Phone network Orange UK and HttpConnection speed
I have real problems with phones on the speed network and connectivity Orange. Take the duration of the request to the server can be a very very long. I tried doing a tcpdump on the server and time set by the server see the HTTP of the time I make the request on the mobile.
To sort the problem that I coded a thread in my application that timeout connections HTTP after 30 seconds and displays a message to the user indicating the application has forced a timeout, but sometimes the HTTP request will hit the server even after this time-out of 30 seconds has occurred. and cancel the http request. This leads to my poor users of course become confused. I'm assuming that packets are on the network Orange somewhere before being sent, but 30 seconds + seems ridiculous.
Really I wonder if anyone else has seen/experienced similar problems on the Orange network?
Kind regards
Alan
According to the code of connection java that you picked up, you try to use the BIS-B. This isn't the code that I use when using BIS - B, so I'm not convinced that it is correct. Anyway, to use BIS - B, you must request access to the RIM. BIS - B is routed over the RIM infrastructure, when you ask to provide volume and the URL information, I suppose that they monitor access. You can find more on the subject, from a completely independent source, by reading this:
http://www.naviina.EU/WP/BlackBerry/the-magic-string-BlackBerry/
If you have not requested access BIS-B for your application, I suggest that you try another method of connection.
Tags: BlackBerry Developers
Similar Questions
-
Network slows down and stops receiving data the halfway during the loading of a site or downloading
In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.
Hello
· Did you follow all the methods provided?
· You are using cable or wireless network connection?
Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.
If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.
Method 1:
You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.
Reference:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Method 2:
Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:
a. open windows command prompt
b. Click Start - Run-type cmd and press enter
c. to release your ip address ipconfig/release , press Enter
d. to renew your ipconfig/renew IP address
-
Network host adapter and the status of the connection
Does anyone know the property of the object to get the host 'Link Status' network adapter?
I can get the name of the NETWORK adapter and the speed duplex but nothig on the status of the connection
Thank you
You can not get the status of link directly (as far as I know).
You can detect the status of "link down" through the linkSpeed in PhysicalNic object property.
You can use something like this
(Get-VmHost
| Get-View).Config.Network.Pnic | %{ if($_.LinkSpeed -eq $null){ Write-Host $_.Device "Link down" } } ____________
Blog: LucD notes
Twitter: lucd22
-
My phone has been hacked, and what should I do to ensure that my account is blocked?
I received a message below on the home screen (before I unlock it) from my iPhone and iPad. It seemed strange to
me because the battery upward at the top right is in color and it's prompting me to e-mail to a gmail account. When I received this message, it triggered an alert «I lost my iPhone/iPad» I tried to access my icloud and he stated that it was inaccessible. I turned off the camera and turned it back. Then I changed the password on my icloud account and have not had a problem so far. My phone has been hacked, and what should I do to ensure that my account is blocked?
< image edited by host to remove personal information >
Your iCloud account is compromised and the criminal who did it trying to extort the money from you.
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
-
I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...
iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher. Update of the system only checks the updates for the current version of the system you run, but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM. Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion
Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
-
I am trying to sync my contacts from my iPhone to my new computer email how I do I plugged my phone into my computer and he asked to do everything but synchronize the contacts that I have a hard time with 10 windows, that's for the younger generation
If you synchronize contacts using iCloud, you cannot synchronize them in iTunes. More information would be useful.
-
Phone has stopped hanging and vibrating when I receive new e-mail
My 6s phone hung recently arrested and vibrating when I get my new messages. I have reset all settings and also saved and restored the phone without success. All other apps work like alert messages, only problem with the mail application.
Any help would be greatly appreciated.
If your sounds and notifications are defined correctly and do not disturb is not on then try to reset the mail application.
First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. You may need to search the mail pane covering scribbles to the left. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.
-
FireWire 400 and 800 speed question
I recently bought one of these cords off of eBay for a few dollars. I have an old external WD which was connected by usb 1.0. I thought I could get more speed with this cord, but I get all the same read and write speeds of close to 23MBS.
Any ideas why the speed is slow? Cord? By car?
Thank you!
USB 1.0 MAX is 12 Mbps, which is 1.5 Mbps. (b = bit, B = byte [8-bit]).
FireWire 400 MAX is 400 Mbps, which is 50 MB/s.
Without knowing the specifications of the car, I guess that the "old external WD' performance is the limiting factor.
-
What to do if you got a warning message of * onlinegmz.com
as your phone is being hacked and you need to download a program to protect the data of the phone and photos to be hacked?
This occurs whenever you try to use safari (this is what happened to a friend)
< link published by host >
It's a scam.
