Perform a boot PXE for MDT 2013 T450S

Similar Questions

• No cos found NIC error starting pxe for ESX 4.0

  Hello

  I am facing the following problem when trying to boot PXE Vmware Vsphere (ESX 4.0). I'm stuck at the error message which said 'no cos NICS found' Please find attached to this screenshot.

  I would like to briefly on what I'm trying to do here:

  I try to perform a boot PXE Vmware Vsphere on Vmware Workstation and have managed to a point, until I get this weird error mentioned above.

  (1) used Vmware Workstation version is 6.5.0

  (2) confg H/W:

  Lenovo T61 laptop computer with processor intel core duo x 86 and virtualization enabled in BIOS

  delivered with 2 physical network cards & wireless and 2 GB of RAM.

  (3) PXE server is running on RHEL5 32 bit platform. I have a DHCP, Kickstart and PXE server to run out of this box. DHCP works perfectly well without any problem but when it is a step for the identification of the host name.

  IP and so forth he said cos NICs not found and I see my dhcp server attempts to assign dynamic IP and it also displays no signal thank you.

  I have PXE starts ESX 3.5 with no problems and it worked like a charm. This is the first time, I ran into problems of this kind. I manually installed ESX 4.0 but it seems no more using the anaconda Installer and

  the installation of the Poles kickstart file created is very discreet and does not contain sufficient information to customize the script is below.

  Please find the entry that I have under the pxelinux.cfg directory on my PXE server:

  label esx4.0

  kernel esx4.0 - vmlinuz

  append initrd = esx4.0 - initrd.img mem = 512 M quiet ks = FTP:///pub/kickstart/ESX4.0.cfg ksdevice = vmnic0

  I'm also willing to share my script to start with you. Please find attached the script below. Kindly let me know how to proceed further. I would be really grateful if you could suggest if any changes to do to my

  startup script.

  See you soon,.

  Kunal

  Post edited by: kkalyanp80

  Post edited by: kkalyanp80

  Double post, please refer to this topic: No cos found NIC error starting pxe for ESX 4.0

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• MDT 2013 Thinkpad Yoga 12 - WinPE boot problems

  We have two models of Thinkpad Yoga and use the same ethernet USB dongle to run MDT and their image with Win 8.1.

  Type 20 c 0 works very well. When we arrived the 20DK of a new type, we had some problems with our image of fat because of the different hardware profile and we weren't using a configuration of total control for drivers on our MDT.

  I created a new MDT installation on a virtual machine and I use the method of total control of the management of drivers by model. I have a profile of selection for winPE and imported the drivers of storage and network for both models (x 64 only, we don't have any x 86). I tried initially the USB3 Ethernet adapter driver I found under downloads for the 20 c model 0 but have tried since the upload of pack pilot SCCM and other I found specifically for the adapter realtek and SCCM, but nothing has changed. The current versions of pilot in my winpe folder are 8.15.0701.2014 and 8.8.0911.2013. Have updated the deployment share, copied the contents of the x 64 folder and copied the litetouchx64.wim in the sources on our USB startup folder and renamed to boot.wim.

  Currently on the 20DK I get the initial screen for MDT spash with blue background, but before any connection charges of screen I get the blue screen of crash with error (ndis.sys) System_thread_exception_not_handled. I guess I do know for sure that it is a problem of network driver but because it fails before the same connection to the deployment share it led me to believe that this was the case. I tried to turn off 3 USB mode in the bios to see if this will have an impact, and he didn't.

  The 20 c 0 still works fine and I was able successfully to the image (from my old wim of fat that I copied from my old server mdt)

  Completed up to add all the drivers for this model in the folder of WinPE drivers and who took care of her.

• Boot Camp for MacBookAir6, 2 drivers?

  I googled download of Boot Camp and the second result is Software Support of Boot Camp 5.1.5621

  I downloaded "BootCamp5.1.5621.zip" and the installation would be no mistake that this facility was not intended for my Mac.

  Where can I download drivers Boot Camp "for" my MacBookAir6, 2 (2013 model)?

  It is pre installed on your Mac.

  Use Boot Camp in/Applications/Utilities

  https://www.Apple.com/support/Bootcamp/getstarted/

• Need a boot disk for Satellite 320CDT

  I need a boot disk for this machine - W98 or W2000. No information about the download location would be useful.

  Thank you

  Hello

  bootdisks are available at www.bootdisk.info

  W95 until images of Windows XP Home edition boot floppies!

  Campino

• Support of NOR-DNET for LabVIEW 2013

  We currently use OR DNET 1.6.6 with LabVIEW 2011. I installed LabVIEW 2013 now also on my computer and tried to synchronize all of the drivers with my installation of LabVIEW 2011.

  Well, it seems that NEITHER-DNET does not support LabVIEW 2013, at least officially. compatibility of Version of LabVIEW and NOR-DNET indicates that NEITHER-DNET 1.6.6 supports 2011 NOR-DNET 1.6.7 2012 LabVIEW and LabVIEW.

  The list NOR system driver November 2013 set OR DNET 1.6.7 defined pilot. When I try to install it, there is no support for LabVIEW 2013.

  My question is, if there is a plan to include support OR DNET for LabVIEW 2013 or later in the game to pilot?

  I copied the directories vi.lib\DeviceNet and vi.lib\nidnet of LabVIEW 2011-2013 and I can load my programs without any problems. I always did not build an executable and does not run on the test set-up, but projects can be loaded in LabVIEW 2013 without any screws of brocken. should I expect any problems running LabVIEW 2013 with the NOR-DNET to 1.6.6 and 1.6.7 driver?

