Help (going crazy)! Create workflows to duplicate the model?

Similar Questions

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• Please HELP - problem with 2 fixed column of the model Dreamweaver CS3

  I am creating a website using the 2 column fixed, no sidebar, header and footer template html in Dreamweaver CS3.  I tried to put a photo in the right side bar as well as in the part main content or to the left of the page, and no image is displayed when I view it in any of the browsers I use.

  I did some only minor changes in the colors and sizes, but other than that, no other changes.  The pic that I put in the header appears perfectly fine.

  Any help or advice for this problem would be greatly appreciated.

  Thank you!!

  I'd like to help you too.  But we do not have enough information about the structure of your site.

  Can you please download this page of test and images on a web server space and post a link?

  Otherwise, it could be that your images were not optimized for the web (jpg RGB)?  In Photoshop, click on save for Web...

  Or it may be a problem of the link path

  Change this:

  

  to do this:

  

  or this:

  

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• Permission - create new specifications of the model

  Hello

  The GSM user guide says that to create a model specification, users assigned to the role of CREATE_FROM_TEMPLATE_1009 can do. But what we realized, it was that users may need additional permissions from the template, the user should at least read permission to the specification of the model, in order to create from this Spec model.

  Is this approval as expected or we're missing any functionality-setting. Please confirm.

  Kind regards

  Kumar

  Users must be able to read the model they use as a base, then they will have to be added to the permissions of the WFA of your model.    It's in place, so you can control the security and visibility of the model.   For example, you can have 5 groups that can create specifications for packing of models but only a group can use models of labelling of North American, Group B North American Base packaging models etc..

• Help, please! Going crazy trying to connect to the internet!

  I'll start at the beginning

  Computer is a HP Pavilion s7220n Slimline PC

  1 / computer wouldn't boot & recovery would freeze

  2 / I tried a disc repair & which froze

  3 / cut my losses & reformatted

  4 / installed a copy of xp pro

  Bike XP boots & everything works fine outside the internet connection of the single network adapter, it recognizes is the1394 net adapter

  5 / downloaded all the updates that are available for 7220 & I tried to install it

  6 / some updates won't install because of course I deleted the original copy.

  All I really care reconnects to do that I need to recognize and install the adapter in the computer network

  How can I do this?

  What do need me download/install to get the hardware & driver to work

  Any & all help and advice would be greatly appreciated

  

  Thank you Cheryl!

  I think you get the idea, now in line with sound - you have done my 10 year daughter very happy & me a dad very relieved to see the back of this little problem.

  FYI, I went for an easier option a surround sound box USB - http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4115644&CatId=2771

• Please help going crazy!

  I forgot my administrator password and a hint, how or what I can do to reset or send to my email address

  Hello

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Some performances are not completed to help put an end to everything in the model of parallel processes

  Hello

  This question confued me recently, I would use a parallel process of model and to finish running at the same time.

  If there are action steps in order, it seemed that will put an end to the execution of all.

  However, I put a wait instead of steps of the action function, there are a few executions not interrupted while I pressed the button finish everything in the toolbar.

  Hope someone can give me help. Thank you very much.

  PS. the number of testsockets has the value 9 in my teststand.

  I ran your sequence again, and I have reproduced the issue.

  It seems the action of the polls Test for success/failure of the VI at full speed.

  It will consume your CPU resource to 100%.

  So I add some delay in the VI to prevent election full speed.

  Please see the following block diagram.

  

  I tried and it seems resolved the problem.

  Ting

• Create dummy records using the model cluase with date field condition

  Hi all

  I have two tables below:

  create the table Interest_date

  (

  date of interest_date_field,

  Number of Interest_amount

  );

  create the table sys_date

  (type varchar2 (30),)

  date_value date

  );

  Insert all

  IN Interest_date values (to_date('01-11-2012','DD-MM-YYYY'), 20)

  IN Interest_date values (to_date('01-12-2012','DD-MM-YYYY'), 40)

  IN Interest_date values (to_date('02-01-2013','DD-MM-YYYY'), 60)

  IN Interest_date values (to_date('01-06-2013','DD-MM-YYYY'), 80)

  IN Interest_date values (to_date('01-07-2014','DD-MM-YYYY'), 10)

  IN Interest_date values (to_date('25-11-2014','DD-MM-YYYY'), 20)

  INTO SYS_DATE VALUES ('FIRST_DATE',TO_DATE('01-06-1900','DD-MM-YYYY'))--note: the year is not important but the date is used for other

  INTO SYS_DATE VALUES ('FIRST_DATE',TO_DATE('01-12-1900','DD-MM-YYYY'))--note: the year is not important but the date is used for other

  Select * twice;

  Requirement:

  I need to write a select statement that retrieves all the records in interest_date and add a dummy record according to what follows:

  -in NO case of JJ - MM interest_date_field for a given year (year group) = DD - MM of the date_value in sys_date where the type is "FIRST date"-> add a dummy record (date_value for type FIRST_DATE yyyy = year of interest_date_field, - 1)

  -in NO case of JJ - MM interest_date_field for a given year (group by year) = DD - MM of the date_value in sys_date where the type is 'SECOND DAY'-> add a dummy record (date_value for type SEOND_DATE yyyy = year of interest_date_field, - 1)

