Percent sign

Similar Questions

• Format of column with the percent sign (%)

  Y at - it shaped the column put percent signs (%)?
  
  Currently, one of the fields in the report shows a number, for example "3.75", but we must add the percent (%) sign, for example "3.75%".
  
  I found the following:
  * To view '$5 234,10', I use "FML999G999G999G999G990D00", these formats with a dollar sign ($) and two decimal places.
  * To display "-5,234.10", I can use "S999G999G999G999G990D00", these formats with the sign (+) or (-) and two decimal places.
  
  However, I can't find how to add the percent (%) sign...
  
  -Frank

  Hello

  You can specify a normal number format, and then in the Expression of HTML (in the attributes column) you enter in the ex #COLUMN #%

  Kind regards
  Dimitri
  ----------------------------------
  http://dgielis.blogspot.com/
  http://www.apex-evangelists.com/
  http://www.apexblogs.info/

• using strings with percent sign

  I have a long text string that gets parsed as I create custom controls.  The question that I have is to have a percentage in this text string and flags sign is to jump.

  First of all, I doubled the percentage sign who took my first error an unknown specifier.  Now, I'm getting it again, but later in my code.

  String = "ringchoose 1 = Variable check 1-Var, Var 2 = 2, Var 3 = 3; ring: Variable Type compare-char = 1, = 2 int, float/double = 3, chain = 4; the value Format specifier: using %%d used if this value is returned in the string. See Help)-% v; ringoperation-less = 1, equal to = 2, Greater Than = 3, not equal to = 4; "value: value to compare.

  string_args = malloc(strlen(string_arguments)+1);                                  sprintf(string_args,string_arguments); //errored here first time                                        token = strtok(string_args,";");
  while (token != NULL) {                                           item_list=0;                                          arg_token = realloc(arg_token,strlen(token)+1);
                                              sprintf(arg_token,token);   //error here now
                                                          arg_ptr = strtok(arg_token,":");                                            if (strstr(arg_ptr,"ring") != NULL) {                                               arg_ptr = strtok(NULL,"-"); //should now hold title of ring                                             controlIDs[i] = NewCtrl(funcHandle,CTRL_RING,arg_ptr,50*(i+1)+offset,40);                                               SetCtrlAttribute(funcHandle,controlIDs[i],ATTR_WIDTH,200);
                                                  while (arg_ptr != NULL) {
                                                      arg_ptr = strtok(NULL,"=");
                                                      if ((arg_ptr == NULL) || (strchr(arg_ptr,';') != NULL)) break;
                                                      value = atoi(strtok(NULL,",\0")); //holds value
                                              InsertListItem(funcHandle,controlIDs[i],-1,arg_ptr,value);
                                                                  if (arg_ptr[0] == '*') {
                                                          GetNumListItems(funcHandle,controlIDs[i],&item_list);   //holds index-1 to set active
                                                      }
                                                  }
  }
  //Rest of if/elses not supplied  since I know looping works
  
  i++;
                                              sprintf(string_args,string_arguments);  //resets tokening
                                              token = strtok(string_args,";");
                                              for (int j = 0; j < i; j++) {
                                                  token = strtok(NULL,";");
                                              }
  

  It's almost as if the extra percentage signs stripped the first time and the second time I did of this chain, they mistake.

  In the example that you have posted, it seems that you could use strcpy() instead of the sprintf() function. strcpy() would not seek to interpret the content of the string in the same way.

  JR

• Remove the value percent sign

  Hello
  
  I try to import a csv file, but 1 field includes a % sign. I want to delete it. How do I that?
  Is it possible to do it with a REPLACEMENT declaration?
  
  Kind regards
  
  Osman

  SQL> select replace('10%','%') from dual;
  
  REPLACE('10%','%')
  ------------------
  10
  
  SQL> 
  

• Percent signs turns into HTML

  I'm trying to load html into a text box on a Web site. When I load the text box, everything's fine, except that it is loaded as something that looks like this:

  "% 20Cheese % 20Croissant = & nbsp % 3B % 3Cimg % 20src = % 22http % 3A % 2F % 2Fwww % 2Ehousing % 2Eumich % 2Eedu % 2Fd ining % 2Fmenus % 2Fm % 2Dfit % 2Egif % 22% 20alt % 3D % 22% 2A % 22% 3F %3 C % 2Fdiv % 3F % 3Cdiv % 20class % 3D % 22Desse 22% 3EOat % 20Bran % rts... »

