creating new user of the old user

Similar Questions

• I cannot create new user accounts and have tried all the steps listed in all of the current discussions, does not

  Good people you've heard of this one before:

  I can connect to my basic admin account, but not others.  I tried to create new user accounts after you delete the old user accounts but system would not apparently carry out process.  I get the following warning:

  Service user profile Service failed to connect
  User profile cannot be loaded.

  I tried all of the recommended patches (see list below)

  1 ran all appropriate steps as stated in the article: http://support.microsoft.com/kb/947215 - no joy
  There is not other profiles listed in the register except the administrator account on the basis and since I couldn't connect successfully to a user apparently newly created accounts, the profile has not completed the process of generation.

  2. I have not ran the SFC system - no joy.  He replied with the following: Windows Resource Protection did not find any breach of integrity.

  Then... of other big ideas?

  Oh
  Running Win 7 with all latest updates (login problem is not a new problem according to my children - I just got back from the extended learning this persistent problem)
  I am on an Intel machine running dual quad core which is only 6 months old.
  I run MS Office 2010

  Hello

  I suggest you to consult the steps mentioned in the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/i-cannot-create-a-new-user-account-Windows-7-the/dee340f7-5da9-402b-9e99-293dbd249a53

  Hope this information is useful.

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• How to replace a new HDD with the old?

  Original title: new HARD drive

  IM installing a new hard drive to replace my old. How can I reinstall windows 7 with all my files and programs?

  Here are a few options:

  • Create an image of the old disk, and then restore that image to the new drive.
  • Use a third-party disk cloning tool.

  The first option requires a good dose of experience. Ask a computer-savvy friend to help you.

• How to compare the new values with the old values in triggers.

  Dear all,
  
  Please tell me how to compare the new values with the old values in triggers.

  Hi, the employee example is in the document. You'd better read yourself.

  CREATE OR REPLACE TRIGGER Print_salary_changes
    BEFORE DELETE OR INSERT OR UPDATE ON Emp_tab
    FOR EACH ROW
  WHEN (new.Empno > 0)
  DECLARE
      sal_diff number;
  BEGIN
      sal_diff  := :new.sal  - :old.sal;
      dbms_output.put('Old salary: ' || :old.sal);
      dbms_output.put('  New salary: ' || :new.sal);
      dbms_output.put_line('  Difference ' || sal_diff);
  END;
  /
  

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• Error in creating new project to the NDP.

  

  Creating new project in the NDP, I came across the following error. How can I ressemelable this error. I have attached a screenshot.

  Please check if there is a section of configuration as below in Web\npd\web.config.

  And you have a config\Core\EqtUIModelDefinitions.xml file? If so, there could be error in there.

• I have a new computer because the old computer was broken. Can I use Lightroom license more far. Or the license needs to be reset?

  
  

  I have a new computer because the old computer was broken. Can I use Lightroom license more far. Or the license needs to be reset?

  The license agreement that you signed up to you to have two machines with enabled facilities.

  The option to turn off depends on which version of Lightroom, it is.  Anything older than that version 6 has no option - simply reinstall and activate if necessary.

• I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to disable the other computer without using this computer?

  I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to deactivate the license on the old computer without using it?

  you are allowed two facilities, activations, you should may not disable before activating on your new computer.

  But if you don't, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html.  Ask a county of activation reset.

• Problem with 'Create new Extrusion of the selected layer' CC 2014

  Hello, I am experienced with Photoshop but I'm new to 3D text in Photoshop.  I type the text and convert it to a form.  When I choose to create new Extrusion of the selected layer I get the dialog, I don't see in tutorials.  It says "you are about to create a 3D layer.  You want to switch to the 3D workspace?  Yes/No, do not display again. "Which one should I use for the 3D text?

  If I choose Yes, all the panels disappear and the content in the tool options bar (Ribbon?) just under the menu bar disappears.  I have to restart Photoshop to get back on the tool options.  What could I do it wrong?

  Thanks - Dave

  I just chose 'No' and don't look at back.  I love my workspace, just as it is and doesn't prefer Photoshop to change for me in this case especially.

