Photos has some black and some thumbnails "whites."

Similar Questions

• Always the color in the photos after the black and white conversion

  Hello

  I have a very strange problem. After the conversion to black and white photos in Lightroom (no matter if I chose B & W in the basic menu, set the saturation to 0, the HSL value 0 saturation sliders or choose a B & W preset) my photos have still a few colors in them. Before and after have exported them.

  The pictures are taken in RAW with a 550 d or a RX100. Same results for all. I use Lightroom 4.3.

  I searched a lot on google and also here in the forum and have not found anything.

  Any ideas?

  Kind regards

  Julian

  

  If you have Lr and PS side by side they appear identical. If they are not something certainly will not, and I agree with ssprengel that it's most likely a monitor profile bad that one of them is choking on.

  If you don't calibrate and profile the monitor yourself (what is the right way to do it), the safest bet is always to use sRGB (or if you have a wide range of monitor the Adobe RGB, but you do not have). > This thread contains a description of how you do it.

  ---

  Some information:

  Monitor profiles contain two parts. One, quite simply, white fixed point, correct the response curve and remove color casts. It is loaded into the video card (or the screen itself) and affects all across the system. This is the part of the calibration.

  The second part is the profile itself, which is more complex. It is, in short, a complete description of the features of monitor in three-dimensional space color. Among other things, it defines exactly the position of the three primaries. It takes the calibration in the image, so in other words it is a description of the screen in its calibrated State. But only color management applications to read the monitor profile and debug to display accordingly. Other applications just ignore it and send the numbers directly through.

  This second part, the profile itself, is what often causes problems because many profiles are not properly written. Manufacturers of monitor (and portable) are known for this. You would think if he succeeds, but it's not fair.

  To compound things, these bad profiles are often pushed through Windows Update, so that people don't even know they are being installed.

• Color photos are considered black and white only

  So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

  So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

  =============================================
  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why my photos go to black and white?

  Hello

  When I drag a color photo of the trash to the work plan, it appears in black and white. That do I do pour settle this?

  Thank you!

  LG

  ligian2505 wrote:

  Hello

  When I drag a color photo of the trash to the work plan, it appears in black and white. That do I do pour settle this?

  Thank you!

  LG

  It depends on the color of the imported photo mode. You picture of the ICU menu the can always > Mode and select "RGB color."

• Why the photos appear in black and white when I drag the Photoshop?

  Whenever I drag a photo in Photoshop I don't get colors, they appear only in black and white

  Is the file that you drag to the value Image > Mode > grayscale?

  If so, the change in RGB color.

• Toshiba 20AF45 has a black and white photo

  Hello I have a Toshiba 20af45 TV which does not show the color image. I have a 3 color av cord and color 5.

  I tried to see if I can change it in the settings menu, but there is no AV input button The menu under colorstream only allows me to change DVD to digital television. I have a cable box as well attached to the television.

  Any help will be appreciated.

  

  Yellow video connector is plugged into the right place on your TV? I think you should link it on the left side.

  Check the photo, I am sending you.

• Vista starts and has a black screen with a white pointer, what should I do?

  I have a toshiba satellite laptop computer with vista.  It seems to boot into an operating system, but I don't see a white mouse with a completely black screen pointer.  Is it a problem of theme, and in this case how to fix?

  Hello

  Try following the methods provided below and see if it helps:

  Method 1:

  Try logging in safe mode and check if you are facing the similar question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to boot into safe mode, you can try a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows
  http://support.Microsoft.com/kb/929135

   

  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.

  Method 2:

  I would say that you want to run System Restore in windows recovery mode and check if it helps. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:

  I suggest to update the graphics drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, try to restart the computer by pressing F8 and in the advanced startup options, select Enable VGA Mode and check.

  Disconnect external devices and check

  Hope this helps,

• OfficeJet Pro 8500 has more: impression of 8500 has only black and yellow

  Pretty simple problem.  The cyan and magenta colors do not print.  The cartridges are all fairly new, PLR and lines of supply to the printhead not are not tangled, etc..   I wonder if I need to replace the print head.  The machine is almost 4 years old.

  Thank you

  TP

  Hello @thomasapayne,

  I understand that when you are printing on your HP Officejet Pro 8500 has more e-All-in-One Printer Color Cyan and Magenta will not print. I would like to help you today with this problem of print quality. Thanks for the troubleshooting steps that you received before reaching out for support, including. Currently, there are a few quality printing additional troubleshooting steps that can be done to resolve this Cyan and Magenta print quality problem. However, if these measures fail to solve this problem of quality then a replacement Cyan and Magenta Printhead will likely be needed. That being said, can I please have you follow the steps below.

  To begin troubleshooting can I please have you click here. Once the support document opens, please follow the steps under four Solution. This includes step 1, step 3, step 4 and step 5 under four Solution. You may need to run the three print head cleans to unclog the printhead system. Attention do not exceed three clean because the ink is used during the process of cleaning print head. After troubleshooting is completed, please print another diagnostic quality report in order to confirm if the quality issue has been resolved.

  If the problem persists, a replacement Magenta and Cyan Printhead would be necessary.

