Permission - create new specifications of the model

Similar Questions

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• Error in creating new project to the NDP.

  

  Creating new project in the NDP, I came across the following error. How can I ressemelable this error. I have attached a screenshot.

  Please check if there is a section of configuration as below in Web\npd\web.config.

  And you have a config\Core\EqtUIModelDefinitions.xml file? If so, there could be error in there.

• Problem with 'Create new Extrusion of the selected layer' CC 2014

  Hello, I am experienced with Photoshop but I'm new to 3D text in Photoshop.  I type the text and convert it to a form.  When I choose to create new Extrusion of the selected layer I get the dialog, I don't see in tutorials.  It says "you are about to create a 3D layer.  You want to switch to the 3D workspace?  Yes/No, do not display again. "Which one should I use for the 3D text?

  If I choose Yes, all the panels disappear and the content in the tool options bar (Ribbon?) just under the menu bar disappears.  I have to restart Photoshop to get back on the tool options.  What could I do it wrong?

  Thanks - Dave

  I just chose 'No' and don't look at back.  I love my workspace, just as it is and doesn't prefer Photoshop to change for me in this case especially.

  You bring up the 3D Panel yourself via the window - 3D.  I think it's a good alternative for the Actions Panel, because I don't have any currently working in the 3D world.

  You'll want to see easily if you are working on 3D are 3D Panel and panel properties, among a few others.

  Regarding return your workspace as you like it...  Note the small switch near the upper right of the main window of Photoshop.  That can be used to select a workspace.  I suggest that you experiment and familiarize yourself with the concept of workspaces.  You can set your own and save it with a name, and that can really be useful.

  -Christmas

• Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.

  Illustrator CC 2014 stops working when I click NEW, AGAIN from THE MODEL or OPEN.  I tried to uninstall and reinstall; I also tried to disable the graphics card.  Help, please!

  Problem solved.  It was a mistake of the printer at the origin of the problem.

• 0 blocks free PTR - cannot create new files on the data store

  We have been experiencing problems trying to power on virtual machines. When attempting to power on virtual machines, we see the error "cannot extend the pagefile from 0 KB to 2097152 KB".

  We checked the .vswp file are created in the folder of the Virtual Machine on the data store. Connection to the ESXi host, we have seen the following in vmkernel.log error message:

  (2016 01-16 T 21: 19:40.556Z cpu1:4971732) WARNING: Res3: 6984: "freenas-6-ds": [rt 3] No. Space - has not found enough resources after the second pass! (requis_:_1,_trouvé_:_0) 2016-01 - 16 T 21: 19:40.556Z cpu1:4971732) Res3: 6985: "freenas-6-ds": [rt 3] resources t 0, e 0, PN 16, BM 0, b 0, RCs u 0, i 0, 4031 nf, pe 0, 0 2016-01-16 T 21 oe: 19:40.556Z cpu1:4971732) WARNING: SwapExtend: 683: impossible to extend the pagefile from 0 KB to 2097152 KB.

  This was surprising given that we have about 14 TB of space available on the data store:

  [root@clueless:~] df h

  Size of filesystem used available use % mounted on

  VMFS-5 20.0 T 5.4 T 14.6 T/vmfs/volumes/freenas-six-ds 27%

  However, when we use "dd" to write a 20 GB file, we would get "no space left on device:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] dd if = / dev/urandom of = deleteme bs = 1024 count = 2024000

  DD: writing "deleteme": no space is available on the device

  263734 + 0 records in

  out 263733 + 0 reviews

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040/deleteme] ls - lh deleteme

  -rw - r - r - 1 root root 19 Jan 255,1 M 01:02 deleteme

  We checked that we have free inodes:

  The ramdisk name system include in reserved Coredumps used Maximum reserved free use pic free maximum allocated Inodes used Inodes Inodes Mount Point

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  root of true true 32768 KiB 32768 KiB KiB KiB 99% 99% 9472 4096 3575 176 176.

  true true etc 28672 KiB 28672 KiB 284 KiB 320 KiB 99% 99% 4096 1024 516/etc

  Choose true true 0 KiB KiB 0 KiB KiB 0 100% 0% 8 1024 8192 32768 / opt

  var true true 5120 KiB 49152 484 516 99% 90% 8192 384 379 KiB KiB KiB / var

  tmp false false 2048 KiB 262144 KiB 20 KiB 360 KiB 99% 99% 8 256 8192/tmp

  false false hostdstats KiB 310272 KiB 3076 KiB 3076 KiB 99 0% 0% 8192 32 5/var/lib/vmware/hostd/stats

  
  

  We believe that our cause is due to have 0 free blocks of PTR:

  [root@clueless:/vmfs/volumes/55a00d31-3dc0f02c-9803-025056000040] vmkfstools Pei - v 10/vmfs/volumes/freenas-six-ds.

  System file VMFS-5, 61 extending on 1 partition.

