available disk space on the RAID volume and then when I create partitions during the OS installation, leave unallocated 5%?

  Hello

  None of this is important. Questions that concern you have no effect on your configuration.

  jfly

  • The H710P does not pass through TRIM/cancel orders the OS MAPPING
  • TRIM is not really necessary because the RAID controller has a method to warn the reader that the block is unused

  When you use a controller hardware RAID of the operating system has no control on the blocks. The operating system thinks that they control all blocks are virtual, so any TRIM/UMAP makes the BONE's virtual blocks.

  jfly

  A small percentage of the SSD (~ 5%) should be neglected.  In my view, that it is more provisioning.

  During the introduction of reach a level of training. SSD manufacturers allocate space for it. If you want to make additional supply, some drive manufacturers provide utilities to allow you to manipulate the supply, or you can just have unallocated space on the disk. All unallocated space will automatically be used by the reader, but I don't see a need for this SSD is already provided by the manufacturer.

  Thank you

• Internal RAID leads to possible Xserve when using ESXi 5.1?

  Does anyone know if there is a way to RAID the internal on a 3.1 Xserve drives when it runs as a host ESXi 5.1?

  I'm looking to do a raid mirrored for redundancy.  Ideally, software RAID would be great, but I'm willing to use a hardware RAID card too, if that's what it takes.  Looks like the Apple for the Xserve RAID card is not supported.

  Thanks for your suggestions!

  -John

  So yes, with no possibility of a supported card and no possibility to software RAID (ESXi does not that), then you are for the most part without options, unless you do some hackery as giving the discs directly to a computer virtual (not technically supported with SATA drives, but possible), using software RAID in the VM and looping while editing of ESXi.

• Help Setup RAID SATA for ESXi 4.1

  Hello

  It is the first time that you try to use vmware.  Any help is greatly appreciate!

  I just built a server around the Intel s5500hcvr mother. I have 6 SATA HDD I want to set up in a RAID. The integrated RAID controller seems to be very limited and does not seem to be supported by ESXi 4.1 (when I run ESXi 4.1 installation and it asks for a location for installation, all my discs are individually listed instead of virtual drives that I created with the RAID controller)

  My questions:

  (1) what is the suggested configuration of HDD (RAID levels / number of berries) for ESXi 4.1?  Can I create 1 RAID 10 array and set everything up to that?  or take one of my disks and install esxi 4.1 on it and then create a RAID with the rest of my discs and use it to store data?

  (2) anyone can provide links to some SATA RAID controllers that are known to work with ESXi 4.1 (and is the supposed to recognize virtual readers created by the RAID controller setup ESXi 4.1)

  Your motherboard has a RAID controller software which, as you have discovered, is completely not taken in charge by ESX/ESXi... You will need to get a RAID controller that is on the HCL for SAS and SATA hard drives (not one with battery backup write cache) so you can use any type of RAID configuration.

  My preference for Internal RAID configurations (on the host) are two drives mirrored for ESX/ESXi to reside (preferably being SAS 10 k or 15 k RPM, 73 GB or 146 GB in size) and then another table for the data store. You'll want to keep the data slot store table 2 TB-512 b size in order to present to ESX/ESXi as a LUN. Or you will need to get a RAID card this split of the support to the top of the table in the smaller of the virtual drives that can be presented for ESX/ESXi and LUNS.

  Search for controllers using the LSI MegaRAID chip as a good first lap. Some Adaptec cards should work, but I've seen people post questions on those recent (more recent than in the past). MANY manufacturers rebrand/efficiency the LSI MegaRAID Controllers server, such as the Dell PERC 6 series cards.

  For the use of 4 disks SATA, RAID 10 (on a BBWC, fully supported, controller) will give you the best performance. It will compare with SAS drives however. IF you do not plan on any virtual machine running with anything beyond light IOPS / s then you should be ok (or with very light loads)... If this is going to be a production server, then get the SAS drives all around.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Internal Ricoh card reader of W700 XP x 64

  I am very pleased that lenovo has finally decided to release Windows XP x 64 drivers. However, the drivers for the internal SD Ricoh card reader do not work on my W700 (2757CTO). When I insert an SD card into the reader, the LED lights but no drive does appear in 'My Computer' or 'Management\Disk computer management. " The driver installation went well and allowed also Ricoh three controllers (Memory Stick, SD/MMC, xD-Picture Card) for Device Manager. The Panel "Add or remove programs" lists a "ver.3.58.01 R5U8xx RICOH Media Driver' that this is supposed to be. I tested on a XP minimum 64 over x and the same SD card works fine in other two readers of cards (USB and ExpressCard). I also have Vista, x 64, and 7 x 64 on the same computer and the drive works properly under the two BONES. Any suggestions?

  Thank you

  I found a solution myself. The problem is not caused by the Ricoh/Lenovo drivers but by the Microsoft SD Bus driver, which does not support the SDHC. There is a hotfix for x 86 XP provided by MS (KB934428). For x 64 However there is only a non-official source:

  http://thehotfixshare.NET/Board/index.php?AutoCom=downloads&ShowFile=9395

  The x 64 new driver is Microsoft as well and I don't know why they don't officially offer it on their own site. At least, after you install this fix my card reader SD working properly.

• HP15 portable g019wm - cannot get the internal wireless card installed

  Like many other Windows 8.1 users, I don't like the operating system.  I tried to go back to windows 7 64 bit.  So far, I have everything works except the internal wireless card.  I downloaded and installed several of the drivers wireless youall suggested in similar issues of forum, but all without success.  Can you help me?  Also is there a way to locate all models and manufacturers of the equipment in my laptop?  This is so that I could keep the laptop updated with the latest drivers.

  FYI: for now, I'm running with TPLINK wireless and that the seller has provided dongle.

  PRODUCT: F9H60UA

  MODEL: 15-G019WM

  What is the brand and model of the card wireless installed?

  I will move this thread to the secction of laptop for you.