PFN_LIST_CORRUPT-BSOD

Similar Questions

• PFN_LIST_CORRUPT, BSOD. What can I do to fix this?

  Hello and thanks for reading.

  I was doing a BSOD for a few days now. I recently reinstalled Win 7, hoping to correct the error in this way. It did not help.

  I read on the forums here to the kind of research this problem until I posted. Some people say it could be the memory, so I ran a Memtest, and all checked.

  I have also seen where people were invited to publish their minidump files, so here they are:

  https://www.dropbox.com/sh/ma4xxyfcywtdw61/TCp3p7xbmc

  Are there any suggestions? I ran the Windows Driver Verifier ', which was suggested in another post, but the BSoD did not immediately after.

  If you need further information, I will be happy to provide, as much as I can.

  Thank you in advance for your help!

  AS

  Check in your DMP above has not been activated.  Please turn it on.

• PFN_list_Corrupt-BSOD, IRQL_less_or_equal, LeAPC_INDEX_MISMATCHErreur, Memory_mangement. Page_Fault_in_nonpaged_area

  Hello
  I'm getting several of the above mentioned blue screens. I've been troubleshooting by Googling the mistakes, but I had no luck.
  Specifications of the PC:
  Pentium Dual Core E2500 2.5 Ghz
  4 GB OF RAM
  Windows 7 Ultimate 64 bit
  GeForce 8800 GT
  I do not understand that the pc is a little older but the RAM is brand new and not that old hard drive no more (about 2 years)
  I did everything that is normally offered on this forum for similar problems.
  • CHKDSK /r
  • Memtest. I ran it for more than past 5 / 6 hours)
  • downloaded a provider's Web site hard drive controller and checked the status of my drive.
  • sfc/scannow
  everything came back without any error.
  The blue screen that appears to be more common is PFN_List_Corrupt. I downloaded Blue screen View and the file which is the cause
  (and all other blue screens) is ntoskrnl.exe
  Is there something else to blue screen I can provide, perhaps address, which will help find a solution?
  Here's the latest dump files:
  1. https://SkyDrive.live.com/redir?RESID=5AE939C6E0E525A7! 146 & authkey =! ADkHjFi1O2AX87g
  2. https://SkyDrive.live.com/redir?RESID=5AE939C6E0E525A7! 147 & authkey =! AM6O0eXq7V58ZCo
  3. https://SkyDrive.live.com/redir?RESID=5AE939C6E0E525A7! 148 & authkey =! AIZpoVyP6y0mAkE
  4. https://SkyDrive.live.com/redir?RESID=5AE939C6E0E525A7! 145 & authkey =! AK2Ov5grj3-FQPY
  Thank you
  Any help will be appreciated

  Hi Philippe,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you get a blue error screen.

  The problem may be because of the material.

  Perform the steps from the link below and see if it helps.

  Resolve stop (blue screen) error in Windows 7

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Hope this information helps.

  Answer to us if you are having problems with the blue screen or any other problem of Windows, and we would be happy to help you.

  Good day!

• Request for support for several BSOD in Windows 7

  Over the last 2 weeks, the computer broke down several times with different BSOD errors.

  The first BSOD was the IRQL_NOT_LESS_OR_EQUAL. I tried to re-install some drivers to fix the problem, but in vain. Errors are rather erratic and produce generally halfway to my gaming sessions.

  Using the view BlueScreen, NirSoft, I will list down the errors in chronological order. They are:

  16 Feb - 1: IRQL_NOT_LESS_OR_EQUAL (caused by ntoskrnl.exe)

  16 Feb - 2: BAD_POOL_HEADER (caused by ntoskrnl.exe)

  18 February: BAD_POOL_HEADER (caused by ntoskrnl.exe)

  19 Feb: PFN_LIST_CORRUPT (caused by Ntfs.sys)

  22 Feb: PAGE_FAULT_IN_NON_PAGED_AREA (caused by ntoskrnl.exe)

  24 Feb: IRQL_NOT_LESS_OR_EQUAL (caused by ntoskrnl.exe)

  Mar 1: PFN_LIST_CORRUPT (none specified)

  Relevant minidump files have been uploaded to:

  https://onedrive.live.com/redir?RESID=B3664A02E3311178! 250 & authkey =! AOL1nu3zgcjSWXs & ithint = % 2cdmp

  There is also a document .txt with all Bug Check parameters for each error. read somewhere that it might help.

