Peut a host VMs ESX Server belonging to several distinct areas

Similar Questions

• How to know a program if a host is esx server or vcenter Server?

  Hello

  How to know a program if a host is esx server or vcenter Server?

  Kind regards

  NGO

  You can take a look at the section aboutInfo using either the apiType the difference between the host ESX (i) and vCenter - http://pubs.vmware.com/vsphere-50/index.jsp?topic=/com.vmware.wssdk.apiref.doc_50/vim.AboutInfo.html

  If you need to figure out if its an ESX, ESXi host, etc. then you can use productLineId

• To VMs in Server VM ESX cluster

  Aloha,

  I have a host running six XP SP2 virtual machines on VMWare Server 1.0.5. I want to migrate my ESX cluster.  What is the easiest way to do this?

  Mahalo, Bill

  You do not need the enterprise version, you can use the free version.

  You install Vmware Converter on the server that has VMware Server installed, then you can either do convert the 'physical' machines which are virtual machines or turn off the VMs system and get a Converter to convert the VMware ESX Server VM files

  -

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• Cannot connect esx host or vcenter server via powercli (cannot run the cmdlet Connect-VIServer)

  Dear team,

  Once I opened powercli windows, I m unablwe to connect the ESX host or vcenter server, it gives me the following error... Help, please

  

  concerning

  Mr. VMware

  Hello, MrVmware9423-

  It seems that this may have to do with the .NET Framework is installed on the computer on which you run PowerShell/PowerCLI.  Take a look at http://communities.vmware.com/message/2174319 - users have been able to solve the problem with a newer version of the .NET Framework (v2, installed v3.5 - success).

  Because your problem seem (you use a? 2 version of .NET, and you're able to install a newer version)?

• The "Console" tab fails on servers on a host ESX Server 3.5.0

  Hello

  On one of our server VMware ESX 3.5.0 123630 hosts, I get an error message when I try to use the "Console" tab on the servers located on the ESX Server.

  The error message "unable to connect to the host esx006.sb.local: a connection attempt fails, because the connected party did not properly after a period or the connection failed because the connected host has failed."

  This ESX Server is configured as all the other ESX servers in our environment, so I don't understand why it does not work on the ESX Server.

  I have no problems connecting to the ESX Server and I have no problems connecting to servers through the mstsc.

  I have the following VMware Infrastructure customers installed on my computer:

  -VMware Infrastructure Client 2.5

  -VMware Virtual Infrastructure Client 2.0

  -VMware vSphere Client 4.1

  To connect to the above mensioned ESX Server, I use the client "VMware Infrastructure Client, Version 2.5.0 Build 147704".

  Can you help me solve this mystery?

  Kind regards

  Carl-Marius

  Hi still =)

  Sorry, that you're still having problems... I hope that we will get there in the end!

  In any case, take a look at the following site, there is a solution out there that can help (it's certainly worked for several!) people who added to comments

  Please try this and let me know how you go.

  See you soon

  Waffle

• Unable to virtualize the host esx Server quadcore AMD Barcelona B3

  I have a server with AMD Quad Core CPU Barcelona B3 32 GB of RAM. I installed ESX 4.0 update1 on it successfully. After that, I try to virtualize esx server on this server. I added the new virtual machine with a standard configuration. When I try to boot the cdrom ESX4.0 I get the error message shown in the attachment.

  I tried with esx 3.5 and 4. Same mistake.

  cpuinfo on the esx host recognizes that UC is B3.

  I would be grateful no work around for this work.

  Thanks in advance

  It seems that your host is in an EVC cluster configured for Opterons third generation.  VCA usurps the guest not to not CPUID settings for a 'lowest common denominator' CPU, which is, unfortunately, a B2.  Try to remove the EVC cluster host.

• Pics of member comments on all hosts on the new esx Server

  Peaks mem comments on all hosts on the new esx server, but the operating system does not use the amount of memory.