  Desired output:

  Interest_date_field Interest_amount

  06/01/2012-1

  11/01/2012 20

  12/01/2012 40

  01/02/2013 60

  06/01/2013 80

  12/01/2013-1

  06/01/2014-1

  07/01/2014 10

  25/11/2014 20

  01/12/2014-1

  Thank you very much

  Ferro

  Why not combine the first with the second approach:

  with the years as)

  Select distinct

  TO_CHAR (interest_date_field, "YYYY") y

  of Interest_date

  )

  year_dates as)

  Select

  to_date(y||) MD, 'YYYYMMDD') d

  years

  (to_char(date_value,'MMDD') md by selecting in SYS_DATE)

  )

  Select

  I have interest_date

  an interest_amount

  of interest_date

  model

  dimension (interest_date_field i)

  measures (Interest_amount a)

  rules)

  a [for i (select year_dates d)] = nvl (a [cv ()],-1)

  )

  i order

• I downloaded a template that I need to fill out multiple times for different customers.  How to duplicate the model and save it in Adobe?

  Help

  Hi elir36398870,

  Forming this model is in? If it's a PDF file, then I suggest to make multiple copies before filling for various clients.

  Or whenever you want to save the PDF file, use Save as instead of save option to make a copy of the file.

  Thank you

  Abhishek

• Changes of relative path to absolute path when creating a child of the model

  Hello

  I found very useful model Dreamweaver features and was doing well until I created a child by selecting the Site template and the template file in the new Document dialog box to discover the following problem:

  In the template file, a path appears as follows:

  "" < link rel = "stylesheet" type = "text/css" href = ".. /.. / common/css/all.css">

  However, in the case of the child, the same path has changed to the following:

  "< link rel ="stylesheet"type =" text/css" href="file:///D|/xampp/htdocs/xyz.com/common/css/all.css ">

  I want to retain the same relative path in the child's file. Please advise me how it can be maintained.

  Thanks as always,

  EAD

  In the template file, a path appears as follows:

  " href =".. /.. / common/css/all.css '> '.

  It is not possible for a link appears like this in your model. This is because the template MUST be in the templates folder, which is at the root of the site. A single deep folder level, it is only possible to go UP one level to look for any other file/folder in the site. But your link says to go up TWO levels! Something wrong here. Is your template in the Templates folder? Is - this folder at the root of the site?

  Furthermore, Ben's response is quite accurate. Given that DW does not know when your page of the child should be registered, it cannot create the link until it is saved.

• How to create bar codes in the model of BEEP

  Hello
  
  I have an obligation to create a bar code in the PIF based on an input field. Please let me know how to create a bar code.
  
  Thank you
  
  Nita

  Hello

  -Simply download IDAutomation barcode fonts fonts. install this barcode font in your local fonts (C:\WINDOWS\Fonts)
  -Copy the same font (.) TFT) and beep path installed as xmlp\font (windows box)
  -After adding the police in your local area, you can find the same thing on MS works fonts (so that font is available for use in ms word)
  -Use the entry filed in the placeholder and replace the police in rtf model barcode fonts
  -You can now view this bar code font in ms word and reports too.

  Kind regards

  collange

• PS2 Mouse goes crazy on T8000

  Hello
  When I trie to use an optical mouse to Trust with my T8000, this mouse goes crazy. Mouse 'internal' in the keyboard continues to work perfectly... but it's who wants to use it?
  Ideas anyone?

  Hello

  It is not easy to explain why this happened. In my opinion, you should try with a different external mouse. Also try disabling the internal mouse while using an external.

  Also check the BIOS settings. There is an option called pointing device or something like that. Try to change the automatic selection at the same time.

• Active library created in illustrator cc does not appear in the model of adobe

  Are one-way unique active library? Those created on adobe mobile apps (draw, shape, comp) appear in desktop applications. But not the external manner around? I created a graphic library asset in illustrator cc. But although the new name for the library, I created showed upward in the model, the graph or the good does not. Appreciate any help on this.

  It works for me. I made a new document of comp. I chose the icon of chart (top-right). In the column of import of the expert group who opened, clicked on my files. He showed me the files that I had stored in my CC account. He showed two files HAVE that I had downloaded. I already have one and you click Open. He was placed in my layout.

  Good luck.

• Library assets created in illustrator cc. But it does not appear in the model

  Are one-way unique active library? Those created on adobe mobile apps (draw, shape, comp) appear in desktop applications. But not the external manner around? I created a graphic library asset in illustrator cc. But although the new name for the library, I created showed upward in the model, the graph or the good does not. Appreciate any help on this.

  Library assets are certainly a reciprocity. Check out this thread: Active library created in illustrator cc does not appear in the model of adobe

• How to duplicate the composition that contains nested compositions?

  I know that if you duplicate the composition in the project the object containinf window will not be dependent on original model. But what about complex compositions that has nestled in 2, 3 compositions, how to duplicate the model of the root and make all the comps child separated from the original?

  http://aescripts.com/true-comp-duplicator/

  Mylenium