  Can someone help me through all the mistakes to help solve my problem? There are quite a large number of files to dump downloaded due to the number of different accidents to date. Not sure where all are concerned.

  Thank you!

  You need the Seagate Seatools software:

  http://www.Seagate.com/ca/en/support/downloads/item/SeaTools-win-master/

• BSOD after using Driver Verifier

  Original title: pilot does not have the dump file

  Windows 7 64 - bit SP1 all updates in

  Intel i7 3770 K

  No graphics card

  ASUS P8Z77-V Pro/Thunderbolt

  Problems started with PFN_LIST_CORRUPT

  I ran the memory test several times without any problems. I ran full antivirus with MS dry Ess and AdwCleaner analysis.

  I studied the messages and articles regarding the use of driver verifier.

  When I run it, set up, restart, immediate BSOD but no file listed and no discharge minidump or generated memory.

  F8 annoys me for a secure start to reset.

  The only thing I can think to do is to select only some of the non-Microsoft drivers and keep trying to reduce it to the driver.

  Anything else I can do?

  To ensure the minidumps are enabled:
  Click Start, in the search box, type: sysdm.cpl, press ENTER.
  (In victory, 8 you can use the 'win' windows key + "s")

  On the Advanced tab, click on the Start button and recovery settings.

  Make sure that automatically restart is unchecked.

  Under the heading of the writing of debugging information, select partial memory (256 KB) image in the drop-down list (varies from 256kb).

  Ensure that the Small Dump Directory is listed as % systemroot%\Minidump.

  OK your way out.

  Reboot if changes have been made.

  If the minidumps are still not created, check these reasons as to why that may happen

  For landfills to produce what follows must be correct

  Paging file must be on the same drive as your operating system

  The basic file size must be greater than the physical RAM installed

  Windows Error Reporting (WER) system service must be set to MANUAL

  Value file system run on the operating system drive

  The value of options/crash recovery system "kernel memory dump".

  User account control must be running.

  Sometimes the SSDS with an older firmware are not DMP (firmware update)

  Applications like Ccleaner cleaner remove DMP files to avoid them until you're fixed.

  Source:

  Blue Screen of Death (BSOD) created by ZigZag3143 (MS - MVP)
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

• Error BSOD BAD_POOL_HEADER "based EQUALITY DRIVER_IRQL_NOT_LESS_OR MEMORY_MANAGEMENT"

  Original title: Win7 - several daily BSOD.

  Several times a day I'm especially crashed with a BSOD, but it freezes sometimes "simply".  I did a disk check and a memory test.  I can go back to last August, but I suspect that will not work, because it hangs in Mode safe and even crashes if I run Linux on a CD.

  I see a different reason for each accident, in the window that opens after the re-login, the BSOD is not always tell me why, but they were all multiple:

  BAD_POOL_HEADER
  DRIVER_IRQL_NOT_LESS_OR-EQUAL
  MEMORY_MANAGEMENT
  PFN_LIST_CORRUPT

  I received this "ROM" only once to a BSOD: "win32k.sys attempt to write in ROM.

  But I got a warning ROME to each logon for the weeks severak.  RAID screen said: "WARNING: have the option ROM cannot be invoked"and it "feels" simply as a problem of memory SINGLE stock holding still during the last weeks. " (Click to open an email in Outlook can get me the circle of rotation as long as 30 seconds)  This alert has disappeared as I was trying to bugs BSOD.