  The results are same vm running on the esx servers

  HP DL380 G6

  Dual Core CPU 8

  Xenon E5520 2.27 GHz Intel

  VCA mode Intel Xenon 45 nm Core2

  Guest mem 95% +.

  HP DL380 G5

  Dual Core CPU 8

  Intel Xenon X 5450 3.00 GHz

  VCA mode Intel Xenon 45 nm Core2

  Guest mem typically 25-35%

  The 3 peaks located on the new server.

  The new G6 in the memory market settles after a while if I put manually:

  Use Intel VT-x/AMD-v for virtualization and EPT Intel/AMD virtualization MMU nec training

  If I move G5 servers all right, move them back it culminates on mem. waited for itself if it settles, but no go.

  PS we put in CVS mode on the cluster.

  New servers booted on peak still G6 mem comments.

  Any thoughts?

  You have to refer to this before KB ?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Of Windows 7 XP mode on host esx server 3i

  My windows 7 release candidate virtual machine running on a VMWare ESX Server 3i (3.5.0, 123629) host does not currently have hardware virtualization, xp mode requires.  Assuming that the processors in the host server supports virtual machine are configurable to support too?  I think that AMD processors on the host will support it.

  Thank you

  See also:

  Windows XP Mode for Windows 7

  http://www.vcritical.com/2009/05/VMware-ESX-4-can-even-VIRTUALIZE-itself/

  André

  @gsander: as far as I know, hardware virtualization extensions are not virtualized with any product of VMWare, so XP mode does not work with Win7 as a virtual machine.  (as it says in the first link).

  @Andre:

  > But why? Is easier to create an another VM with XP

  XP mode is a fully licensed copy of Windows XP, so it's really like to get two licenses for Windows; a 7, one for XP.  The limitation is that XP mode is a virtual machine running only in the installation of Win7.  In addition, MS gave XP mode integration limited to Win7.  Tests so Win7 integration may be useful to some people.  Thus, the ability to run XP Mode in a virtualized instance of Win7 is desirable.

• displacement of the configurations of lab manager between the ESX server host computers / data warehouses

  Hello

  Is it possible to move configurations of lab manager between the ESX server host computers / data warehouses? I don't see an option in the library & gt; Clone library. Thank you!

  Recently, I used SSMove to migrate our datastore LM set a new LUN.  It's really simple to use.  This KB gives complete instructions on SSMove http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1006694&sliceId=1&docTypeID=DT_KB_1_1&dialogID=8456583&stateId=0%200%209407965

  See you soon

  Paul

• ESX Server on an ESX host, for training purposes

  Hi all

  For application of training, I would create two ESX hosts but with a limited hardware, in fact, I have 1 good server and this attitude is soft and I was wondering if there is a way I can install a second ESX Server on top of one as a virtual machine, it's just for training purposes.

  Any advice would be great,

  Thanks in advance,

  Cool, thanks for the useful

  www.phdvirtual.com, manufacturers of esXpress

• VMotion and file on an ESX Server host

  Hello

  We have recently implemented 3 ESX 3.5 servers and configured HA and Drs However, I wonder for VMotion to work correctly, each ESX Server dns name and IP address must be in each box of ESX host file? My last company consultant put all the names of the ESX servers with IP addresses in the file for each host, but this time, the consultant does not. I was wondering if it is advisable or not?

  Thank you.

  KeV

  Hello

  You needn't name resolution for Vmotion. This is based on the Vmotion network, that use only Ip and default gateway addresses.

  On the hand of oter HA need DNS to work. Then you should be able to resolve host names in the bu cluster HA FQDN.

  Have a look here for best practices on HA-> http://www.yellow-bricks.com/2008/10/27/ha-best-practices/

  Best regards

  Lars Liljeroth

  -

• Move VMS between server ESXi and vSphere ESX server

  Dear all,

  I want to move some a vSphere ESX server virtual machines to ESXi server.