  I wouldn't mind if the html tags have been there, because I can deal with those, but I don't know what to do with this. Here is my charger:

  var my_lv:LoadVars = new LoadVars();
  my_lv. OnLoad = function(success:Boolean)
  {
  var mL:String = String (my_lv);
  mc.mealList.htmlText = reformat (mL);
  trace (ml);
  mc.mealList._height = mc.mealList.textHeight;
  mc.mealList.setTextFormat (foodFeedFormat);
  mealTween = new Tween (mc.mealList, "FLF", None.easeOut, 300, (mc.mealList._height *-1), (0.05 * mc.mealList._height), true ");
  mealTween.looping = true;
  };
  my_lv. Load (website);
  

  If you think that more data are sent that is presented in your textfield find the code that causes the truncation of data by using the trace() function and possibly the string flash methods.

  However, it is a separate issue.  This thread has answered.

• Percentage not displaying sign not well defined in the view model

  Ihave implemented the model of display as follows:

  999%

  Displays the value 100 without the percent sign. What should I do?

  Thank you

  MDawn

  Try this in the view model of the digital field on your form...

  {num{zz9.zz'%'}

  Thank you

  Srini

• Result in calculation display with percentage sign

  I'm using FormCalc to sum a column of

  values of drop-down lists, and then multiply the number of points divided by 100 times. The calculation works fine, but I'd like a percent sign (%) to appear in the field where calculation is after the calculated number. The number appeared, I just can't figure out how to get the percentage symbol to display.

  Thank you

  MDawn

  Hello

  You can set it in the object > field tab, by selecting models.

  In the view tab, select the percentage.

  If you want to define the number of digits after the decimal point, then, you can use a general model of number and then add '%' in the braces.

  

  Hope that helps,

  Niall

  ... break...

• Add % sign after figures in the "New calculated item" column in the PivotTable?

  Hello
  
  Table view
  ----------------
  
  A1... Jan1... 10
  A1... jan2... 12
  A1... jan3... 13
  A2... Jan1... 20
  A2... jan2... 24
  A2... jan3... 25
  
  
  
  I need result like...
  
  Jan1... (20/10) * 100%
  jan2... (24/12) * 100%
  jan3... (25/13) * 100%
  
  where... % of the value for jan 1 = (value of a2 / a1 value) * 100%
  
  
  To do this, I used the PivotTable and used a new calculated item for calculating the % value right but I'm not able to add the percent sign after the value.
  Can u please help me add the % sign in the value of the result.
  
  Thank you

  Hmm! only useful! ;-(
  I thought it was the right answer...

• Deleted partition BOOTCAMP capacity entered Recovery HD

  I am facing a weird problem and it is honestly driving me crazy!

  I had a partition bootcamp (80 GB) with Windows 7 installed for a while. Then I tried to delete this partition using Bootcamp Assistant of Apple, but I have encountered an error and was not able to do. So I decided to start in Recovery Mode, formatted the BOOTCAMP partition in the hope that I would be more able to merge with my Macintosh HD one.

  I managed to do it, which means that I then had Macintosh HD on one side and a BOOTCAMP partition go 80 empty on the other.

  However, something was not trying to group them together and for some reason, I now have a capacity of 420 GB displayed on Macintosh HD (same as before), no BOOTCAMP partition remain always displayed and order diskutil list showing me 80 GB for Apple Recovery HD (which correspond to my initial BOOTCAMP capability):

  ~ diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 419,4 GB disk0s2

  3: Apple_Boot Recovery HD 80.5 GB disk0s3

  When I run the option first aid in Apple SSD disk utility, I get the following:

  

  My only wish is to be able to recover my full 500 GB on Macintosh HD for later use bootcamp again and install Windows 10.

  Looking forward to any kind of help,

  Thank you in advance.

  Save all your data, preferably twice and independent from each other. Format the drive and reinstall the OS from scratch and restore your data. Alternatively, if you are comfortable using the command line this syntax comes into play:

  diskutil resizeVolume peripheral [ limits |] MapSize | R | size [numberOfPartitions]

  [part1Format part1Name part1Size part2Format part2Name

  part2Size part3Format part3Name part3Size...] ]

  No destructive resize a volume (partition); You can

  increase or decrease its size. On the other hand, takes no action

  and print some info.