  All my files are in a unique OneDrive zip archive.  I've included the STOP codes that I get when reconnected (txt file), the dmp and xml files... two zips and a text file in a single archive.  There are fewer than I expected with so many accidents in the txt file.

  http://1drv.Ms/1jYLCAi

  Thank you

  Mike

  You probably face some form of a conflict between Norton and the module (Vipre AV gfibto.sys) listed below, and this can lead to problems of corruption... See if you can remove the two and replace Norton with Microsoft Security Essentials.

  Norton Removal Tool
  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  Microsoft Security Essentials.
  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  8aeb6000 8aeb7a80 gfibto gfibto.sys Thu Sep 01 21:29:13 2011 (4E603169)
  http://SystemExplorer.NET/file-database/file/gfibto-sys

  8aeb6000 8aeb7a80 gfibto T (no symbol)
  Loaded symbol image file: gfibto.sys
  Image path: gfibto.sys
  Image name: gfibto.sys
  Timestamp: Thu Sep 01 21:29:13 2011 (4E603169)
  CheckSum: 0000DF11
  ImageSize: 00001 has 80
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

• Receive lots of BSOD due to ntoskrnl.exe, they stopped, but started again after a month

  I get lots of BSOD. I installed "WhoCrashed" and analyze the dump files. Here's what he said:

  Saturday, October 3, 14 17:29:30 GMT PM your computer crashed
  crash dump file: C:\Windows\Minidump\031014-15147-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
  Bugcheck code: 0x4E (0 x 0x2007E, 0 x 2, 0 20075, 99)
  Error: PFN_LIST_CORRUPT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the page frame number (PFN) list is corrupted.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I have this problem for a long time. I've updated the drivers, windows updates, no effect. But, for some reason, he did not seem since February. But Monday, I used MiniCygwin_GOptimize_v1.34.02 to compress files apk android. He uses a lot of CPU. And after that the BSOD began to reappear. I downloaded the Minidump file and Information System if someone wants to check.

  Let me know the reason for these BSOD and how can I solve this problem.

  Hello

  We have many bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {5003, fffff780c0000000, 6933, 64ba0002d266}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is probably a hardware error.

  We also have another 1st parameter:

  Error checking 1 a, {fffff6800005cf40, eab00001beb34867,403, fffff6fc00df59a0}

  - Parameter 1 of the bug check is 403 which indicates the page table and NFPs are out of sync. It is also probably a clerical error.

  ^^ Pointed out that both of the above can still be caused by a driver causing corruption, but it is generally unlikely.

  And another...

  Error checking 1A, {41284, 159a0e001, 104 d 57, fffff70001080000}

  -1 setting of the bug check is 41284 indicating a PTE or the fixed work list is corrupted.

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffff8a00b91df40, fffff8a00b91e020, 50e040c}

  6: kd >! pool fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown
  fffff8a00b91d000 size: 4 d 0 previous size: 0 Ntff (allocated)
  fffff8a00b91d4d0 size: 30 size: 4 d 0 PfFK (allocated)
  fffff8a00b91d500 size: 30 size: 30 PfFK (allocated)
  fffff8a00b91d530 size: 10 previous size: 30 (free) NtfE
  fffff8a00b91d540 size: 30 size: 10 Ntf0 (allocated)
  fffff8a00b91d570 size: size previous 10:30 (free) Nbmc
  fffff8a00b91d580 size: 40 previous size: 10 DxgK (allocated)
  fffff8a00b91d5c0 size: c0 size previous: AfdX (protected) process (allocated) 40: fffffa801098c7f0
  fffff8a00b91d680 size: 170 previous size: c0 MPsc (allocated)
  fffff8a00b91d7f0 size: size previous c0: 170 FIcs (allocated)
  fffff8a00b91d8b0 size: 40 size: c0 (allocated) NtFs
  fffff8a00b91d8f0 size: 30 size: 40 (allocated) PfFK
  fffff8a00b91d920 size: 30 size: 30 Ntf0 (allocated)
  fffff8a00b91d950 size: 150 size: 30 FMfn (allocated)
  fffff8a00b91daa0 size: size 160: 150 FMfn (allocated)
  fffff8a00b91dc00 size: 40 size: 160 (allocated) MmSm
  fffff8a00b91dc40 size: c0 size previous: 40 FIcs (allocated)
  fffff8a00b91dd00 size: 10 size: c0 sect (free)
  fffff8a00b91dd10 size: 170 previous size: 10 MPsc (allocated)
  fffff8a00b91de80 size: size previous c0: 170 (allocated) NtFs
  * fffff8a00b91df40 size: size previous e0: c0 (free) * FIcs
          PoolTag FIcs: Context of FileInfo FS-Filter binary stream: fileinfo.sys

