PFX ceritifcate with the same alias in the keystore appears twice with different certificates

Similar Questions

• Make sure you separate words/labels to the title appear at times different CS5.5

  Hey,.

  I'm wanting to create labels to separate text for different words House on a title and I'm eager to each word to appear at a different time.

  I was curious to know if this is possible with this software and if so, how?

  Thanks in advance,

  A few choices of method, depends on exactly how we want him for the words/letters see.

  Here is an example of a possibility, with step by step with Photoshop.

  The Setup is that we want a title, with three lines of text, one line after another, leaving the previous on-screen text.

  1. In Photoshop, make the new Image to the file in the toolbar.
  2. One of the video presets, choose from the drop-down list, say HD 1920 x 1080 w / Guides.
  3. Before you click OK, verify the background is set to Transparent.
  4. Use the text tool to create your three short lines of text, color and with the police, you want. Each use of the text tool will create a new text layer.
  5. Use the alignment and Distribution in PS tools to get the arrangement, the three layers of text, you need/want.
  6. Save_As PSD, keep these three layers of text on backgroundTransparent.
  7. In PrPro w / 1920 x 1080 HD sequence (note: match the new Image preset to match any existing sequence - the 1920 x 1080 is just one example.)
  8. Import the PSD as a sequence, so as to NOT flatten layers.
  9. This will bring the new title sequence in the project Panel, and then you can open it to reveal the layers in the PSD.
  10. Drag them to the video tracks (above any video, or VT 1 up to 3 VT) and change their life to what you need.
  11. You can compensate for them, for the moment, or can adjust that, with keyframes. I like compensation, just so that I have a visual reference.
  12. Now, it's decision time. For example, I decided I want the three lines of text to fade in the place that I've created. I'm going to Keyframe the fixed effect > opacity to achieve this. I like doing that in the effects, with the individual text layer selected Clip Panel. (Note: you can use many effects, depending on what you want and also combinations of effects, all two fixed and applied - your imagination is the only limit.)
  13. All three layers of text have opacity to 100%, and this is where we want them to end up, but we start our first layer to 0% opacity. Before you do this, decide where in time, you want it to reach 100%. A keyframe of opacity, set of animation switched TO opacity. We now have the opacity to 100% from this point to the last frame of the Clip text layer.
  14. Go to the first image and add a keyframe of the opacity. That set at 0%. We now have a linear gradient, FRO 0 to 100%.
  15. You can change the linear nature, with curves of Bézier applied to keyframes. For all these permutations, I highly recommend the help file. For now, we will leave things linear, with a constant speed.
  16. If shift you the text layer Clips, you will do exactly the same thing. If not, then you just want to add a keyframe 100% more far along in time and place to go to the first image, go where you want opacity to start to go from 0% to 100% and place a keyframe, set to 0% opacity. What you have done is set the initial opacity to 0% for the time until the first keyframe, and opacity changes until it reaches 100% keyframe.
  17. Repeat for the third Clip of text layer.
  18. Fact.

  Good luck and hope that helps. Don't forget, many effects can be alterations to change over time. We could have done similar with the added effect > Gaussian blur.

  Hunt

• Color and/or modes of merger and/or the effects appear to be different between AE and SOUL

  First of all, I'm relatively new to CC.  Until now I am almost exclusively in love.  One thing I'm not too happy with that is the need to use the Media Encoder in After Effects to render to "broadcast formats.  I guess I understand global change, but it is annoying when you do iterative work of customer.  "Just use the Media Encoder!"  Right!  However...

  I use a lot of additive mixing in 32 bits.  It looks different if I make in After Effects vs the Media Encoder.  The Media Encoder does not manage correctly the "clearer".  Things are not "bloom" to white as they do in After Effects (and, especially, the way I want what they).

  Something is twisted?  I understand some related to the color adjustment or blending modes?

  It has never worked right since SOUL was introduced. You need make an intermediate file to convert to SOUL when working with 16-bit or 32-bit even.

  Mylenium

• ORA-01810: put the code appears twice

  Hi all
  
  I do an insert statement and one of the values is a timestamp column.
  
  I put to_timestamp (October 11, 10 10:42:06, 309000 ',' dd/mm/yy HH24:MI:SS.) FFFFFF') and pops up the error ORA-01810
  
  What's wrong?
  
  Kind regards
  dbajug

  You must only specify FF once...

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/functions193.htm#SQLRF06142

• Several members with the same alias

  I have several members with the same alias name. Is there anyway to build the dimension with the same alias name members?

  In general, I'm going to concatinate the member name (as a prefix or a suffix) to Alias to make it unique

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• keyboard on laptop display does not upward with the typed word. While I'm typing, letters on the screen appear at the same time very slowly.