  File system label (if applicable): freenas-six-ds

  Mode: public TTY only

  Capacity 21989964120064 (blocks of files 20971264 * 1048576), 16008529051648 (15266923 blocks) prevail, max supported size of the 69201586814976 file

  Volume creation time: Fri Jul 10 18:21:37 2015

  Files (max / free): 130000/119680

  Blocks of PTR (max / free): 64512/0

  Void / blocks (max / free): 32000/28323

  The secondary blocks of Ptr (max / free): 256/256

  Drop blocks (approve/used/approve %): 0/5704341/0

  Blocks of PTR (approve/used/approve %): 64512/0/0

  Void / blocks (approve/used/approve %): 3677/0/0

  Size of volume metadata: 911048704

  UUID: 55a00d31-3dc0f02c-9803-025056000040

  Logical unit: 55a00d30-985bb532-BOI.30-025056000040

  Partitions split (on 'lvm'):

  NAA.6589cfc0000006f3a584e7c8e67a8ddd:1

  Instant native is Capable: YES

  OBJLIB-LIB: ObjLib cleaned.

  WORKER: asyncOps = 0 maxActiveOps = 0 maxPending = 0 maxCompleted = 0

  When we turn off a virtual machine, it will release 1 block of PTR and we would be able to on another VM / create the 20 GB file using "dd". Once we reached 0 free blocks of PTR, we are unable to create new files.

  Can anyone give any suggestions on how we may be able to clear the blocks PTR? We have already tried to restart all services of management on all ESXi hosts connected.

  FreeNAS is not running on a virtual machine.

  We solved the problem by finding a lot PTR blocks have been used by many of our models of virtual machine. Remove the disk models solved the problem.

• Create new region in the page template

  Hello

  I use Apex 4.2 with enterprise DB 11, I try to create the new zone in the page template of "application > share the component > model > page > edit page" I add #REGION_POSITION_20 # #REGION_POSITION_01 # and its added successfully, the problem is when I use this page template on my page, I see the région #REGION_POSITION_20 # added to the model , but I can't select a position for the region.

  Any suggestion

  Hani says:

  I use Apex 4.2 with enterprise DB 11, I try to create the new zone in the page template of "application > share the component > model > page > edit page" I add #REGION_POSITION_20 # #REGION_POSITION_01 # and its added successfully, the problem is when I use this page template on my page, I see the région #REGION_POSITION_20 # added to the model , but I can't select a position for the region.

  Any suggestion

  You cannot create additional region position placeholders. Why do you think that you need to do?

  Several areas can be assigned to each position in the region, the existing placeholders can be moved, regions may contain subregionsand region controlled by the attributes of the region and/or CSS page layout. These options provide more flexibility for most requirements.

• create new record in the table of the tree

  REFERRED to the ADF Code 83 corner. How-to - create the two-way synchronization between a tree and a form input element

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/83-bidi-synchronization-tree-form-401841.PDF

  Mr.Frank usese (deptId) of allDepartmentsWithEmployeesIterator-> > > iterator

  to insert the new employee in the service selected tree node

  it get the departmentId for the current line of allDepartmentsWithEmployeesIterator

  and set it as the new employee to the new departmentId inserted in the allEmployeesIterator

  This multiy in table tree we have the employees table and departments table

  ------------------------------------

  	public String onCreateEmployee() {}
  	BindingContainer links = getBindings();
  	OperationBinding operationBinding =
  	bindings.getOperationBinding ("Create1");
  	Object result = operationBinding.execute ();
  	If (! operationBinding.getErrors () .isEmpty ()) {}
  	TODO add the error handling
  	Returns a null value.
  	}

  	a department Id the value of the tree node's parent
  	DCIteratorBinding = departmentIter
  	(DCIteratorBinding) bindings.get ("allDepartmentsWithEmployeesIterator");
  	Line currentDepartmentRow = departmentIter.getCurrentRow ();
  	Object deptId = currentDepartmentRow.getAttribute ("DepartmentId");
  	DCIteratorBinding = employeesIter
  	(DCIteratorBinding) bindings.get ("allEmployeesIterator");
  	Line currentEmployeeRow = employeesIter.getCurrentRow ();
  	currentEmployeeRow.setAttribute ("DepartmentId", deptId);

  	Returns a null value.
  	}

  -----------------------------------

  I'm doing the same functionalty

  in the same tree table

  Insert the child registered under the selected parent node

  but it gives me the ID of the employee of topRank

  in which case we use tree one View object

  as long as same as in ADF code corner article

  032. creating a table tree of a single object View and access selected lines

  We thus obtain the topRanked EmployeeID Steven King is 100

  not the employeeId correct if you select low-tier employee

  ------------------------------

  Create Itried to use with the parameter

  He gave me the same result always it create used under top class used 100 steven King

  not covered by the selected Manager

  -----------------------------------------

  in a few words I'm looking for a way to insert a new line under the selected node

  in the case of the component tree is based on the same view object

  is it an idea or a help on this

  Hello

  in your case, the employee Id is what you need to get the tree component itself. In my article, I rely on the synchronization between two iterators, which in your case is not possible. If access you the component of the tree to get the current selected node. This should be an instance of JUCtrlHierNodeBinding that you can call getRow to obtain the selected user. You can query a second View object to show the employee to edit (the current together by key line). Even when you create a new employee. Access you the second VO iterator used after you call Create to create a new line. On the iterator, you call iterator.setAttribute (attribute_name, value_read_from_parent)

  Frank

• Help (going crazy)! Create workflows to duplicate the model?

