Peripheral IP range network ACS 5.6 overlaps the IP subnet

Similar Questions

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• My PC (Windows 7), will automatically connect to the new networks unknown wireless is in the range. I want to stop it.

  I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-disable-auto-wireless-connect-in-Windows-7/52d33896-F356-4F9F-8390-79a686900cab
  http://checit.SCU.edu.au/index.php/FAQ/387
  They do not resolve my problem because my computer connects automatically on * new, unknown * networks that I've never connected to the front (and also, even after it connects to these networks, they do not appear in the list under 'Manage wireless networks').
  Apparently, it set to the default behavior to automatically connect to the new network he meets, and I need that to turn off. Thank you.
   

  Hi Michael,

  I suggest you to perform the steps mentioned by "Steve Winograd replied on November 6, 2009"of a similar discussion.

  Wi-wired connections on the same computer, Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wired-and-wireless-connections-on-the-same-Windows/ee40d9a6-297b-46D4-b5c8-db57d927b62e

  If the problem persists, I suggest to uninstall and reinstall the wireless card to reset all wireless connections.

  Hope this information helps. Response with status so that we can help you.

• All printers are gone, when I try to install the drivers of local or network printers that it says the printer drum is stopped and cannot install the drivers.

  I went to the Services page and started the spool to the printer and restarted (tried several times) and he still has the same error.  Each time I reload all printers (local and network) will be displayed in the printers and peripheral area, but it will not print.  When I reboot all printers will be again disappeared except two local USB printers (all are compatible Vista) and I still cannot print any printer or solution I tried.

  • not able to print
  • printer spool does not (started but Windows 7 think we turn it off)
  • Printer HP Laserjet 3300 unrecognized
  • I rebooted several times with no lick
  • Printers have disappeared each time computer starts then reappear but are not
  • Just downloaded the latest drivers and tried to install, but Windows 7 printer spool does not work
  • Called support of Windows 7 and I was told I had to pay $299 to speak with anyone
  • I went out tonight and bought a plan on the purchase of Mac for the entire company after another failure of Microsoft:(et 2900 $ sur Macbook Pro)

  Check your antivirus App disable to test the print functions. If this works, you need better virus protection.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• How to network two XP running off the same mac?

  I have two machines running virtual XP on my MacPro 10.5.6.  It's because we have a book scanner according, an XP runs the master software and the second XP runs software of the slave.  Basically an XP for the camera on the left and a XP for the right camera.

  However, this technique requires two machines have static IP addresses and connected by a crossover cable.  How could I go to reproduce this situation in VMware fusion?

  You take the path even in Fusion as you would with physical computers. As long as the virtual machines are configured to use the same type of networking (bridged/NAT/host-only), they should be on the same subnet and be able to ping each other. Give them static IP addresses in the range of right (check the DHCP address, they get, this will vary by installation of Fusion).

• When a tab is opened, it does not overlap the screen im on.

  So when I like to open another tab when I click a button, it does not overlap the screen, I'm on and if I click it, nothing happens, so I have to minimize and press tab to open it and when I click on the tab I am the last, it works fine but the other tab is not.

  It seems that your browser runs slowly due to lack of memory (why a new loading tab so seems to freeze and can be thawed by minimize and maximize). This explains also why you can change to the previous tab, but not others; the last tab you used is still in main memory, while the other tabs should return loaded into main memory when you change their (as other data takes the place of the main memory).

  So I suggest you try to restart Firefox (as some may have memory leaks) and closing other applications you have open (use the Task Manager to help if they are slow to respond). If you're still having problems, try closing using the tabs/windows less.

  If you still have the problem, then you should try reinstalling Firefox (see uninstallation and installation).

• HP Premium - why 'Properties of the wireless network' did not appear in the settings!

  Hi, I have updated the firmware on my HP Calculator first, and since then "wireless network properties" have disappeared from the settings. Basically, there are four pages of settings and now there are only three!

  On the other hand, the emulator yet I have this option available on page four of the parameters, as well as the wireless icon on the title bar next to the time (on the upper right corner of the scree).