  When you type in any program, my keyboard entries appear VERY SLOWEY on the screen.  I can type a whole sentence and sit and watch the letters appear on the screen, one at a time per second or more.  It happens on my Gell with XP running

  Hello Ron Snell,

  Thank you for your message.  We will perform a clean boot and a test to see if you still get the same results.  A clean boot to start your computer without any 3rd party applications, this way we can test to see if there is another application that may be the cause.  If your system runs well for a clean boot, you will need to test your applications one at a time to find the culprit.  Clean boot instructions are found HERE.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How many user take RDP at the same time with different user login ID in Server R2 2012

  How many user take RDP at the same time with different user login ID in Server R2 2012?

  How many user take RDP at the same time with different user login ID in Server 2008 R2?

  How many user take RDP at the same time with different user login ID in Server 2012 starndard?

  How many user take RDP at the same time with different user login ID in Server 2008 standard?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Install Windows 7 on the same computer with different drives

  I plan on building my first computer soon and I want to run Windows 7 Home Premium.  If I install this version of Windows 7 and that I update the processor or hard drive later, I'll be able to install it again? http://www.Amazon.com/Windows-premium-64bit-System-Builder/DP/B004Q0PT3I/ref=sr_1_1?ie=UTF8&QID=1348592929&SR=8-1&keywords=Windows+7+Home+Premium

  One of the comments said that Windows 7 is is only related to the motherboard, if I want to get a couple more opinions.  Thank you!

  Upgrading the hard drive won't be a problem. Simply create a backup of the Image the old drive and restore to the new drive.

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  ==============================================

  Change the CPU may require a different motherboard, so if you change just the CPU using the same motherboard, you may need to reactivate over the telephone.

  However a "of System Builder (OEM) version of Windows 7 is related to the first motherboard install you it, so if this CPU upgrade also requires a different motherboard / new then the Integrator version will be more usable (will activate not)."

  ==============================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Using clips with different frame aspects and pixel in the same project

  Hello

  I have two clips:

  clip1: AVCHD 1440 x 1080 and the rationing of 1.3333 pixel aspect (the ratio of the image is 4:3)

  Clip2: AVI 720 x 576 pixel aspect ratio of 1.0940 (the ratio of the image is 5:4)

  I want to use the two clips on the same project.

  I chose a project suited to the preset clip1. (in this case most of my images will be of this format).

  If I do not make any changes to the elongation of pixel (using the Interpret Footage) the result is that the letter boxing serves around clip2. It is acceptable but not ideal.

  Can I change the format of clip2 pixels so that it is the same proportions as clip1? If I do this but I don't eventually clip2 distortion? What would be a worse result than the current situation with letter-boxing.

  Can someone advise; is it possible to merge these elements from two sources into a single output seamless file?

  With our thanks

  -Justin Wyllie

  Justin,

  If the IRON Clip 2 (size of pixels) is correct, i.e. the film doesn't look like stretched or squeezed, I wouldn't do any adjustment to that.

  To reduce or completely remove the black borders around it, you can adjust the fixed effect > Motion > scale, to fill the large size of the frame. Note: due to the difference in image format, to fill the full scope of the project, you will be actually reframe some of top and bottom. Using the fixed effect > Motion > Position, you can adjust exactly where culture goes, say all high, or to all of the background, or by a different ratio of high & low. This choice must be based by the framing of the topic in Clip 2. This choice is yours.

  Note: when scale upwards, quality will decrease, but maybe not too difficult to use only images, but the decision is yours also. There are several programs, and some that are plug-ins, this top-floor a little better than the Motion > pre scale. I would investigate those. One Magic Bullet Instant HD Red Giant, was used by many, even if some users were not enough to buy the pleasure. Just something to consider.

  Good luck

  Hunt

• Both adf shares VO even with different params on the same screen

  Hello everyone,
  My current problem is that I need to create a screen with several sharing the same VO graphics but with different settings for each of them.
  Lets assume I want to use EmployeesVO to show the 2 graphs on the same page jspx.
  A chart will display all the salaries of employees for the "Marketing" Department and the other will show all the salaries of employees for the Department 'IT '.
  Remember, I want them both on the same screen.
  The read-only VO will look like this:
  SELECT First_Name
  Salary
  Employees
  WHERE department_id =: p_dept
  
  To do this, I did the following:
  For each graph, I created an iterator.
  For each iterator I created an ExecuteWithParams. (a receiver "Depto Marketing" and anther receive "IL Depto")
  For each ExecuteWithParams, I created an InvokeAction.
  
  When executing the application all the graphs show the same information. All of them show only one (the last in the list of executables InvokeAction) Department.
  
  The question is: how to keep each graph has their own parameter on the same screen?
  
  I use Windows 7 x 64 SP1 JDeveloper 11.1.2.1.
  
  Thanks in advance!

  Why not add 2 instances of the same original version of AM. For each instance of defined the different VC.