Period of main menu in blu - ray...

Similar Questions

• How did get this Popup Menu of Blu - Ray?

  Hello

  ??

  Steph

  Not in yet? I think that settles that, because unless you are able to pay one of the more expensive BD creation solutions such as Bluprint, Scenarist BD or DoStudio I see no way to create this type of interaction nested and parametric.

  Mylenium

• Sony Blu - ray HBD - T79 does Streaming Netflix

  Machine is less than a year. Working fine until recently. I can connect to Netflix & select video. When the video starts to load (about 2 seconds), a blue vertical line flashes on the left of the screen & I find myself in the main menu of blu - ray players. Amazon, youtube, hulu, etc. everything still works. I spent over 3 hours with Sony technical support but all they do is move me around & I have to explain the problem to each person over & over & above. After the 3rd call to them they sent me a disc of the M13 Firmware update. R.0491 which I installed it, but it made no difference. I tried all technical support told me to do it several times. I also was on the phone with technical support from Netflix and they could not help either (called twice and spoke to 2 different people). I can still play Netflix on my PC & my laptop (so I don't think that my network is the problem. However, I tried the blu - ray on wireless & wired without result. I want to send the machine to Sony for repair but they claim, there must be a problem with my network (I think it's a problem of software inside the machine). How can I get Sony to take it seriously? My 1 year warranty is about to expire. Thanks in advance for any help you can offer. Tim

  Hello timsrv.

  This question is difficult to determine what is at fault. The problem is all the other work of services except Netflix. If it were all services unit would probably suffer the same problem, if it was the network that any of your devices should be able to access. However the problem lies either individually or with your Netflix account. Nothing has changed since the last time it worked? If it's a software that would change with a status update. A few things you could try must go into your Netflix account on your computer and disable all devices, then re-registration the. You can also try logging of Netflix the your unit and logging and then back with the same account. To do this you have to factory reset it since Netflix since after you back out to the blue line flashes. To factory reset, go to home > reset > reset to factory default settings. If you can not always connect you can try another account to narrow down the question. If you don't have a second account, you can try, you can make one with a free 30-day trial of Netflix and test this.

  If my post answered your question, please mark it as "accept as a Solution.

• Create the menu blu - ray together from scratch

  Hi all

  I downloaded the demo of first elements 11 yesterday and it am assessment for purchase.

  My first project is a blu - ray concert player.  I'm on Windows 7 64 bit.

  The project settings are:

  Square of 720 p AVCHD pixels

  1280 x 720

  29.97 FPS

  offset 30 fps timecode

  I want to create a simple menu for blu - ray (IE a HD menu) which has still a background and simple text buttons.  The top menu would just "concert to play" and "track selection" text-only buttons.  The "track selection" button will lead to a page with all the track names in the form of buttons that point on stage for each track marks.  That's all.

  I don't see that templates pre-installed, and none of them have the designation "HD" in the upper right corner.  How can I make the menu I want to?

  Thanks, Ben

  I'm sorry, Ben. I have no idea why the model doesn't work.

  EDIT:

  I see that you put the text file only in the common directory. Try to create a directory of category (let's call it 'Text' for example) in the common directory and put the text record only in it.

  I just did and the text pattern does just great in version 11. You can even see thumbnail previews of the model in the movie Menus workspace!

• Main menu OSD on my hp pavilion f1703

  Main menu osd blue overlaid with offset menu brightness/contrast in the center of the screen of my hp pavilion f1703 monitor. How can I remove it?

  Hello

  1. no osd main menu appear randomly on the screen?

  2. have you done any software or hardware changes on your computer before this problem?

  The issue may be due to settings on the screen. You can try the steps proposed in the links.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00032234&LC=en&cc=us&DLC=en&product=324213#N1135

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01932183&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=324213

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00032234&LC=en&cc=us&DLC=en&product=324213

  In addition, if the problem persists, you can contact HP support team by mentioning the link. http://h30434.www3.HP.com/

  Check if it helps.

• Glimpses of Blu - ray without fault to the breast However, when I use a Blu - ray player, he jumps in front of the (first reading) main menu automatically.

  Has it to do with the default button or something? Also, how can I configure my movie so that when I hit the stop in the video, he returns to the last menu (or, at the very least, back to the main menu of the disc?)

  I realized the two issues. (Well, at least a compromise).
  With respect to the thing of menu skip: I found the solution simpler was inspired by a reply from my previous post on the forum. his suggestion (for answering system) was to start a menu costs and import the assets concerned when my menu generates kept crashing. Fortunately, when I imported PSD files newly registered to freshly prepared menus, my concerns have been resolved. I think it's to do with the file temp registration mechanism, even if it's just a guess on my part (based on the ideas of others, that generations of rendering of several readers, especially external, can cause problems). Anyway, I did a similar thing with the main menu, and fortunately this seemed to fix the problem.

  The reason why I wanted a stop was to return to the main menu. I realize that account my Blu - ray remote (and I suspect that most, if not all Blu - ray remotes) has a button "Menu of the disc" which dates back to the first game screen. My issue was related to the fact that I created a music video compilation. I made a playlist chapter-by-chapter basis, so that the user can simply hit ' skip/next' and it returns the user to the submenu where they came. I realize, this seems to be a fairly convoluted difficulty, but it was a member of this forum once posted, so I thought I would give it a shot. Cheers, Stan; I appreciate your help without worrying, and I hope that future readers of this thread can use it to help with their project.

  Peace out.

• Satellite P855 - 33 X - Pascal spent the first menu disc drive Blu - Ray

  Hello

  I have a Toshiba Satellite P855 - 33 X. Whenever I try to play a disc Blu - ray (2d or 3d) on the Toshiba Blu - ray disc player, I never spent the first menu (main menu according to disk or the language selection). I'm unable to click on the menu or use the keyboard to select the options in the menu, the bluray is unresponsive.