  Anyone know what's the problem? Why my emulator has the option but the calculator itself not?

  Thank you

  Sam

  Hello

  The problem is that the material of NW280AA does not support:

  Since the notes version 6031:

  "1. When you use HP StreamSmart 410 (NW278AA), the graphic calculator HP first (G8X92AA) now provides the power supply via the USB port."

  This power would probably be necessary for the device wireless also.

  (only compatible with the http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-4132ENW.pdf of America G8X92AA)

  This we can assume that nw280aa does not provide the necessary power, lacks any firmware that tries to use anyway.

  If this feature is important to you, I suggest you only to contact HP for a replacement.

  Best regards.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• A wi - fi network reset to "out of the box.

  Hello

  Sorry to ask what may be a very basic question, but how do you define a wireless router - more WiFi settings of your laptop - back to the way they were when they came out the box? In other words, I want wireless and portable routers that I forget they know so that I can set up my wireless network again as if I put for the first time.

  The reason is a little involved, but for the most part, I had a set up wi - fi network and launched from a Terminal Airport Express and it worked very well. During the holidays I then bought an Airport Extreme because I wanted something a little better for my base unit and then I wanted to use the Express as an Extender. How I wanted to now, I had not tinkered with something that was not broken, as the addition of the extreme for the network was not as simple as I was expecting and my wi - fi network everything seems to go wrong, like my internet connection. I had someone to configure two routers (understand I can I have messed up a setting when I was trying to implement) but still no luck - he would work for a bit and then my internet would just go down. Using Airport utility, showed that routers and internet will run for a few seconds and then would stop and I would lose the connection.

  I work and live on a college campus for the internet at home is powered by an ethernet into the wall jack, just as you would in an office. Through contact the COMPUTING helpdesk, they managed to tell me (although partly because of techno speak and a little bit of a language barrier that English isn't the first language here) I got away from. What I could gather was something like the two routers SSID must be different because they were "beating" and this caused the network to automatically shut down at home? Unfortunately they treat only to provide internet service home and cannot help with the problems of wi - fi.

  I am pursuing other means to help (we are a University of science and technology research, after all!), but something I thought was if I could just reset routers and WiFi my laptop 'memory' of the network and start over as if I was there for the first time. I don't want to plug the router and it says something like "this was part of the XX network."

  Anyone know how?

  Thank you very much

  To configure your router from Apple to its "out-of-the-box" configuration, you must perform a ' default ' reset on this subject.

  For the laptop, if it's a Mac, then you will need to follow these steps for "erase it."

  Start with the first steps (1 - 1). If that is not accomplish what you're looking for, go to step 2.

  1a. remove preferred networks

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Under "Preferred networks", delete the networks you use regularly in the list.

  1B. Airport deleted keychain entries

  Launch the application "Keychain Access", located in Applications/Utilities.

  In the windows on the left side: Select login for keychains and "All items" category.

  Click on the 'Genre' filter at the top and search all "AirPort network password" entries... and remove them.

  1 c. Add Network favorite (s)

  System Preferences > network > Wi - Fi > advanced > tab Wi - Fi

  Add preferred networks using the button «+»

  Restart or disconnect you, then back in.

  2. move the System Configuration files

  (Note: you will need to restore your network connection settings.)

  Go to Macintosh HD/Library/Preferences

  Move the SystemConfiguration folder on the desktop.

  Restart your Mac. (Note: OS X will rebuild the folder & files that are now sitting on your desk in the library > location of preferences.) If this does not resolve the problem, you can move the folder back to its original location.)

• XP SP3 cannot connect to WPA2 wireless network, but can Debian on the same PC.

  I have a Toshiba Portege M200 dual-boot Windows XP Tablet PC Edition with Service Pack 3 installed and Debian GNU/Linux codename Wheezy with Debian non-free package firmware-ipw2x00 allowing my wireless adapter to use and wicd package to manage wireless connections.

  Two operating systems are able to connect to a WPA - PSK network automatically without any problem whatsoever.