  A size of the limits takes no action, but instead will print the

  target range of valid values for the score, taking into

  conditions account file system and partition from the current map

  as files used and other partitions (buildings) following the

  target.

  A size of mapsize takes no action, but instead will print the

  size of the device disc set covering, as well as the

  map of entire partition size (all partitions less map

  (overhead). The whole-disk device may be larger than the by -.

  competition card if the entire disk device has increased since the party-

  tion map was created. More a whole-disk device is possible

  with some drives (RAID) business systems.

  You can grow a volume (partition) (back) to its maximum size

  possible, provided no new partitions have been created, which

  are in the way, by specifying R for the new size of the volume. You

  must use R instead of trying a value such as

  100% because the latter cannot count fresh generals score card.

  To decrease the size, new partitions may be

  created to fill the recently released space.  To do this, specify

  the numberOfPartitions, format, name, and size settings in

  the same way as the description of triplet for the

  partitionDisk verb.

  Resize a volume that is currently defined as the computer

  Startup disk will invalidate this setting; use the Startup

  Disc Bless or system preferences panel (8) to reset the

  resized volume as the boot disk.

  Device refers to a volume; file system of the volume must be

  logging HFS +.  Valid sizes are a number followed by a capital

  Letter from Tal multiplier or percent sign suffix as described in

  the section SIZES at the end of this page (e.g. 1-5 t, 128 M,

  50%).  Property of the disc is needed.

• syntax of the attributes of waveform channel name

  We build waveforms (waveform data type) of readings of OPC tag. We want to put the ChannelName attribute for the names of tags, but I don't know if maybe it's not valid for a channel name (in particular spaces and percent signs). for exaple:

  "TC_EXA_DIE11_ % OUT" or alternatively "Die 11% Out.

  should I be out white space or signs % of filtering?

  TIA

  lmd2

  Sorry to have disturbed anyone

  thing the easiest was to build it and don't check - no error

  spaces and % are both well

• Is there a simple and quick way of deleting these temporary files?

  To clear my comp. congestion and help speed up my PC, my ISP told me to put temp5 Prefetch and % and Temp in start-run to delete the temporary files. It's a bit long-winded that each group must be deleted separately. Disk Clean up does not get rid of them. Is there a simple and quick way of deleting these temporary files? Thanks Brian

  To clear my comp. congestion and help speed up my PC, my ISP told me to put temp5 Prefetch and % and Temp in start-run to delete the temporary files. It's a bit long-winded that each group must be deleted separately. Disk Clean up does not get rid of them. Is there a simple and quick way of deleting these temporary files? Thanks Brian

  Delete the contents of the prefetch folder will not help speed things up.  In fact, it will probably slow things down.  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/can-i-delete-the-data-in-the-prefetch-folder/c54a8e56-c8cf-451d-a88f-07f06a2f2d54
  I guess temp5% is a typo and you really wanted to say %Temp%.  Percent signs indicate that it is an "environment variable" with the usual value of C:\Documents and Settings\, yourusername\Local Settings\Temp

  The directory specified by %Temp% is, in fact, the directory cleaned by the cleaning of record under the name "temporary files".  Why do you think that disk cleanup is not delete files?  Note that disk cleanup does not remove the files in this directory which came in the last 7 days (this period may be changed by changing a registry value).

  What disk cleanup does NOT, however, is to clean temporary files, files for the Internet browser cache and other files in places of profile-specific to the user of different profiles that you are currently using.  Disk Cleanup also does not delete the contents of C:\Windows\Temp (although it doesn't fill up with very much).  C:\Windows\Temp is the directory that appears when you type Temp in start > run (without the percent sign).  And, of course, disk cleanup will not empty the cache of the browser by non-Microsoft browsers, e.g. Firefox.

  There are third-party applications that make a "deep" cleaning  Some of them clean files of all users without having to login to each profile separately.  Most understand the characteristics that you should not use.

  Here are 2 - there are others, but I haven't used.

  ATF-Cleaner  (do not delete prefetch)
  CCleaner (do not use the registry tool)

  You might be interested in "How to automate the disk cleanup tool in Windows XP"

• Drive not valid error H:

  I have Windows XP Professional SP3 and when I try to install or uninstall an application I get a "Error 1327 - Invalid drive H:".  My system does not drive H:

  What follows is to modify the Windows registry, so be careful.  Please back up the registry first.  The easiest way is to do it using the free program C:\WINDOWS\ERUNT

  Open regedit (start > run > regedit > OK)

  Access
  HKEY_CURRENT_USER folders
  and look in the right pane for any value in the 'Data' field that contains an invalid drive (for example, h).  If a value contains a drive that is not correct for your computer, right-click on the entry and replace the data with the correct information.

