Phone not restart or update in recovery mode

Similar Questions

• El Capitan does not restart while updating

  El Capitan 10.11.3 trying to reboot the system to install 10.11.4. It closes all applications, there is only the trash and Finder icons in the Dock, but nothing happens.

  It is an opportunity to update to OS X without completely reinstalling the system? And why this is happening?

  Hi there bibimij,

  It seems that you install the 10.11.4 updated, but the computer does not restart on its own. There could be several reasons for something like that happening, but I'd first leave applications running when you run the update because there might be an application taking upward. If you are not sure whether or not you have closed them all, you can use Force Quit to quit any programs that may be running.

  Force a nearby application on your Mac.

  If this does not help, then I would then reset your PRAM:

  How to reset the NVRAM on your Mac.

  Test the issue once this has been reset. If she keeps going on although I would then start in safe mode so that some at the system level and hiding the kernel, as well as perform a disk check and repair if necessary.

  Try safe mode if your Mac does not end commissioning

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then exit the safe mode with a normal restart and test once more. Thank you for using communities of Apple Support.

• New SSDS do not mount on MBP 2012 Recovery Mode

  I replace the HD on a 2012 model 9.2 MBP with an OWC 6 G SSD. I ran a backup Time Machine on the HD 500 G original and then swapped the drive. I can't get the new SSD to appear in Recovery Mode to format it and install OS X I have tried with the original disc connected in an external box, even with the Time Machine backup drive and I tried with no externally attached at all. (Continued on the upgrade command instructions on the site of OWC http://eshop.macsales.com/articles/how-to-transfer-your-data-from-your-old-drive - to-a-new-reader) Then, I removed the SSD of MBP and attached to my Mac Mini in an external enclosure. It mounted fine and I was able to format. So I ruled out a faulty SSD. Then I restarted the MBP with original HD installed and the SSD connected via external enclosure. Run utility disc and formatted the SSD drive. Close all again and replace the SSD in the MBP. Started in Recovery Mode to install OS X and the drive does not appear.

  Currently of ideas. I rechecked all the components and all should be fully compatible.

  Ideas?

  -Scott

  Started in Recovery Mode to install OS X and the drive does not appear.

  You mean the restoration of the Internet (Command + Option + R)? Recovery mode is command + R, and since you do not have an operating system on your new SSD HD Recovery wouldn't be here.

• iPhone not recognized by iTunes in recovery mode

  Hello

  I have disabled my iPhone by entering the password wrong too many times.

  I do not have a reliable PC, so it makes things a little more difficult. The device is not (ask for the trusted PC) when it is connected normally but does not offer the option to restore the default values. She however does not recognize the device when it is in Recovery Mode.

  I checked my drivers, all the required software are installed, I use an original with port 2.0 usb cable (I also plugged my iPad who trusted the PC and checked another iPhone that is not disabled and both work)

  I followed apple for iPhone reset guide, but it does not go past the stage where iTunes should appear a window with the option to update or restore the device

  Someone at - he encountered this problem before? Any thoughts?

  I asked a friend who works in an Apple repair shop and he has not encountered this problem before.

  Thank you!

  Try DFU

  Connect your device to your computer with a USB cable.

  Turn off the device.

  Hold the Power button for 3 seconds.

  Hold the Home and Power buttons for 10 seconds.

  Release the Power button but keep holding the Home button.

  After that 15 seconds, you will be alerted by iTunes saying that it has detected a device in Recovery Mode.

  If this does not work, try the old way of doing the recovery mode

  Launch iTunes

  Connect the USB cable to the PC, but NOT on the iPhone

  Turn the iPhone off

  Hold the "home" button

  Connect the cable

  Keep now "home" button until you get the iTunes icon and the cable on the screen of the iPhone

  Restore as a new

  Hope that helps

• I can not fire first aid in Recovery Mode

  I upgraded to Sierra this afternoon. Because I'm disorder obsessive-compulsive, I ran first aid on Macintosh HD, despite the quite well running system. Said disk utility it found corruption, and should I run first aid in Recovery Mode. I restart, press command + R and go into Recovery Mode. I open disk utility, but I can't select "Macintosh HD" to perform first aid. It is grayed out.

  How can I select Macintosh HD in Recovery Mode to run first aid?

  When mode of recovery, that on the mac? (Apple menu, about this mac)

  have you tried r instead of command + R?

  You have a time machine backup drive? If so, can you boot option for that?

• I have a 4 s and just did the 9.2.1 update.  It has frozen and will not restart or update or restore.

  Any suggestions on how to get my phone to start?

  Have you solved your problem? If this is not the case, what you have tried?