  Debian is able to automatically connect to a WPA2-PSK network without any problem, but simply Windows doesn't connect at all.

  Windows shows the WPA2 network in the list of available networks and correctly recognizes as having the WPA2 security.  However, when trying to manually connect, Windows ask me the network key (I have enter), then spend about two minutes «Waiting for network...» "with the usual animation and indefinite progress bar.  Windows back me to the list of available networks window, then shows me not connected to everything as if I didn't choose any.  When waiting for Windows to connect automatically, Windows will sometimes appear a bubble icon connection wireless network saying that it could not connect to one of my favorite networks but that he will continue to try.

  I get no error message or any other message of any kind.  Windows just trying with fanfare and fails silently.

  The two operating systems have updates of installed operating system vendor.

  Someone at - it ideas?

  To give a vision a little to the solution "install a new driver" discussed in the Technet forum thread, it seems that the problem here is the same as that commonly encountered when trying to update printer drivers: a user downloads the new driver and installs it but the problem remains.

  What happens is that if the older driver is not removed all first, it is not replaced by the new driver.

  Windows installs hardware devices using INFs.  They are located in % windir%\inf.  Actually, the previous statement is incomplete.  The first time that a device is installed, Windows uses the INF file to create a corresponding PNF file located in the same directory.  The PNF file is a "precompiled" version of the INF file and Windows Setup actually uses the PNF file because it is "more effective" to do.

  If you download a new driver and replace only the INF file and do not delete the old driver files, when you 'day' the driver, Windows Setup examines the old file PNF which points to the old files and uses.

  Then... either completely uninstall the device or at least delete the PNF file appropriate before attempting to install an updated driver.

  And download the new driver from Toshiba or the manufacturer of the adapter wireless in the computer.  Don't understand from Windows Update.

• All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

  Hello

  you have a problem with my Windows laptop that left me speechless.

  I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

  1. description of the problem

  All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

  However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

  In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

  2 solution unsuccessful attempts

  2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

  "
  Start the editor of the register (Regedt32.exe).
  Look for, and then click the default value under the following registry keys if this problem occurs with folders:
  HKEY_CLASSES_ROOT\Directory\shell
  If this problem occurs with drives:
  HKEY_CLASSES_ROOT\Drive\shell
  Click on edit in the Edit menu.
  Type 0 in the value data box, and then click OK.
  Exit the registry editor.
  "

  (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

  2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

  After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

  If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

  Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

  2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

  Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

  Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

  Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

  3 computer laptop environment and other factors

  3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

  I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

  Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

  Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

  3. the environment of the laptop:

  Acer Travelmate 8204 laptop

  Windows XP SP3 with virtually all updates of installed Microsoft.

  Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

  ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

  Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

  content 'Repertoire' 3 c registry key.

  HKEY_CLASSES_ROOT\Directory]
  "AlwaysShowExt"=""
  "EditFlags" = hex: d2, 01, 00, 00
  "ToolTip"="prop: DocComments.
  @=""

  [HKEY_CLASSES_ROOT\Directory\Background]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Directory\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Directory\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
  @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
  @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
  @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
  @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
  @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
  @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
  @= "{ECF03A33-103D-11d2-854D-006008059367}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
  @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
  @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
  @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
  @=""

  3D 'Drive' content registry key.

  [HKEY_CLASSES_ROOT\Drive]
  @= "Asema.
  "BrowserFlags" = dword:00000008
  "EditFlags" = d dword:000001 2

  [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Drive\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Drive\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Drive\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Drive\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
  @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
  @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
  @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
  @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
  @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
  @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
  @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

  0020AF85B590}]

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
  @= "Menu of portable devices.

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""
  "DriveMask" = dword:00000020

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
  @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

  00AA00A14F56}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  It seems that I managed to solve the problem on my own. Did two things:

  1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

  HKEY_CLASSES_ROOT\Directory\
  HKEY_CLASSES_ROOT\Drive\
  HKEY_CLASSES_ROOT\Folder\

  2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

  Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

  I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

  Thanks for the suggestions for this problem!

• MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

  I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

  A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.