  I understand that some users will use CPS to move between the ESX servers, but apparently not for moving between different products.

  I'm just using a slow and prone to error method:

  The files of the virtual machine to my deskop PC of vSphere ESX server and then upload to the ESXi server.

  I would advise you to please all of the methods that is better than this one?

  Help, please.

  Kind regards

  Tommy

  If you got a central storage you can move virtual machines between the two products with vMotion. Since you don't seem to have available vMotion, you pouvez use scp. SCP has nothing to do with ESX/ESXi products. It is a Linux/Unix program which is available in both servers.

  So with the CPS, you need a little less.

  The syntax is like:

  SCP - r/path/to/vm/directory user@esxi:/path/to/new/location

  Concerning

• ESX Server 3.5 upgrade auf 4.1

  Hallo community values,

  ICH stehe vor einem is small problem und ich möchte euch einen overview binding kurz:

  • -2 x VMware ESX Server 3.5.0 build 130756 (Clustermode, Dell Poweredge M600, Xeon X 5460, 32 GB of RAM)
  • -12 VMs (Win2k3 + Win2k8)
  • -VMware Virtual Center Server 2.5.0.64228
  • -VMware Infrastructure Client 2.5.0.64228
  • -VMware Update Manager 1.0.0.63985

  Wie ihr an den Versionen seht, wurde das Szenario recht und ich darf nun hand dress is stiefmütterlich. Are das Ziel und meine Aufgabe ist, die sich infrastructure auf die aktuellste mógliche (ESX 4.1 ware dies laut ESX Compatibility Guide U3) zu heben. Planned do ware:

  • -Host ESX al auf ESX Server 3.5 Update 5
  • -Removal of guest VMs auf vCenter Server 4.1.0.17435 und der
  • -Update auf der hosts 4.1 U3
  • -Squad der VMware tools VMs auf den
  • -If necessary. Ein update the vCenters 5.5, muss ich mich noch inform ob possible ist dies auf mit den 4.1er hosts.

  Leider komme ich nicht sehr weit.

  Die Baseline as Update 5 is connected und ist mit dem Update Manager. Der ist im Wartungsmodus ESX host. Wenn ich "updates Auf prufen" go out ich das event "Fehler beim Prüfen von ESXHost auf updated" von dem Benutzer com.vmware.vcIntegrity.

  Die questions:

  WO ich hand dress should? Wo finde ich ein detailliertes journal zu den C.a.i.? There're zu der be possibly Tipps oder Anderungsvorschlage eurerseits do?

  Danke im Voraus.

  ICH sprach von Version 4.1 therefore, weil erwahnt oben the hattest "Das Ziel und meine Aufgabe ist es, die sich infrastructure auf die aktuellste mógliche (ESX Compatibility Guide ware ESX 4.1 U3 dies laut) zu heben". Durchgehend Wenn Version 5.1 (für die ESXi hosts, eingebaute Komponenten wie NW maps..., storage system) supported the ist, ist dies of course also possible. Die die aktuell probably VM mit HW Version 4 laufen should damit auch laufen (see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2007240)

  Die Lizenzkeys as ESX and ESXi sind die gleichen und wenn eine aktive subscription As (oder zum als vSphere covered at least 5 released wurde hattest) you can the uber das my VMware die auf die Version upgraden equivalent licenses portal.

  André

• ESX Server won't go into maintenance mode - Timeout

  We have 1 host ESX 4.1 support our view desktop computers. I tried to plan a reorganization of the host during the night, but jobs would not be the exit ramp leading to the maintenance task timeout mode.

  What will do to make desktop computers will be exit during this upgrade? I put all the desktops into maintenance mode before the host trys to remedy?

  Thank you

  Travis

  This part of a cluster DRS ESX Server? If not you will need to manually stop or vmotion the VMS to another ESX host before it can go into maintenance mode - if it's part of a DRS DRS cluster must be set fully automated so DRS can automatically vmotion the VMs before entering maintenance mode.