  Have you tried to hold the two button at home and power buttons simultaneously until the apple logo appears. That my reset some of your settings but should force it to restart.

  I hope it works!

• Vista will not open windows Update in any mode

  I have a Windows Vista Home Basic system and I try to update.

  I can't open windows update control panel (or system properties) in normal mode. I tried a clean boot and boot safe mode and I still cannot open windows update.
  Control Panel opens in safe mode, but even from there, windows update still will not open. There is no error message when trying to open the updates.
  The task of the wuauserv service manager is running.
  "Updates" are available depending on the icon at the bottom right and it seems to download the updates. But I can't open it to install updates.
  I think that this system is not have service pack 2, but I can't without windows update.
  Can anyone help?
  Thank you

  Hello

  -What happens as you try to open windows updates?

  I suggest you to please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 2: Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope that helps!

• EMCC OUI(Win 2012) does not restart after updates.

  Hello

  I am trying to install the EMCC 12.1.0.4 on a virtual machine in Windows Server 2012 hosted on an ESXi server. Previously installed without getting updates completed without any problems. Because some features did not work properly, I decided to install once more and also get updates from Oracle. I followed the directions of advanced installation. The virtual machine has been reset to the stage before. So no installation is dirty.

  After getting updates and display the patches Oracle Setup calls a Windows saying that the installer will be restarted. But it's not. I waited and waited, but nothing happened.

  Newspapers shows the first steps after the restart and no other error. I tried several other approaches:

  1. download the updates from the server to install and use my credentials for Metalink

  2. use the option - ignoresysprereqs

  3 use the option - showProxy

  4. download updates on another server using the option - downloadUpdates as the copy on the server to win 2012.

  In all cases the same behavior:

  After you click OK in the windows message saying that will follow a restart of the installation, the installation program restarts, a command window is displayed for 1-2 seconds, then everything stops.

  I have everything running as administrator.

  See below the last lines of my log file of the inventory from the last test.

  INFO: 18.05.15 13:12:05 CENTRAL: already downloaded updates is selected.

  INFO: 18.05.15 13:12:05 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:05 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  INFO: 18.05.15 13:12:05 CENTRAL: all the fields are valid

  INFO: 18.05.15 13:12:05 CENTRAL: POPUP of WARNING: Das Installationsprogramm wird neu gestartet.

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug 14045804 YES

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug OPatch-1

  INFO: 18.05.15 13:12:17 CENTRAL: XML download location: null

  INFO: 18.05.15 13:12:17 CENTRAL: the file path is C:\Users\Administrator\defaultProperties.PROPERTIES

  INFO: 18.05.15 13:12:17 CENTRAL: Scratch Path = C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46 h

  INFO: 18.05.15 13:12:17 CENTRAL:-scratchPath

  INFO: 18.05.15 13:12:17 CENTRAL: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM

  INFO: 18.05.15 13:12:17 CENTRAL:-sourceLoc

  INFO: 18.05.15 13:12:17 CENTRAL: C:\temp\emcc_install\install\... /stage/Products.Xml

  INFO: 18.05.15 13:12:17 CENTRAL: sourceType.

  INFO: 18.05.15 13:12:17 CENTRAL: network

  INFO: 18.05.15 13:12:17 CENTRAL:-timestamp

  INFO: 18.05.15 13:12:17 CENTRAL: 2015-05-18_01-07-46 H

  INFO: 18.05.15 13:12:17 CENTRAL:-ignoresysprereqs

  INFO: 18.05.15 13:12:17 CENTRAL: RESTART command: line cmd /c C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/install\setup rscratchPath - C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM - rtimestamp 2015-05-18_01-07-46 h - rstartupLoc c:\temp\emcc_install\install-redemarrer - ouifromLocation C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\products.xml - ouiResponseFile C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\Response\oracle.swd.Complete.rsp - ignoresysprereqs - paramFile C:\Users\ADMINI~1\AppData\Local\Temp\2\ OraInstall2015-05-18_-07/01/46 PM/temp.ini - jreLoc C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\jdk/jre - J - Doracle.installer.extjre = false

  Test auto-updates to date: using paramFile: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\temp.ini

  Check the swap space: must be greater than 150 MB.   Real 5625 MB passed

  Monitor: must be configured to display at least 256 colors.    4294967296 real past

  The command line to decompress:

  C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1\install\unzip - qqqo... \stage\Components\oracle. SWD.oui\12.1.0.1.0\1\DataFiles/"*.jar" d "C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM" INFO: 18.05.15 13:12:22 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:22 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  So, if someone met sam ahint problem would be appreciated.