  Nick

  There should not be problems but it is a former pilot, we will not be updated for the future version of labview.

• I have XP and office 2010, I can't upgrade for office 2013 should I buy windows 7

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  Unfortunately, you need windows 7 or higher to run.

  Here are the system requirements:

  http://Office.Microsoft.com/en-us/support/system-requirements-for-Office-2013-and-Office-365-ProPlus-HA102785958.aspx

• Add-in for Excel 2013

  Y at - it an update to Excel Add-in for Office 2013 cover, or 2007/2010 version works just as well?

  We are about to upgrade to Office 2013 and I want to make sure that we don't disappoint our ALM users!  Thank you.

  Hello

  No problem. Sometimes everyone - don't be ashamed.

  Officially, the latest official version does not yet support Microsoft Office 2013. 2010 and 2007 only are officially supported.

  If it is business critical, I would recommend that you keep Office 2010 running on these machines just to be safe.

  On some computers to test, you can try Office 2013 and see if there is compatibility work and expect the official compatility.

  Please, click on the star of white LAURELS (left). This way you'll testify for advice or help you have received. If your problem has been resolved - click on the appropriate button and accept the solution. ***

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I make a boot drive for vista 32 bit?

  I am wanting to do a boot drive for vista Home premium 32-bit. How can I do?

  Ron,

  http://search.yahoo.com/yhs/search;_ylt=A0oGdNojqgROMhoAYzql87UF;_ylc=X1MDUCM5NTgxMDQ2OQRfcgMyBGFvAzEEZnIDYWx0YXZpc3RhBGZyMgNzYnRuBG5fZ3BzAzEEcXVlcnkDaG93IGNhbiBpIG1ha2UgYSBib290IGRpc2sgZm9yIHdpbmRvd3MgdmlzdGEEc2FvAzE-?p=how+can+i+make+a+boot+disk+for+windows+vista&fr=altavista&fr2=sfp&iscqry=

  06/24 / 1108:18: 50 am

• "You don't have the appropriate permissions to perform this action. For more information contact your system administrator. »

  When I go to turn on the UAC through the Windows Security Center, a pop up comes to say "you don't have the appropriate permissions to perform this action.  For more information contact your system administrator. "How can I solve this...

  Also, when I try to run msconfig, I get a saying, "you don't have sufficient privileges to run the System Configuration.  Run this utility as a user in the Administrators group. "How do I that?

  Thank you for your help on this issue.  I tried everything imaginable, but had to reinstall windows vista and to clean the computer.

• Need to boot drive for M8200N

  Need to boot drive for M8200N prod. # GN551AA-ABA. Vista Home Prem starts with only a blinking cursor.

  I pulled the SATA HDD and with an adapter, read/open the hard drive with windows XP.

  Cannot open programs because it is Vista, but can view and copy many files, some I saved my XP HDD.

  HP no longer has the startup disk. I know now that the Boot disk is on the HARD drive (in reading research reports),

  but have no way to make or find its location to create the recovery disk.

  Open to your suggestions!

  Hi dude, demonstration

  According to hp.com, you should be able to recovery disks for your HP (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3548185) product order

  Regarding the screen cursor are you just see a black screen with a blinking white cursor top left?

• No bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics

  I know that many people have posted a thread with this type of problem, but none of them doesn't seem to be exactly like mine. I have a Dell inspiron e1405. I bought probably a year and a half. It works very well almost all the time I got it. The other day I was using it and everything was fine and I shut down normally and the next morning I go to turn it on and I get a black screen with the words 'no bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics' displayed at the top of the screen. I ran diagnostics and it said I had no recognizable hard drive. I ran the vista installation disk and tried to fix it and it wouldn't work. He said there is no disc to repair. I went to just install windows again, hoping he will fix everything that was wrong with my hard drive. When he went to install it says that there is no disc in windows partition. I tried reinstalling the hard disk and no chance. It is reasonable to assume that my hard drive is fried, or is there anything else I could do to try to fix?

  Help, please

  Jason

  jpecha03

  I know that many people have posted a thread with this type of problem, but none of them doesn't seem to be exactly like mine. I have a Dell inspiron e1405. I bought probably a year and a half. It works very well almost all the time I got it. The other day I was using it and everything was fine and I shut down normally and the next morning I go to turn it on and I get a black screen with the words 'no bootable devices strike f1 to retry boot, f2 for Setup utility, press f5 to run onboard diagnostics' displayed at the top of the screen. I ran diagnostics and it said I had no recognizable hard drive. I ran the vista installation disk and tried to fix it and it wouldn't work. He said there is no disc to repair. I went to just install windows again, hoping he will fix everything that was wrong with my hard drive. When he went to install it says that there is no disc in windows partition. I tried reinstalling the hard disk and no chance. It is reasonable to assume that my hard drive is fried, or is there anything else I could do to try to fix?

  Help, please

  Jason

  If you go into the BIOS see the drive listed?  If the list... it could well be the MBR corruption.  Good luck!

• I need a boot drive for a 722C

  I lost my boot drive for a hp722c. Y at - it a part that I could get a replacement?  Thank you

  Hello 2boot.

  Currently, there is nowhere wherever you can get a replacement for the driver CD. You can download the drivers from hp website. From this link, you can select your operating system and download a driver for your computer.

  See you soon!

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/