Go to settings - Safari - clear the history and data from the Web site.
If that doesn't work, reset your device. This will not erase your data stored on the phone.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
To be on the safe side, you can restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
-
What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim?
If the iPhone is locked: only the provider it is locked, can unlock.
-
The satellite C855 - raised average temperature and fan speed
Hello!
I got this toshiba Satellite C855 since March this year. It is only recently that the CPU temperature and the speed of the fans have been worrying me.
When I'm not playing games or doing a livestream my CPU temp is about 35-40% with the regular 50% fanspeed or not on because she was cool.
When I play games however the fanspeed is up around 66 to 68% with the central unit was 55-60%
I was wondering if this is normal? or I have to clean it by taking it apart. If it's the second option then I'm worried because I don't want to damage anything inside. In addition, I'm not bad with the inner workings of a computer.
Any help or information would be greatly appreciated thanks.
In my opinion there is no reason to panic. T is the logic which is higher under stress, activity of the CPU and CPU produces more heat. Laptop needs to be cooled correctly, so the sensors that control the cooling fans sign up for increasing temperature and cooling fans run on higher speed.
There is no reason for cleaning. And one day if this must be done please don t do it alone. You are not allowed to do this.
-
Original title: computer not identified on the network
Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I know nothing on my network. What is - this and what that can do. ?
Implement the security of your network... How to do depends on details. If your network is at home on a wifi router, and then implement WPA2, which will prevent unauthorized as well as encryption of your data access. Follow these steps on the router itself (once again the details depend on your situation.)
While I'd love to implement WPA2, WPA2 will not accept my network and I am limited to WPA. My point is that if it is a wireless intrusion (we don't even know if it's wireless at this point), then the security settings on the router must first be discussed with the manufacturer ISP or router so that they are appropriate for devices and services and programs.
It could also be a USB transmitter attached to the computer. It might be the malicious program or a problem with the firewall or a real hack of the computer through the firewall or caused by malicious software (even if you use cables or wireless). It could be the entire network (but the number of computers which implies) or only this one computer. It could also be a system service using the network and not really another computer in itself (in office what he says and where - some may be difficult to recognize and interpreted as another computer). There are many possibilities. We do not know what the warning generation program or what he says. More information is needed. I would also like to work on it - and it can follow to her new home.
-
When to go to the Orange homepage and log in emails, get a white blank page.
Original title: my e-mail page is empty
When I go to the Orange homepage and sign in to my email, I get only a blank white page.
Hi AvzGaz,
1. what web browser do you use?
2. This only happens when you use emails Orange?
3. have you been able to connect to Orange before emails without any problem?
4. did you of recent changes to the system?
You can view the following support Orange link and check if it helps.
Webmail - I have problems signing in Webmail
If you are facing problems with the Orange mail, you could get in touch with Orange for additional assistance:
http://help.Orange.co.UK/orangeuk/support/personal/contacting_us?link=footer_contact_us
-
Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."
OS:-xp sp2
pen drive :-transcend
earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).
BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.
my folders have files .doc, some do' report.unfortunately not have a backup of these files.
target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN
In the location target properties are even 4 all records
Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls
What exactly is...
I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.
ESET that worms have been Win32/AutoRun.VB.UG.Worm.
now, I ve you gave details d, should know the problem I ve.i believe.help me
Thank you for your time, but I did nt get the solution everywhere so formatted, it
-
Original title: basic computer.
I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.
Hello
Go to the Dell website and download the drivers for your model computer.
http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS
Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.
See you soon.
Maybe you are looking for
-
Upgrade of RAM Equium A100-147
Hi, I have an Equium A100-147 with the standard of 1 GB of RAM (512 MB + 512 MB pc-4200) professional XP. I'd like to update, and I was wondering if it would be allowed to replace one of the 512 MB sticks with a single stick of 2 GB pc-5300. RAM woul
-
I have a dv7-3079wm that no longer starts. Leads to come but no disk activity. I suspect hard drive failure. I tried to run the hardware test program by pressing f2 after pressing on 'on '. No luck. Any ideas? Thank you Jack
-
Please point me to an article on adding several fields dynamically. I'm looking for the same feature in the Contact Manager for blackberry for adding email address multiple.
-
I try to eject my USB, but get an error:
The application 'ShellHWDetection' prevents this device to be stopped. Close the application and then try to stop the device again. Now what?
-
Salve a tutti,Kern una scheda audio Sound Blaster Z da some anno, ho smarrito scatola ed in essa it pure era (creed) the key by Magdalene casella degli multimediali musical...by riaverla sapreste tell come posso fare?Grazie