  Best regards

  Cantemir

  Hello

  a realization to the description in my question:

  The list of patches to install was the following:

  Patch 19337487 for the Service of management of Oracle for 12G

  Patch 19003055 for the Service of management of Oracle for 12G

  Patch 19519190 for the Service of management of Oracle for 12G

  BASIC 20392036 ENTERPRISE platform MANAGER - SGD 12.1.0.4.3 PSU (GENERIC)(System Patch)

  Updated 14045804 YES

  And I was able to capture the contents of the command window that appears for 1-3 seconds prior to YES.

  Are more errors saying:

  ...

  error: cannot remove the old c:\Users\Admini~1\AppData\Local\Temp\2\OraInstall2015-05-18_02_04_18PM\oui\jlib\xml.jar

  ...

  YES updates patch would probably come in conflict with the running configuration.

  In any case have not yet no solution.

  Cantemir

• Windows restarts after updates while runing mode full screen

  Dear,

  I have a problem with the windows updates.
  Whenever windows installs a new update, if I'm running a full-screen application or a full-screen application, restart windows all of a sudden without giving me any notice.
  So by doing something, I find its closure and windows stops.

  I need to stop this, without stopping the automatic updates.
  What should I do?

  http://support.Microsoft.com/kb/555375>

  He helps those answering questions if you provide more information. More information you provide, will helpsomeone to provide you with a relevant solution.

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3143960-A237-4D32-B763-5d096479be9e>

• Cannot update CC - bar moves to 100% then does not restart and update is not complete

  When I first open CC, I get this - already looking for a little buggy. I hit 'install now '...

  

  The progress bar makes 100% then all the window disappears and the icon is no longer in my toolbar at the top of the finder. However, the CC icon IS always in the dock at the bottom... but (unfortunately) when I double-click on it, I get this:

  

  I tried to uninstall CC with the uninstaller app, but I get this:

  

  Help!

  On a MacBook Pro, El Capitan 10.11.6 running.

  Thank you!

  I saw just a question I had in June of this year - it was EXACTLY the same. I went through all the recommended steps and eventually had to contact support and after a remote session of 30 minutes, the problem has been resolved. Frustrating that I am going through it again three months later.

• iPhone stuck in recovery mode 5 c

  Hi all

  I'm not native English and my grammar isn't the best, so if you do not understand something I posted, just ask and I try to be more specific.

  I have the problem that my iPhone 5 c is stuck in recovery mode and I have so far failed.

  The problem started with iOS 9.3.3. In the aftermath of the update my iPhone crashed with the screen flickering and restarted every 1-2 minutes. Then I installed the iPhone as a new iPhone and it was good for a few days and then it happened.

  Then comes the 9.3.4 iOS update. The update worked for a day and then all of a sudden my iPhone has not found any connection to my mobile operator. WLAN and bluetooth still worked.

  Then I tried to restore my iPhone again. First of all everything went well and the update was successful, but the same day, the flicker of the screen and restarts every 1-2 minutes came back.

  I once again tried to restore my iPhone, but this time it did not work. First of all, I got error 9 several times.

  These days I get only error 4013 and I can't get the iPhone out of recovery mode. When I try to launch it to the of in the mode of recovery and all the ways to get out of her failed.

  When I try to retrieve it with iTunes, it extracted the software, then the iPhone restarts until I see the apple logo and the "busy" - circle appears. Then the whole screen fades away in the dark, as if he would run out of power, but leaves immediately in recovery mode where I see the iTunes logo and the cable with plug.

  Here's what I did:

  -Hold the home button and the Start button / stop in any combination: he restarts, but returned in recovery mode and error 4013 in iTunes.

  -Via another USB port: same result, error 4013 in iTunes.

  -Tried it on another computer (Win 10) with fresh install iTunes. Here, I got error 21 once and 4013 the second try.

  -check the URL in the file host

  -J' tried all methods, I found on the internet and in youtube videos in this community.

  I bought the iPhone end of 2013, that is guaranteed is not in effect. Ever, the iPhone fell down or has been damaged in any way. And it is not jailbroken.

  So I have a few questions:

  1. is this a software problem or it could also be a hardware problem?

  2. do I can install iOS 10, it will overwrite the current state and install it?

  3. If it is a problem that is caused by a defective software update, apple will repair for free? Or will contact free support in this case?

  4. someone an idea that a repair is going to cost me?