  ^^ Block of pool who looked in the page pool belongs to the context of FileInfo FS-Filter flow. This is related to the file system.

  6: kd >! poolval fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown

  Validation of the headers of pool the pool page: fffff8a00b91df40

  [Fffff8a00b91d000] page pool is __inVALID.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  2: kd > fffff960000a874f ln
  (fffff960'000 a 8720)   win32k! NextOwnedWindow + 0x2f |  (fffff960'000 a 8770) win32k! xxxRemoveDeleteMenuHelper

  ^^ The exception is produced in win32k! NextOwnedWindow.

  -----------------------

  Overall, this looks like the faulty RAM. It's not like there is a foul-smelling waters driver causing memory corruption here, but it is possible. The reason I mention this is because I see it in the crash dumps after dumping the! v

  OVERLAPPED_MODULE: Address overlap 'WinUsb' and 'ssudbus.sys'.

  ^^ WinUsb.sys - pilot class USB Windows system, it is a part of Windows. ssudbus.sys-

  SAMSUNG USB Composite Device Driver. Probably a part of Samsung Kies. Uninstall everything that you can find this topic.

  -----------------------

  Please run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• BSOD help (ntoskrnl.exe)

  I recently built a new computer for the first time and I am constantly a BSOD.  After consulting the minidump via the blue screen view files, it refers to the ntoskrnl.exe as the cause, but I suspect that maybe it's a corrupt driver (I could be wrong but).  Due to my lack of experience on this subject, however, I have no idea on how to identify the guilty and so need help.  As a result, I posted a link below containing the minidump files created by my computer and wish for some assistance on the interruption of information (any help would be greatly appreciated).

  http://www.mediafire.com/download/khtsg34cxn75t41/minidump.zip

  Thank you
  WildThing0079

  Great, thank you very much.

  We have various bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list. However, this bug control seems as frequently when there is a defective material, most often RAM or HARD disk.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1 a, {41287, 0, 0, 0}

  -1 setting of the bug check is 41287 indicating an illegal page fault occurred while now fixed synchronization of work.

  * Addition 41287, we have also the 1st parameter is 403 which indicates the table of page and NFPs are out of sync. It is probably a hardware error, although the device driver causing corruption is possible as well.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also cause this error, as a corrupted NTFS volume can do him.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  -----------------------

  1. AppleCharger.sys is listed and loaded, this is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  He is well known to cause BSOD, so please delete it as soon as POSSIBLE.

  2 even with gdrv.sys, which is the easy profit from Gigabyte - mobo utility power driver. Remove as soon as possible.

  3 remove and reinstall Kaspersky with temporary Microsoft Security Essentials for troubleshooting purposes:

  Kaspersky - remove http://support.Kaspersky.com/common/service.aspx?El=1464

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• The last 3 months of several BSOD and much more

  OK I know there are hundreds of help with BSOD files I should know I've read most of them.
  All started 6 months ago, when I thought I was installing an update of flash player. Almost immediately after the computer system crashed. It turns out that I had installed several small progs trial including, my pc backup I deleted immediately, another 6 months I always get emails from their part not bad because I never opened the program.

