photos not held since the upgrade to elcappitan

Similar Questions

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• 3D photo restores do not properly since the upgrade

  I developed an application in labview 2012 and have recently updated until 2014.

  Since this upgrade, I have a problem with my 3d image rendered incorrectly.

  I am attaching the images as it is difficult to describe the problem. There should be 4 of robot arm placed on the corners of a gray box that is placed slightly above the ground. The image with the removed soil that shows the best, but it is obviously incorrect. Remove objects and textures can give better results in some respects, but the question is always present whenever I changed something.

  It seems that parts of models are not rendered or sections are not rendered in the correct order, but I'm not aware of all the properties change this.

  I tried to change the clip plain but documentation is very limited and I doubt that's the problem anyway as the middle of the image which is incorrect, the floor and the ends of the robots never seem to cut.

  I am running Labview Robotics 2014 and using the Robotics Toolbox to generate arms on Windows 7 64 bit with nvidea GeForce GTX 760 graphics card.

  Any help is appreciated.

  Thank you

  Nick

  I experienced similar problems with the rendering window. I feel quite informal and subjective, it is that the render window is something that NEITHER is not updated with the latest improvements in graphics cards, and having developers use real 3D image controls instead.

  I experimentally tested the 3D picture control and I can't see any advantage of the render window of performance compared to the 3D so image my, yet unofficial, impression is that image 3D controls are hardware accelerated now but it is not clearly stated in the documentation for LabVIEW.

  You can put a window on a façade of VI 3D and select in the context menu 'Fit control component' and create a window similar to the rendering window. It requires a little more programming, but you get a lot more flexibility for your application.

  If you are interested, join the Group Vision 3D!

• 8600: scan Premium OfficeJet Pro 8600 does not work since the upgrade of Mac to 10.10.1 (Yosemite)

  Since the update of my MacBook Pro in Yosemite, I can't function of the computer analysis to work. I downloaded again the softwear & reinstalled; reset the printer, repaired disk permissions, etc. nothing works. I also note that the HP Utility icon no longer appears.  Print and copy work very well. Any suggestions?

  I tried everything above. When I add the printer driver printer HP (instead of AirPrint) does not show as an option (even if I can find it in my downloads folder). Option is the HP DeskJet that comes with a warning that it cannot be the right driver. Also downloaded what seems to be the right driver on the HP site. He also appeared in my downloads folder. HP utility always not available.

• Hearing 5.5 does not work since the upgrade to Windows 10?

  Hearing of the charges u, and I need to work with the files load in the software too. But nothing else happens. It won't play, won't record, regardless of whether the file is passed to in the menu, a sequence of keys, or a button on the screen. I have re-installed the software: no change. I have uninstalled and reinstalled again: nothing.

  Help, please?

  Elegantly yours.

  Tom Fitzmorris

  [(informations personnelles par Email signatures et deles de renseignements personnels)-mod]

  I heard about 5.5 on Windows 10.

  The first thing I would check is that Windows and hearing are "accepting" on the audio interface (and pilots) to use and also things like rates and few sample depth.  We had a poster with CS6 yesterday who had a similar problem and going through and manually configure the interface card / audio itself sorted.  The upgrade to win 10 to reset everything, probably for video playback, at the expense of the audio recording.

  Your do not mention that you use as a sound card, so I can't be precise in what to do, but the first thing I would do is go to Windows Audio Control Panel and make sure that any sound card that you want to use is visible and selected by default for the recording and playback...  While in the audio control, also access advanced settings (recording and playback and make sure that the depth of rate and little run the settings you want.)

  If you have a card with its own software external sound, go there and set it up to match Windows.

  Finally, go to Edit/Preferences/Audio Hardware and make sure that the right device is set for recording and playback on the drop down menus.  Also, make sure that the "device class" is set to the right kind of driver for the audio interface you.  This will probably be Ms for an integrated sound card or to an external ASIO - but you'll have to work it yourself.  Apply all these changes, so I hope that things work out.

  If this is not the case, let us know the details of your system and the audio interface and maybe we can come up with other ideas.

• Info-bubble/metatext when I go is not displayed since the upgrade to 22

  Since v22.0 UPDATE when I hover over icons on my page in the history of purchase on ebay it not lonely appears with information such as "Paid" a similar report last year, I suspect it's because I'm using the Google toolbar.
  Any chance of a solution please?

  NB. Yes, Google Toolbar is discouraged because it is not supported, must be hacked to work and I have to use the Compatibility Checker (disabler) but I have to use the Google toolbar. I and a number of other people use Google toolbar to share bookmarks widely on many machines, and none of the proposed alternatives offer what it takes in the bookmarks and other w features using a unique toolbar!
  If a solution does not appear, soon we will have to go back to 21 of FireFox. or switch to Chrome.