  Hello

  Make sure that you have followed all the steps related to error code 4013 and code error 21, notably by ensuring that you are using a real lightning Apple USB cable (or the equivalent of third-party certified IFM):

  • If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
  • Get help with iOS update or restore errors - Apple Support

  And also that you follow the correct process:

  • If you see the connection to the screen of iTunes on your iPhone, iPad or iPod touch - Apple Support

  If the problem persists then, I suggest you contact Apple technical support or make a Genius Bar reservation for assistance, including to have checked whether iPhone recommended by Apple:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Restore iPhone 3gs Recovery mode 1015 failed

  I have an iPhone 3G, bought when it was marketed in Australia. It was sold as unlocked network, I discovered a year or later when he suffered an iOS update, means that it was jailbroken. With the network lock in place and the prospect of my partner do not have a functional phone the next day, the jailbreak process again to operate the back on the network. The process was a success, and the phone has been kept out iOS updates more by fear to make the phone unusable again.

  But software eventually became too large for the phone and he entered retirement.

  Now we must once again, but for someone else and the architecture of phone iOS them would be nice, and they haven't needed to edge cutting.

  According to the riches of the internet, the phone can be restored from the recovery mode, which is the State I found it trying to get it back in service, plugging it into iTunes and by performing a restore. The restore process fails however.

  Occur in the following steps, as listed on iTunes.

  Restore iPhone software: iTunes progress bar ends. iPhone progress bar, about 1/3

  Check the iPhone software: iTunes progress bar ends. iPhone progress bar, about 3/5

  Restore iPhone Firmware: iTunes progress bar ends. iPhone progress bar, about 2/3

  Check iPhone Firmware: error 1015. iPhone goes back to recovery mode.

  I suspect that he has problems with the restoration of the firmware.

  So are the relevant issues;

  1. the iPhone 3 G can be recovered in a usable state?

  2. even if it is recovered, the locking system can be removed?

  Error 1015 is a result of jailbreaking the device in the past. If the connection in recovery mode and install the firmware do not work, the jailbreak done the phone useless, sorry.

  Error: 1015. You can also see the message "the requested resource is not found."

  These errors may appear if one of the situations below are fulfilled:

  • Your version of iTunes is obsolete. Download the latest version of iTunes, and then try to update or restore again.
  • Your device has a beta version of the iOS.
  • You try to install an older version of iOS (decommissioning).
  • Your device includes unauthorized changes in iOS, also known as "jailbreaking."

  Use the recovery mode to restore your device to the latest version of iOS.

  copied from help with iOS update and restore errors - Apple Support

  Only the provider that the phone had been locked can unlock the device, if it is an option, not the carrier has offered to unlocking the device back at the time of the 3G.

  iPhone: about unlocking

• Stuck in recovery mode

  I restored my iPhone 5, went to recovery mode, as soon as iTunes started progress, it showed the error 9.

  Now my iPhone is stuck in Recovery Mode. Even after I have iTunes eject or remove using 2 buttons, when I restart, it automatically appear Recovery Mode.

  Help please..!

  Hello

  Turn off the iphone

  Connect the USB to your PC wire

  Do not let go press & hold button power on iphone

  Connect to the iphone power button pressed

  Until the PC sees iphone and then wait for the restoration.

  You may need to do a few times before it works.

  See you soon

  Brian

• Update iPhone6 in recovery mode

  My phone is stuck on the Apple logo loop after not updating my phone for some time. I followed all the instructions to update my phone via iTunes recovery mode. Downloading the update last night after a few minutes, but I was still trying to download the update. When he did I put the iPhone in iTunes and started the process of updating. Everything works fine until the loading on the screen of the iPhone bar is almost full, and then it stops, logs off of iTunes and restart again. Ive tried to repeat the process four times now. There is no error message. Is it possible to correct this problem or another solution that does not lose everything on the phone?

  Try:

  Put your device in DFU Mode

  Follow these steps to put your device in recovery mode iOS. If your iOS device is already in recovery mode, you can proceed immediately to step 6. 1. disconnect the USB cable from the iPhone, iPad or iPod touch, but leave the other end of the cable connected to the USB port of your computer. 2. turn the power off: press and hold the sleep/wake button for a few seconds button until the Red slider appears, then drag the slider. Wait until the device turns off. * If you can not turn off the device using the slider, press and hold Buttons sleep/wake and Home at the same time. When the device turns off, release the sleep/wake button and the home. 3. While pressing and holding the Home button, reconnect the USB cable on the device. The device must light up. Note: If you see the battery charge warning,. leave the unit in charge for at least ten minutes to make sure that the battery has some charge and then start again at step 2. 4. continue holding the Home button until you see the "Connect to iTunes" screen When this screen appears, you can release the home button: 5. If necessary, open iTunes. You should see the following alert of "recovery mode": 6. use iTunes to restore the device.

  If you do not see the "Connect to iTunes" screen, repeat these steps. If you see the "Connect to iTunes" screen, but the device does not appear in iTunes, see this article and its related links.

  Note: When you use recovery mode, you can only restore the device. All content on the device user is deleted, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!