  So my problems began with a couple bsod intermittently until, about 3 months when I swear that the bsod was lined up waiting to strike.

  I did a lot of reading upwards, for which I managed to fix many of the bsod of but not all. On the advice of many forums including this one I did a clean install of windows 7. I have 3 partitions, c and d & e and what happened then is beyond me.  But I will not go into that now. This facility was doomed from the start as I did another formatting all partitions.

  After restart of the installation but I have set the time and date and bsod. Soon managed to untangle. Was a driver for mass storage and a stranger. This brings us today, the unknown device driver Sony firmware extension parser device was. So for 15 minutes, my pc ran without problem then a bsod error page then error 1084 and 1068. Me, windows cannot verify the digital signature for the drivers required for this device. It's the Sony firmware extension parser device. Code 52. I can't find any help on this.  Then intermittently, I have a problem with my video screen, which I have lost it, depending on how it starts the 1st time happened I did a clean boot and got to the login page and my screen went bright 20% or so Sun have come very close to the screen.

  Doing a selective start up with SS & with original boot and hkcu\ "" '\current version\run off solved the problem. 1st time today start screen is gone, that's why we came. Without changing a thing screen goes dim then will get a bsod. .. D1, f4, & earlier, a new total, pfn_list_corrupt. Oh and at every restart in SafeMode the screen returns.

  I often get the bsod of failure to page, otherwise I'll get a different one each time.

  Everything above was written on my mobile, had more but it seems that when you go to another page and come back all this resets, whats that about?

  OK, so the error checking is the cause of all my restarts and bsod since clean install (2 days ago) have had 10, and the BCCodes are... 3 b, d1, 19, 7th, 7f, 1st, 50, d1, f4 & 4th had error 1084 & 1064

  
  

  What have I done? has ran chkdsk /r scan chkntfs system and a couple more that I found here.

  Also Windows Security Center is disabled and can't start...

  Help, please

  Thank you

  Leeingrove

  To disable the auditor auditor/Reset type.

  Two of the three DMP (the third link does not work) are related to the material.  I would like to run chkdsk, memtest, prime95 and furmark, to find out what the material is failing

  1-Memtest. (You can learn more about running memtest here)
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  If a well-known stick fails in a card mother slot but not an another is probably the slot.

  CHKDSK /F /R
  
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
  Run CHKDSK /R /F from a high command (run as administrator).
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

  Try this free stress test: http://www.mersenne.org/freesoft/

  
  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.
  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  FurMark Setup:

  -If you have more than one GPU, select Multi-GPU during installation
  -In the run, select "Test of stability" and "Journal of the GPU temperature.
  Click on 'Go' to start the test
  -Run the test until the temperature of the GPU maxes - or until you start to have problems (whichever comes first)
  -Click on "Exit" to exit

• Several BSoD errors a day, passing under power and off for about a year now. All seem to be pilot/registry problems. (Alienware X 51 R2)

  For about a year now, I been dealing with errors in the screen and blue on my desktop Alienware X 51 R2. They produce several times when you first start the computer for the day and then work as usual for the rest of it. They tend to happen off and on again, stopping for a month or two and after. I went to many other forums for help with no luck. All of them seem to point to pilot/registry issues, such as PFN_LIST_CORRUPT and KERNEL_SECURITY_CHECK_FAILURE. I can never identify the problem, because whenever I think I fixed it they begin again a few weeks later. And this time, he had some freezes that act exactly like a BSoD without displaying the blue screen. Please help, I have no idea what is happening. He will also sometimes starts, beep, cut and repeat up to random point when he decides to work.

  Minidump ZIP

  My wife and I have two machines R2 Alienware X 51 and both machines have started this behavior about a month or two after the expiration of the warranty.