  I installed the add-on "URL Tooltip" and my stationary links are back. Thank you very much.

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck

• Web Cam not recognized since the upgrade to Windows 7

  I've recently updated my Toshiba Satellite Windows Vista to Windows 7. Skype now does not recognize my web cam. How can I fix it?

  By getting the win7 drivers and Tosh photo app supports, specific to your model, they provide win7 drivers, if it's not vista drivers usually work

• Trackpad and left and rick click on the button does not work since the upgrade to windows8

  I have a Sony Vaio VGN-FW21Z and I have upgraded from windows 7 to windows 8, the laptop works beautifully, but I'm forced to use a usb mouse as my pad and click left and right click doesn't work and I tried to install all the drivers several times to fix this problem and nothing's done, can someone please shed some light on this issue please.

  Hi Maiku,

  Windows 8 drivers are not available for your model. Check out the following link.
  Support for VGN-FW21Z http://www.sony.co.uk/support/en/product/VGN-FW21Z/updates

  As it is has no drivers for Windows 8 operating system, I suggest you to uninstall the current drivers for touchpad and install in compatibility mode.

  
  Refer to this link: make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  If the problem persists, you can contact Sony support by using the community available in the link above.

  I hope this helps.

• vifptarget: command not found since the upgrade

  I upgraded my camera vma 5.1.0.0 Build build 782391 to 5.1.0.1 1062361 this morning and now when I try to issue the vifptarget command to specify one of the guests in my list as target I get

  -bash: vifptarget: command not found

  I can see the man page for the command and I noticed that it in/opt/vmware/vma/bin/as well as vifp that works to add or remove hosts.

  I tried a logout or restart the device, but that did not help. I tried to add location of the command on my way and that only errors generated.

  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.
  in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10
  Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.
  BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.
  . / vifptarget: line 185: back: can only 'back' of a function or an original script

  Someone knows what's the problem with him?

  Thank you

  You can try:

  1. from the vMA console, open the /etc/bash.bashrc file in the vi editor.

  2. Add the following lines at the end of /etc/bash.bashrc

  alias vifptarget = ' source/opt/vmware/vma/bin/vifptarget '.

  source/opt/vmware/vma/bin/completion_vifp

  source/opt/vmware/vma/bin/completion_vifptarget

  source/opt/vmware/vma/bin/completion_vifs

  export LD_LIBRARY_PATH = ${LD_LIBRARY_PATH: + $LD_LIBRARY_PATH :} / opt/vmware/vma/lib64: / opt/vmware/vma/lib}

  3. run:

  /etc/bash.bashrc source

• Calendar not synchronized since the upgrade to El Capitan

  Hi all

  I have problems with syncing my calendar with my iCloud because I upgraded my Mac OS to El Capitan. I tried to uncheck the calendar in iCloud and wait a while before reconnect you. Restart my iMac. Disconnect from my iMac and insert it again.

  Help, please!

  Kind regards

  Rodney

  Read these articles from Apple Knowledge Base

  Calendar: Sync calendars between devices

  My sync schedule

• The link "e-mail" on the file Menu does not work since the upgrade to FF 16.0.1. I use Gmail as my email address. All solutions?

  Given that the "send link" option is now gone, what should I do to make this other method work?

  Is selected as the Gmail email client: Tools > Options > Applications

  You can watch the prefs Network.protocol - handler.external.mailto topic: config page.
  
  If Network.protocol - handler.external.mailto prefs are user defined (in bold) and then right click and reset them by default.

  • http://KB.mozillazine.org/about:config

• Why my tab on the keyboard key does not work since the upgrade to 16.0 FF?

  Noticed this trying to get around on your website, GMail etc so that I can move from one field to (example: in the field in Gmail, hit the tab key on the keyboard to move to the field of the object).
  Inadmissible tab button.
  Safari and Chrome have this ability. Obviously something has occurred that I updated today to 16.0 and yet I was indeed in the 15.x.

  This key is important for speed for a daily work. Please tell us how can I re - activate its features.

  Thank you.

  COR - el,

  Just updated tonight at 16.0.1 and voila, the problem has been resolved without being too technical.

  Wanted to thank you for your help.

• Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  See the documentation for more information. Photoshop Elements and bridge use the same Photo Downloader: organizing elements does not recognize some devices | Mac OS 10.11.x

• Since the upgrade to free 29 arrows of browsing some sites do not work. Is there a solution by chance?

  Since the upgrade to free 29 arrows of browsing some sites do not work. Is there a solution by chance?
  I think this story says it all. The most problematic sites are mainly news sites
  http://Compaq-desktop.AOL.com/#
  It has 1-40 or 45 new photos which can be browsed through by clicking on the arrows. Before the update without problem.

  Problem solved, if only temporarily.
  It's as simple as switching to the ad-blocker for the site only.