Web Cam not recognized since the upgrade to Windows 7

Similar Questions

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck

• Hearing 5.5 does not work since the upgrade to Windows 10?

  Hearing of the charges u, and I need to work with the files load in the software too. But nothing else happens. It won't play, won't record, regardless of whether the file is passed to in the menu, a sequence of keys, or a button on the screen. I have re-installed the software: no change. I have uninstalled and reinstalled again: nothing.

  Help, please?

  Elegantly yours.

  Tom Fitzmorris

  [(informations personnelles par Email signatures et deles de renseignements personnels)-mod]

  I heard about 5.5 on Windows 10.

  The first thing I would check is that Windows and hearing are "accepting" on the audio interface (and pilots) to use and also things like rates and few sample depth.  We had a poster with CS6 yesterday who had a similar problem and going through and manually configure the interface card / audio itself sorted.  The upgrade to win 10 to reset everything, probably for video playback, at the expense of the audio recording.

  Your do not mention that you use as a sound card, so I can't be precise in what to do, but the first thing I would do is go to Windows Audio Control Panel and make sure that any sound card that you want to use is visible and selected by default for the recording and playback...  While in the audio control, also access advanced settings (recording and playback and make sure that the depth of rate and little run the settings you want.)

  If you have a card with its own software external sound, go there and set it up to match Windows.

  Finally, go to Edit/Preferences/Audio Hardware and make sure that the right device is set for recording and playback on the drop down menus.  Also, make sure that the "device class" is set to the right kind of driver for the audio interface you.  This will probably be Ms for an integrated sound card or to an external ASIO - but you'll have to work it yourself.  Apply all these changes, so I hope that things work out.

  If this is not the case, let us know the details of your system and the audio interface and maybe we can come up with other ideas.

• Since the upgrade to windows 8.1 my webcam/camera screen is empty

  Since the upgrade to windows 8.1 my webcam/camera screen is empty. The light on the cover but no picture. Help...

  Did you open her camer app which is part of Windows 8.1?  Have you installed the driver for the webcam?

  Windows 8.1 Webcam help

  http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ

  It would help if you identified your laptop with its full product name or product number.

  1. the full name of the model. or product number. the laptop - see web document this HP if you do not know how to locate the product number or model number.

  2. the full version and the name of the operating system you use (IE Windows 7 64-bit).

  3 see. you an error message or code blink?

  5 post the processor and chipset installed if you know

  4. is your laptop still under warranty?  Check the status of your warranty here.

• Since the upgrade to windows 7, my DVD players 8 do not work. They do not recognize cd / dvd.

  Since the upgrade to Windows 8, my two DVD players do not run. They don't recognize CD / DVD. When I try to force the browser to search for, it keeps open the DVD player but can't find not all discs. All solutions?

  Hello

  Try to install the latest driver of gear from here... Version 4.020.5

  http://www.GearSoftware.com/support/drivers.php

• Could not open the games in the emails of AARP since the upgrade to Windows 8

  I used to be able to open the games of my emails of AARP, but since the upgrade to Windows 8, I can't it is no longer.  I get a message "this page cannot be displayed".  When I click on "Fix connection problem", it tells me that there is no connection problem.  I plugged directly on the website of AARP and still failed to open the games on my computer.  What is Windows 8 to prevent me from opening of the games and how we can solve this problem?

  This message means that the site is having a problem.  There is nothing you can do on your end to fix it, and it is not a problem with Windows 8.

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• Since the upgrade to Windows 8, my graphics card will not work. When will the upgrade come?

  I upgraded my VAIO (VPCZ2190X) to Windows 8. I lost the HDMI connection and a few opportunities for expansion pad mouse because of the graphics card with drivers not appropriate. Anyone know how to get these drivers?

  I have the same problem - no HDMI on the output adapter since the upgrade to Windows 8. Sony upgrade information said that we had to restart when the connection to the docking station after the upgrade, but he indicated that it would cooperate.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• OfficeJet HO 5742: I have HP Officejet 5742 and since the upgrade to Windows 10 I can't scan.

  Since the upgrade to Windows 10 I can't scan. The printer indicates this computer not connected, but I can always copy and print.

  Thank you rb011. I used the print and scan doctor and he pointed me in the right direction. The solution is to uninstall the printer and reinstall the drivers updated from the HP website. Everything is ok now. Thanks again.

• PAVILION SLEEKBOOK 15: since the upgrade to windows 10 PROBLEMS

  MODEL PAVILION 15 - b149ca

  Since the upgrade to windows 10, the touch screen is not accurate. HDMI will not work and is missing the driver, my charging does'nt of battery itself and was going well a week ago.  Also the light for does'nt mute his work more.  I noticed that he stops himself from time to time... someone can help me!

  Hello mf Qwerty... I can tell you how to get your computer fixed. .contact microsoft which were very good and I am now back to win 8.1 and still have old programs, music, and photos.

  I was impressed by their useful service?... Go to their help page.  ... www.microsoftsupport/Help... could be the address.

• Pavilion dv6700 entertainment: loss of sound on pavilion dv6700 since the upgrade to Windows 10

  Since the upgrade to windows 10 I lost my audio... can not play MP3 music and the system sounds don't work... wanted for driver sound card and found three recommended... each of them has reported a hardware not found... decided to reinstall the driver of sound card on my install of windows 7, as luckily I backed up all my drivers before moving on to OS10... even if it is installed, still no sound... removed devices and drivers and let the laptop reinstall after rebooting... do not know what else to try... do not believe that there is a sound muting function key that I do not know... Thank you

  UPDATE...
  just try the idea of setting frequency to 16-bit 9600, but I got no sound error box [...], then is alle went settings improvements where she has low etc etc settings has been disabled so it allowed without choosing any of... then I went back and changed the default frequency which is 24 bit 19200... then told me not supported by this device but then miraculously it worked... have now all music sound restored windows all... don't know if still have windows 7 driver... it is MS 2008... really afraid to update the driver because it is all now work... don't know how I fixed it but, was it a particular action? or a combination...? Maybe this might help others...

• Pe11 complains about the inconsistent display HD 3000 driver since the upgrade to Windows 10

  Hello

  I am running PE11 on a laptop Dell Inspiron N5110 with integrated graphic HD3000 and Nvidia GT525M graphics card. Pe11 is configured to use the integrated graphics (it doesn't seem to work at all with the GT525M).

  Pe11 run fine under Windows 7, but since the upgrade to Windows 10 I get this message when I start PE11:

  

  I can not find BadDrivers.txt anywhere on my system (despite the display of hidden files).  So, how can I resolve this you problem?

  Best regards

  David

  Where did you get the BadDriver.txt file?

  You will certainly find it in the C/ProgramData/Adobe/Premiere elements/11.0

  But make sure that you first install the latest Intel Graphics Driver of

  Download graphic drivers Intel® Windows® 10 [15.40] [4th Gen]

• Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Hi Dan,.

  Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

  Also, what exact version of Photoshop and Lightroom are you using?

  Search for graphics card drivers update as well.

  Kind regards

  Assani