  It has worked well in the past so I wonder if there was a recent update that could have made this a problem?

  I have Windows 8, recently updated to 8.1.
  Thanks for your help.

  > I have Windows 8, recently updated to 8.1.
  I m wondering if you have updated the Toshiba Blu - ray disc drive after the update of the Win Win 8.1 8?

  You will find on the page of the Toshiba UE driver all tools Toshiba drivers and utilities to win 8.1.
  Usually after the Win 8.1 update, the software should be updated as well.

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• Blu Ray Menu then jumps and plays the 1 key

  IM creating a Blu Ray menu with a video loop. After the first 12 intro second, I have a loopback point together for the real part of menu. The menu is set as the first piece of theatre.

  My problem happens after I have burn the Blu Ray. The intro works very well, but when he is about to launch the loop menu it automatically plays the first button. Then the transition I installed plays and begins at the first video. If I push the button of main menu or menu from the top of the remote control, it will return to the menu and immediately replays the first button.

  This does not happen when I preview it in yet. Everything works as I want only it in preview mode.

  Help, please!

  P

  Looks like key 1 is the default value and the value of autoactivate.

• Error Blu - ray: 'invalid operation', Code: "19", note: "attributes main video stream must be compatible with the playList.

  Hello

  I can't create a Blu - ray folder or Blu‑ray Image with my project.  Whenever I click on Build, I get this error:

  Purpose of Blu - ray: "< timeline > Untitled chronology", error: "invalid operation", Code: "19", note: "attributes of the main video stream must be compatible with the playList.

  I created my .m4v file and .wav files in Adobe Media Encoder using the H.264 Blu - ray built-in HDTV 1080 p 23.976 high quality.  I also tried to create several variants (encoded Dolby Digital audio, tried the HDTV 1080 p 24 high quality preset).  No matter what I still get the same error above.

  I only have a basic (no movement) menu, but I tried to remove it and still get the error.

  Still isn't my files and I want to keep it this way if possible and use the best rendering of SOUL of transcoding capabilities.  The only change I make for the presets of SOUL must enable VBR 2-pass and use maximum render quality.  Who should not cause the issue?

  I searched the forums and did not find anything.  Someone suggested to restart yet, but that did not help.

  Any suggestions?

  Thank you

  Graham

  I finally got the Blu - ray folder created.  I imported my original uncompressed AVI again and let the transcoding.

  So, the moral of this story is that still did not like the pre-transcoded from Adobe Media Encoder files.  Your suggestion on the audio being a slightly different length as the video could be a possible cause, if SOUL actually creates files with this problem.

• Re: Qosmio F60 - 100 Blue-ray will not start film or same menu

  Hey guys!

  My Toshiba Qosmio F60-100 works perfectly. He has just blu ray player that is causing problems, because whenever I put a Blu - ray drive, it starts the program "Win DVDBD" but never starts playing the movie or even the menu.

  I don't know how I can solve this problem.
  I tried already with the famous update, but when I try to install it, I get a message that the update is not for my computer.

  Thanks in advance for your help.

  Volki

  Hello

  Have you tested different Blue-ray discs?

  I got this Toshiba FAQ
  + Some Blu - ray discs are going to have problems when played on the models of "WinDVD BD for Toshiba" version 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB0402V40000R01.htm

  Check it!

• OTP-S1100: Menu flashes offshore and on every few seconds but plays Fine Blu-Rays

  Just bought a BDP-S1100 & loaded up all the latest firmware & played a new Blu - Ray player successfully, then I turned off for a few hours, then turned it back. Since then, whenever it's on the menu screen, it flashes & on all few seconds. He stills times fine Blu-Rays without problems.

  
  

• Code error C00D1197 and media player says key is missing and require a periodic update as new movies may not play in trying to play a Blue Ray dvd.

  Original title: COOD1197 error code

  When I try to play a Blue Ray dvd (who played originally) said media player an essential component is missing and I need a periodic update as new movies may not play. You want to update now. I select update now. the message just for rehearsals.

  Hi procheGordale,

  1. you remember to make changes to the computer before this problem?

  I suggest you follow the steps from the link below.

  Windows Media Player C00D1197 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Note: You can also follow these steps for Windows Media Player in Windows Vista

  Also check out the link:

  The protocols in Windows Media Player use for streaming?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

  You can also try the upgrade of the safety component for reading protected files.

  To install the security update, visit the Microsoft Web site at the following address:

  http://go.Microsoft.com/fwlink/?LinkId=75378 (http://go.microsoft.com/fwlink/?LinkID=75378 )

  You can also see the following article for more information:

  You may be redirected to a Web page when you try to play Windows Media DRM protected content once you upgrade to Windows Media Player 11 or to Windows Vista

  http://support.Microsoft.com/kb/919589

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Has this been resolved? Menu animated project Blu - ray pauses at the level of the loop point and loss of conference.

  We still CS6 and lively menu of a Blu - ray project that contains a loop point paused at the level of the loop point, resulting in the loss of some images conference.

  Still has a known problem with gaps of loop point. I do not think that this puts the bluray in to pause, however.

• Lack of menu Blu Ray

  When I burn to disc, the Don t of the menu will appear. I have triyed to burn an image with the same results.

  Ann was right, that you seem to have an empty menu, even if you had the 'corporate' folder selected, if something was wrong.

  You seems to be used a "empty menu", so that may well have been a model yet.

  But I think that the problem that you describe is that your menu still works in preview mode before, but when built on an image or a disk and read, it starts with the timeline and not with the menu. Is this correct?

  The first thing to check is with a disk engraved in a blu - ray player. You see the problem here?