  Hello

  Sorry this will sound like a strange glitch ...

  I've been setting up Orchestrator 5.5 to learn about it and it seemed that I had this kind of work late last night.  I had an ESXi, VCenter server and Orcheastrator machines.  The ESXi, I have a Windows 2008 core machine which is defined as a model, and I can see that in ESXi in VSphere client and Orchestrator.

  Somehow (I don't know how) I could begin to create a workflow, apparently in the GUI Orchestrator, where I could choose the model and start a workflow for cloning that.

  I even screenshots of it, but then I went to bed (it was late, as 04:30 or something) and I intend to continue when I woke.

  So, now I'm once again in place and can connect to the GUI Orchestrator as "vcoadmin", but I can't go back to where I was.

  I took screenshots as I went along, and it's the first one I took.  I think I can start a workflow now, I can get to that point, BUT, when I get to this place, I don't have the buttons on the bottom (circled in red).  Also, is not the 'Select (VC:VirtualMachine)"at the top left, so I think I was doing something different last night vs now.

  So I have NO IDEA how I got to this below?

  So I was wondering if someone who is more familiar with Orchestrator 5.5 tell me how I am to the point where I was doing a workflow to clone a model and has been selecting the model as below?

  Thank you

  Jim

  

  The fact that you see "admin @ 192.168.0.133" in the caption of the window and are able to connect with vcoadmin/vcoadmin is an indication that your current authentication of vCO mode is set to embedded LDAP.

  My hypothesis is that when you first deployed the EGGS vCO and vCO configuration crossed, you have configured some mode of authentication for example. SSO or external LDAP and when stop you systems and their back upwards, for some reason any obtained authentication of vCO mode is returned to the built-in default LDAP. Sounds doable?

  Now, I'm not quite sure what could have caused possible this reversal of the authentication mode. One solution is to reconfigure the vCO again, and the other option is to continue to work in the mode of authentication LDAP incorporated by using the credentials of the vcoadmin/vcoadmin.

• Cannot find where to create "Customization Specifications" for the VM

  So I am creating a specification of "customization." I found several articles that point to this: http://screencast.com/t/jMeP2Q4nA2c

  (article: http://www.dabcc.com/article.aspx?id=10292)

  But, I have simply connecting to vCenter. That is just missing for me: http://screencast.com/t/MyxVYZpkm

  Where is he to Horizon of VMware View now?

  Thank you.

  What operating system you are trying to create a pool for? Custom features are the "corrected" (if you want) for SysPrep. These are created on the vCenter server and you will need appropriate permissions (if you are not an administrator of vCenter) to make of these. You need it for every single Guest OS (Windows or some Linux distributions) installation (by example, if you had 3 installs different from XP that had different needs, you'd have 3 plug custom, if however, you used a volume license and they had all the same basic settings with DHCP and used the VM name for the name of the computer) you have only one).

  You just 'install' the sysprep files during the setup of XP. Vista and later have the SysPrep files natively installed.

• create new folder, but the path does not exist.  That's why I need to create!

  I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits.  In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent.  But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist.  Which may be the reason I'm trying to create the new folder.  Everything seems to be able to do is to slect the existing folders.  Where is the creation of a new part of catalogue record?

  If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.

• creating new user of the old user

  Hello
  How can we create new user as a former user.
  That may be a short and sweet method.
  
  Thank you
  Mhamed

  I'd be happy to but frankly the solution of Centinul years light better than that.

  1. already written.
  2. easier.
  3. faster.

  I would use his link instead and I consider strongly marking its "correct". This helps the forum too because he gave you the response time will not
  be lost, trying to answer a question already answered.

  Best regards

  mseberg

• Error when creating new record in the jspx page.

  Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
  
  DB I trigger and in the EO primary key attribute I Type set to DBSequence.
  
  Where is the problem and what to do?
  
  Best regards, Debuger

  @Sireesha excellent point!

  @Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?

  John

• API to create new objects in the inventory

  Hi all
  What is the api used to create articles (Master) in the inventory.
  
  Thank you and best regards,
  Mahesh

  Mahesh,

  Please refer to the following documents.

  Note: 395493.1 - how to use the public APIs for inventory (undocumented)
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=395493.1

  Note: 295475.1 - identify the public API to import items, categories and catalogs
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295475.1

  Additionally, you can check [repository integration Oracle | http://irep.oracle.com/].

  Kind regards
  Hussein