  After several tests it turned out that one of the sticks memory is faulty, although it shows still 8 GB of ram in the system specifications.

  I replaced the two ram machines with kits of Kingston hyperX 8 gb dual channel and both machines worked perfectly since then.

• BSOD and reboot loop

  Last night, I was just using Facebook as usual and bam, BSOD.  When I tried to restart, it would reach a point about halfway through the apple logo, go to a gray screen, then restart again.  After several tries to restart, I finally restarted in verbose mode, noticed anything weird and it finally started raising but very slowly.  I went to my console to see if I could find anything unusual and I found the repetitive lines of the following:

  kernel [0]: sandbox: appleeventsd (47) deny metadata-reading-file/library

  In addition, 8 lines of this:

  kernel [0]: sandbox: appleeventsd (47) deny com.apple.ocspd mach-search

  What does that mean and can I do about it if it does not happen?

  Have you tried to restart the console recovery and repair of permissions? I have not found anything specific related to these errors.

• After uninstalling and reinstalling 42.0 FF, I get BSOD 0x000000F4 error

  FF has been excruciatingly slow and constantly crashed. I tried to reset, but does not solve the problem, so I did a uninstall and reinstall. Now, I get the BSOD every day, stating that "a process or thread crucial to system operation has unexpectedly released or terminated" and noting that the problem is often caused by the problem with newly installed hardware or software. FF is the only new software that I installed it. I have not installed new hardware. The stop error is always the same: 0x000000F4. Thanks for your suggestions you may have.

  Thanks for the suggestion, Kyle. I uninstalled and reinstalled FireFox and did not get a BSOD. It only 24 hours since I've done this, but so far, everything is fine. Thanks again!

• BSOD 0X000000B8 HAL. DLL Repeadly only occurs when I use Firefox v40.0.3

  I get a blue screen of death every time I use Firefox v40.0.3 and it ONLY occurs when I use Firefox.
  Code: 0x000000B8
  Attempt to pass of the CPD
  Flaws Driver == > HAL. DLL
  Each BSoD has the same error data.
  Windows XP SP3 all the drivers the most recent and running stable 3ra for this problem.
  Intel Core 2 Duo 3.33GH
  4 GB memory
  WD 320 GB SATA drive
  latest drivers nVidia Quadro FX580
  HP xw4600 workstation
  I have tried everything I can think of, like turning Hardware Acceleration power
  What other programs I makes no difference running at the same time or what I'm doing. It happens that while I use Firefox. If Firefox is loaded in the background, but I do not actively use it, the BSoD doesn't happen.

  Resolved.
  The BSoD was caused by the WiseTdiFw.sys file that is installed in the C:\Windows directory by the system monitor sage v1.3.5.31. When this file was not able to load the BSoD stopped.

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• Firefox hangs (?.) BSOD) (/ questions/971282)

  For this last month that my computer has been lock up intermittently during the night. I traced the
  Firefox worm 26 problem. Sometimes the cursor will slow down and then freeze while using Firefox. The computer is completely enclosed and necessary for a hard reset. I installed the latest beta 27. Now, Firefox crashes for the BSOD. I need to resolve this problem quickly. There are questions killer deal with all other browsers, but they all work and do not freeze.
  Windows 7 64 bit
  8G memory
  256 GB, 1 TB HD SS system disc
  Intel Q9950
  MB GIGABYTE.

  Blue screen crashes are rare and usually require an incompatibility with driver graphics card. Launch Firefox in its Safe Mode and disable hardware acceleration.

  Hold down the SHIFT key when you start Firefox

  In the small dialog box that appears, click on 'Start mode safe' (not Reset)

  The orange open Firefox button (or Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  While you are in the settings view, disable all non-essential or unrecognized modules on these two tabs:

  Firefox orange (or the Tools menu) button > addons > Plugins category
  
  Firefox orange (or the Tools menu) button > addons > Extensions category

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.