  Repeat the above for each of 4 additional registry keys following:

  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell folders
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  Close regedit.

  Note that the data contained in the "User Shell Folders" key normally begin with an "environment variable.  For example, %UserProfile%

  If you go to start > run and enter one of these variables (don't forget the percent signs), a Windows Explorer window should open showing a valid folder.  For example, if you
  Start > run > %UserProfile% > OK
  the Windows Explorer window opens, showing the content of
  C:\Documents and Settings\nom of user (where user_name is the name of your Windows profile)

  Although the GUI of Windows allows you to change some environment variables, I don't think you can change one of those you're likely to find in the registry keys above.  If it turns out that one or more environment variables in one of the registry keys points to an invalid drive, after return with details to learn more.

• I did nothing I know but the % in my taskbar has disappeared.

  My impression is very small and difficult to read.  How can I fix?

  There is no % icon in 'system tray '.
  System tray is referred to in the part of your taskbar at the bottom right.

  I guess you meant the percent sign in the bottom right of the Internet Explorer Web page window.

  If so, right-click on an open area of the menu bar (where are file, editing, display etc.) ... put a chekmark in the status bar.

  If I am wrong in my assumption, I apologize.

• Allow a virtual browser through firewall?

  I recently worked with a virtualized 19 Firefox version, but I'm having a problem allowing it through the Windows Firewall. The problem is that the executable file itself is buried in the C:\Users\%USERNAME%\AppData\Roaming\VOS\Firefox\%Program Files%\Mozilla Firefox\firefox.exe

  In the path above '%Program Files%' refers to a literal location where the directory is surrounded by % and does not refer to the environment variable. I also use AppLocker and he doesn't have a problem with this way, but firewall appears. Actually move or rename this directory is impossible, because this place is indispensable for the virtual fie system works. So, I need a way to pass this path to the firewall without thinking that the actual path is "C:\Users\%USERNAME%\AppData\Roaming\VOS\Firefox\C:\Program Mozilla Firefox Firefox\firefox.exe".
  So far, tried to escape from the % with ^ and doubling the percent as you, without any result. Enclose the path in ' ' did not help, either. I also tried to use the short name of the directory (% Progr ~ 1), hoping that would help. Finally, I also tried to create an environment variable to point to the path and the addition of the rule in this way, without success. When I try to add the rule manually on the local computer (I am also to push those rules to GP) I get an error that the application path cannot be resolved.
  I hope someone has another idea.

  Update: you can feel free to take the virtual browser completely off the problem. The problem is, how do I switch Windows Firewall with security advanced a rule when the path contains percent signs? I'm learning the syntax to inform the Firewall %Program Files% should not be treated as an environment variable.

  Hello
   
   
  Thanks for joining us out on Microsoft Community Forums.
   
   
  The question you have posted is linked to the virtualized version of Firefox 19; Please post your question in this link for assistance.
  http://social.technet.Microsoft.com/forums/en-us/categories/
   
   
  It will be useful.
  Please let us know if you encounter problems with Windows and we will be happy to

• Enter keyboard symbol percentage

  How can I enter a % (percent sign) on the numeric keypad on an all-in-one Deskjet 4645?

  The WiFi network that I am trying to connect to requires a % (percent sign)

  Hello Arthur_B-ZA,

  Welcome to the HP Forums!

  I understand you are trying to enter a percentage symbol when you configure your network wireless using the Deskjet 4645. I will do my best to help you! Unfortunately, you can not press this symbol on your printer. I'll give three methods to connect to this printer:

  You can install this software on your computer, then use HP auto connect wireless:

  1. When you install the software, select the wireless connection
  2. Select Yes, send my wireless to the printer settings , and then click Next .
  3. Follow the on-screen instructions to complete the installation of the software and the printer wireless network.

  You can install the software using a USB cable, and then convert USB wireless:

  1. During the installation of the software, select USB connection
  2. Once the software is finished, follow this document to Convert USB to connect wireless HP

  You can change the password wireless which is compatible with the symbols of printers, and then use the Wireless Setup Wizard.

  Please post your results, I will be looking forward to hear from your part, have a great day!