  You bring up the 3D Panel yourself via the window - 3D.  I think it's a good alternative for the Actions Panel, because I don't have any currently working in the 3D world.

  You'll want to see easily if you are working on 3D are 3D Panel and panel properties, among a few others.

  Regarding return your workspace as you like it...  Note the small switch near the upper right of the main window of Photoshop.  That can be used to select a workspace.  I suggest that you experiment and familiarize yourself with the concept of workspaces.  You can set your own and save it with a name, and that can really be useful.

  -Christmas

• Turn on the new machine when the old disk machine broke down?

  Turn on the new machine when the old disk machine broke down? What happens if I give you a demo on my laptop, that laptop goes down and I need to revisit my laptop back after a quick reinstall? What should I call? Or cela just re - turn on and off automatically a previous version?

  You will be prompted with a disabling dialog box when you try to do a third activation.

• Create new user in Oracle R12 ERP.

  Hello
  
  How can I create a new user directly in the database instead of create in the menu system administrator in Oracle Applications R12?
  Also, is it possible to apply certain responsibilities by default when a new user account creation are performed by the database?
  
  
  Thank you.

  RRA wrote:
  Hello

  How can I create a new user directly in the database instead of create in the menu system administrator in Oracle Applications R12?
  Also, is it possible to apply certain responsibilities by default when a new user account creation are performed by the database?

  Thank you.

  This topic has been discussed many times in the forum before, please see old topics for the same topic/discussion with code that you can use.

  Create the user of the Application from the Backend
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=create+and+application+and+user+and+backend&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=create+and+users+and+API&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Assign responsibilities API
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=assign+and+responsibilities+and+API&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  FND_USER_PKG API
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  FND_USER_PKG. CreateUser
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.CreateUser+&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  FND_USER_PKG. AddResp
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.addresp&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• OBIEE, cannot create new users or groups

  Hello

  With the help of OBIEE 11g, everytime I try and create a new user or group in the administration Console, it allows me to type the name and description, but when I click 'Ok' to save, the console heading to an error page that says:

  In Firefox:

  Problem loading page

  Server not found

  Firefox can't find the server at [2002.

  
  

  In IE, it just says: the address is not valid

  The URL is : http://[2002:7001/console/console.portal? SecurityUsersCreateUserPortlet_actionOverride = com/bea/console/stock/security/users/createuser/finishing /

  I checked the logs, but have not seen everything about it.

  Can I change an existing user or group very well.

  I also tried to restart the server, but it always does.

  Any ideas?

  Thank you

  Open the Console - servers--> server - general Admin check the listen address and Machine name how it is configured

  Listen Address says (Weblogic guide):

  IP address or DNS name this server uses to listen for incoming connections.

  The servers are accessible through the following URL:
  Protocol://listen-address:listen - port

  Any channel network that you set up for this server may substitute this listening address.

  If listening address of a server is not defined, guests can reach the server through an IP address of the computer that hosts the server, a DNS name that corresponds to the host or localhost string. The localhost string can be used only for applications for clients running on the same computer as the server.

  If you want to limit the valid addresses for a server instance, specify one of the following:

  • If you provide an IP address, clients can specify the IP address or a DNS name that corresponds to the IP address. Clients that specify an IP address and try to connect via a SSL port must disable host name checking.
  • If you provide a DNS name, customers can specify the DNS name or the corresponding IP address.

  Don't let the address listen not defined on a computer that uses several IP (a multihomed computer) address. On such a computer, the server binds to all available IP addresses.

  Thank you

  Angelique

• create new user similar to scott

  Hello
  I want to create a user with the same roles that the user scott. I am unable to find any specific role assigned to the user scott that I can attribute to my new user. Any help?
  
  Thank you
  Ashish

  conn scott/tiger
  
  SELECT * FROM user_role_privs;
  

  So my advice is to forget about the result of the query and the specific system privileges you actually need. These roles are for demonstration purposes and should not be used or relied upon. I guess that the following would be sufficient.

  SELECT DISTINCT object_type
  FROM dba_objects
  WHERE owner = 'SCOTT';
  
  GRANT create session TO ;
  GRANT create table TO ;