  The print head should be is original printhead Cyan and Magenta HP 940. The part number is C4901A.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• EOS Rebel T3 Led display has two lines black and white grainy to and controls are frozen help

  When the unit is powered on any of the controls development works and the LED screen has only black and white grainy lines above. Tried to remove the battery to restart made no difference. If you have an idea of what happens to your help would be appreciated a lot.

  Did you drop or wet?  Call the Canon Service.

  BTW, the battery must be removed to reset the camera like this for a week or two.

• Adding color to black and white or sepia photos effects

  Just got this program and have watched the tutorial. I can't understand how to add color to a black and white photo. I have a photo I want black and white but just the flowers in my daughters hair for color. How can I do this?

  I would appreciate help, that we paid more money that we wanted for this program and this was one of the main things that I wanted to be able to do.

  Thank you!

  If you have PSE9 and a color photo to start; Then, you can use a layer mask.

• Lightroom black and white to color

  When I download my pictures from my camera to lightroom 2.2 it takes pictures that I shot in black and white and converts them into color t-anyone knows if there is a setting or a way to avoid this?

  Hi Andrew

  I'm assuming that you are shooting in RAW. If you take photos in JPG format, you will get the black and white photos. The reason why you see a black and white in reading on the camera must be because the camera shows a preview in black and white.

  Fortunately for you, RAW capture red, green and blue and combines them into a picture, your photo. If the RAW converter in lightroom necessarily combines the components, which makes a color image.

  It's a good thing. RAW images capture as much as possible, if you have a lot of information and details for a shot as possible.

  Black and white conversion in lightroom allows you to play with colours by photos. If she has imported black and white you would have lost so much information.

  What if you came home for a shoot and directed a shot could have been great in color, or you rushed to film a sunset forgetting that the setting was on black and white...

  To make the lightroom import photos in black and white, you will have to do a develop preset.

  more simple way, forgive me if I'm teaching to suck you eggs.

  1. open lightroom

  2 goto development

  3. click on shades of gray in base salary

  4. right click on the thumbnail on the bottom which is now black and white go gold the PRESETs on the left of the screen by opening the Panel if ifs not here and click on the +.

  5. enter a name of the preset - import IE black and white

  6. Select Auto Grayscale Mix

  7. click on create

  1 preselection made

  To import

  1. click on library

  2. click on file and import - from the disk, the system...

  3. Select the files you want to import as a black and white, check them while they are selected

  go to the development parameters

  has chosen the basic settings and

  According to the information to apply develop settings and select from the drop-down list select import in black and white

  and then import it.

  The pictures you have selected then will be black and white.

  It will work - you may need to remember which photos were black and white as thumbnails in the import dialoge may not be black and white.

  I'm not black and white I want to play with the color that I made in black and white.

  Mode shooting black and white means that you can NEVER have a color version of the photo, so you may lose is a beautiful photo of your bet.

  As you use Lightroom, you're messing around with the images, so shoot color, and then click Grayscale and play them with the mixture of shades of gray, you'll have a lot more fun.

  But who is mentioned above process will bring your black and white photos.

  Hope that helps you

  (I still shoot color and convert every time - even if jpeg)

  Hamish

  www.hamishniven.co.za

• Profile of Photoshop Black and white for printing

  I'm a black and white photographer, this issue is so important for me to solve. I've been looking online and I still have to find the answer, so I hope someone can help.

  I need to know how to set up the profiles of black and white in Photoshop for printing. The printer I have is a canon Pixma Pro 9000 mark II

  I need real black and white. Thanks in advance for any help or suggestion. If you need me to provide more information let me know.

  I often print black & white work on an Epson, using advanced black & white in the print driver.

  A quick Internet search found that there is something similar for Canon - Canon: PIXMA Manual: Guide to Digital Photo printing: printing black and white

  I print files scanned in grayscale and have the profile to grayscale in PS 2.2 Gamma value.

  If you print digital photos, they will be RGB, but which will probably make no difference. But you have to read the documentation for the Canon if it will be. IOW - if the image must be in grayscale or RGB levels.

  Something very important when printing as this is to set the printer to manage colors (not PS) in the dialog box print of PS.

• Black and white to color

  Hello world

  I am new to the catalyst and bumped into my first problem. I want to make a website and began to create it in illustrator and open in the catalyst.

  I have several items and objects on the website who need to change color. For example a photo that is black and white must change its original colors when the mouse on the element.

  I want to make this black and white transition of color on the photos, the vectorgraphics and texts. Especially the pictures are a problem.

  Please help me! I need it for my final exams...

  thnx

  I forgot to mention that you need to add 'On Roll Out' Interaction as well for the custom component.

• My taskbar and sidebar turned white.

  My taskbar has been black and my sidebar was clear that now they are both white. It is not happened to one of the other users on the computer. How to get back to normal?

  Hi nanny Tara

  Thanks for posting on Microsoft Answers.

  Please, try the following to resolve the problem.

  Right-click on an empty space on your desktop
  Click Customize
  Click Windows color and appearance
  Click Open classic Windows properties
  Windows Aero color scheme

  Please let us know if it helped to solve the problem - thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.