pgfFmt.Start property does not

Similar Questions

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• HP Pavilion 6330: Start Menu does not start

  I have just upgraded to Windows 10 last week. Everything was fine until tonight. Now, my Start menu does not appear.

  Hi there @srazzle922,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that the Start Menu no longer appears for you a week after the upgrade to Windows 10. I'm happy to help you with this. Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  It worked fine for a week, it is possible that some recent update, led to this parasite. Try a system restore to a point before the problem started if possible. Computers HP - using Microsoft System Restore (Windows, 10, 8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Windows Start menu does not

  Hello

  I use Windows 2010.  My windows start menu does not work. It appears, but I can't click on anything whatsoever. The cursor is in the search box, but I can't type anything.  I downloaded Frostire 5.08.08 and updated Java this morning.  It's the only thing I did differently.  Help, please.

  Thank you.

  Michele

  Hi, sorry, I rebooted my pc and it works now.  I also worked that I use WIndows 7.  Thank you and sorry.

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.

• Start button does not work and turns off all the icons

  Hi there, I try to open my Start menu does not work, and all my turns off desktop icons. I don't know what to do and I really have a hard time with these two problems. Any help would be great.

  I try this method and none of them work

  I have AVG Antivirus, I run it twice but nothing found

  I also run sfc/scannow in cmd promt twice, but it is 100%, nothing wrong here

  Any other comment, please help

  Much Apprecciate

  Do not have access to Safe Mode if you ignore the system restore and click on the button on the Start Menu?  Your initial problems are repeated in this case?

  If you can access Safe Mode things, see if it will help you create another user, and it will allow to test this new user in Normal Mode of loading.

  Also, if you can in Mode safe, download and run this program in mode safe mode and let it scan your computer for malware.

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  Try this mode safe too.  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  If Safe Mode is not an option for you, see if you can access options of startup repair (be it to start any Windows Vista DVD or the Safe Mode screen options).

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See if you have any DVD installation or another way to run the Startup Repair tool.

  Windows Vista download Recovery Disc
  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  If you still have problems after all that you can post back and we'll consider a data restore and reinstall options.

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Application does not start and does not respond. Closed that it self.

  Hi guys

  I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.

  To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.

  Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."

  I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...

  Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)

  Thank you very much!

  OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.

• Software for printer C410 starts but does not load.

  Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

  Try to run the installation once more

  Once to reach the license not agree, click on the link 2 (use of connection Internet

  Make sure that both options are defined as no, thank you, approve and proceed with the installation

  You see no progress

  If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

  Specify as detailed as possible, a screenshot can help to understand better as well.

• Windows 7 Starter Edition does not recognize a hard drive WD

  Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

  Thanks for the reply.

  There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

  I managed to fix the problem after:

  -J' scanned the computer (DELL Inspiron) with the Safety Scanner
  -J' completely uninstalled all the software associated with an external hard drive
  -J' uninstalled the USB controllers
  -reboot the system
  -reconnected the external HD
  -After gaining access to the drive, I installed the dedicated software

  Best regards

• Inclination property does not refresh

  Hi all

  I have this problem with cc animate on PC, win 7 (it's also happens in older versions of flash)

  Basically if I select a chart and Flip Horizontal (Fig 1), the Committee "transform" show me "180" in the property "skew" (photo 2).

  

  

  But if I deselect (photo 3) and select it again (photo 4), the "skew" property does not show me any value. But I know that the value must be "180".

  

  

  In order to 'see' the good value, I need to manually select the offset box, and it seems good value (PHOTO 5).

  

  If I try to select the object 10 times, only 2 times he gave me the value, all other attempts gave me a 0.0 or nothing

  It is very annoying, because I often work on files created by me, so I can not go on each item and check manually IF is returned or not.

  I'm working on different pc and it happened also in older versions, so I know not isn't an installation problem.

  Can anyone help me understand why this has happened? and or solution for this?

  Thank you

  Luca

  Hi Luca,

  Thanks for the detailed report. Will review and update you as soon as we get a fix. It seems that this only occurs if you select an object, if any other object/form is already selected for example, does not produce when you move the selection of an object to another. You can use this workaround until it's resolved.

  Thank you!
  Mohan

• BPEL migrated from 10 g and 11 g - idempotent property does not

  We have migrated the process BPEL of 10g and 11g.

  But the idempotence property does not work after migration. in BPEL Engine-> recovery the instants beneath Invoke instead of the type of activity .

  A composite.xml of migrated BPEL process looks like this:

  ...

  < ui:wsdlLocation = "reference Some.wsdl" name = "SomeWS" > "

  " < interface.wsdl interface =" "' http://foo/bar/SomeWS#wsdl.interface(SomeWWS) ' xmlns:ns = ' http://xmlns.Oracle.com/SCA/1.0 "/ > "

  " < binding.ws port =" " http://foo/bar/SomeWS#wsdl.endpoint(SomeWSService/SomeWS)" location = "Some.wsdl" xmlns:ns =" " http://xmlns.Oracle.com/SCA/1.0 "> "

  < property name = "idempotent" > false < / property >

  < binding.ws >

  < / reference >

  ...

  11 g (or 11.1.1.7), there is a new option to set the properties of "Idempotence" on the link associated with the level of the operation.

  Example of composite.xml

  ...

  < component name = 'Some' version = "1.1" >

  < implementation.bpel src = "Some.bpel" / >

  < name = "bpel.partnerLink.Remotews.writeSomeStuff.idempotent property" type = "xs: String" much = "false" > false < / property > "

  < name = "bpel.partnerLink.Remotews.writeOtherOper.idempotent property" type = "xs: String" much = "false" > false < / property > "

  < / component >

  ...

  Following ownership structure: bpel.partnerLink. < partnerlink-name >. < operation > .idempotent

  Functioning of the is the only thing that works in SOA Suite 11 g 11.1.1.7 / BPEL 1.1?

  Ignoring the name of the operation seems to work, then from the above example (where "Remotews" is the name of the partnerlink):

  fake

  I think the 10g to 11g migration Assistant should have corrected it, or at least given a warning about the property is not managed by the migration. A migrated process lose all points of dehydration if it is not set manually.

• Content of the start page does not load in 11 IE or Chrome - RH11

  We went to RH11 specifically to solve the problem of known IE11 we had while we were running RH9.  When I installed the software, I applied all available patches, now at 11.0.2.240.  But when I try to generate a WebHelp project, in the output, the TOC loads, search bar charges, but the main content of the start page does not load.  Very similar to the old question of IE11.  It happens on both files the to this virtual machine and when they are responsible for the intenet.  My operating system in Windows 7 (as so far).

  Someone at - it suggestions?

  Ah ha.

  Worked well with an example project.

  Took a look at my files... the start page is a legacy file that has been through several versions of RoboHelp, at one point he somehow must have obtained some of the javascript HR calls in there - took the javascript code for the file, rebuilt and everything works again.

• Hello, "set as Start Page" does not work for me. Anyone has any idea why?

  My "set as Start Page" does not work... anyone know what I can do?

  Thank you!!

  So, you tried to set the homepage under areas of site?

  What is now your start page?