Photoshop CS3 fails to load into the old user profile.

Similar Questions

• I can't access the old user profiles in Win 7 64 don't bits than current ones?

  I had problems with my hard drive and did an emergency backup. When everything was fixed, I had to create a new user account. I can see the old user profiles if I go into my computer and I can share it with my current user profile. However, I can't get the old user profiles to appear as a choice on the screen to Log In, only the new profile and comments the user account. How can I recover the old option user profiles to connect?

  How can I recover the old option user profiles to connect?

  You can not. However, you can access the data stored in these profile files, if you are signed in under an administrator account.

• How to restore the old user profile

  I wanted to access some downloaded files that was stored in a temp folder. I did have access to this folder so I changed my folder option to be able to view hidden directories and files. He said that I had to be an administrator to do and I said OK. He then proceeds to change the attributes on thousands of files. In the end, I got is more access to my file and the original files, I became a new person, so to speak. I can manually view my old records, but I want to restore my old user profile, because this new profile is created a lot of problems with previously installed programs. I have two NTUSER. DAT files in my user C:\User\John folder. The dates are when the computer has been initially implemented 16/08/2012 and when the profile changes yesterday 07/02/2013. How to restore the old profile (from 16/08/2012)?

  Thank you

  Johnny

  Hi Johnny,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with the restoration of the old user profile.

  1 have been connected as a standard user?

  2. What are thousands of files you're talking about if you want to have access to the temporary folder?

  This problem can occur because of corruption of the user profile.

  Method 1: delete the new NTUSER. DAT folder and check if it helps.

  Method 2: Perform the System Restore to an earlier date and check if it helps.

  System restore

  Answer to us if you are having problems with the user profile or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have an old profile put in place which is bad I want to transfer files from the old user profile to a new user profile can I do it.

  The old profile has been altered not allowing the installation of msn.  We have created a new profile and msn installed and working properly.  I can move my files from the old profile to the new.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile shows how to do this. You need an administrator account to run the copy of the third.

• New user needs access to the old user profile files

  Windows 7 Pro on a W2008 domain, the latter leaves the company; User_B will take his place and needs access to all files (including e-mail - WindowsLiveMail);  There are currently three email accounts configured in the profile of the latter.  What is the best way to give User_B access to the data?  I tried to copy the data from the profile folder to the folder profile User_B, but when I try to open a document (Office 2002), I get "there was a problem sending the command to the program".

  When I tried to copy the profile via the control panel... Settings, user profiles, the option "copy to" was not available.

  There must be a relatively simple way to do this.  Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Pavilion Slimline 400-314: cannot delete the renamed user profile

  Greetings!

  I've been enjoying the nuances of Windows 8.1... right.  In any case, I have Win8.1 64-bit on this excellent HP SLimline PC.  Now, I need help with the operating system.  I am an avid user of Windows 7 and like it a lot. My four PC's the only one with 8.1 and I have some learning curve experiments, of which this is one.

  So, I got this computer since July 2014 and did not otherwise than with the administration of the accounts.  The problem is that the account administrative principal (Yes, I use two accounts, one for the daily work and an administrator account to manage the computer - life is safer like that).

  The username admin account had to be changed, so I did.  You would think that changing the name of the account automatically would do this in all areas of the system filiing.  In this case, not so much.  WIN8.1 has created a new profile.

  I'm not saying that the name of the profile has not changed for purposes of connection, he fact and that seems fine.  However, looking at the users listed in the Explorer file and also on the network, the old user profile still exists with all rights and privileges of the Administrator profile normal.

  I think that's not good for two reasons; It is confusing on the network. It also creates a set of accessible files because there is no way to connect to clean.  And it may pose a security problem.

  Also, note that has not degraded the function of the computer, but it appears sometimes in unpredictable circumstances.

  What have I done to alleviate this problem?   Initially took a chance on system restore. I do not have a restore point will go back far in time to correct it.  Then I tried the old "select and delete" some content. Not a good idea and the system let me not in all cases.  I don't know that it needs to be done by the operating system.  I'm not sure I want to change the registry immediately, but maybe it's my only choice.

  So, I'm at a stand still for the resolution. Not wanting to rebuild the computer, I need a way to rub user profiles and delete the one which is supposed to be deleted.

  As always, thanks to all those who can suggest a positive way to correct this problem. It's probably very easy... maybe

  Banhien... Thanks for all your help in this matter.  Between your good suggestions and a little thought on my part, I was able to remove the 'extra' account on the computer.  To change the standard account using your idea was the key, except in this case, it was a little more complex.

  Note that there are only meant to be two accounts on this computer.  Here's what I had to do:

  1 log on as an administrator.

  2. change the administrator account.

  3 Rename the account administrator to the name that it was before I renamed it and capture a standard user.

  4 restart the computer (even if it is perhaps not necessary, just a good idea so that everything lines up again)

  5. open a session under the 'new' admin account (that I changed standard user)

  6. remove the standard account renamed and all of its associated files.

  7. create a new Admin account as the administrator

  8 change the original standard user, turned administrator, standard user feedback.

  Now, I'm back for two accounts;  an administrator account and a Standard user account.

  Restarted the computer.

  Set up the 'new' account of the administrator

  Thanks again for your help. Have a great day.

• game fails ready to load into the Media Center tv installation procedure

  game fails ready to load into the Media Center tv installation procedure

  Hi Doug5745,

  Welcome to the community Microsoft and thanks for posting the question. Looks like you have a problem with playing loan in Windows Media Center, check out the following steps:

  Method 1:

  You may need to install Microsoft Silverlight on the computer, I'd say you install latest Silverlight and check if you are able to use play on Media Center loan.

  Silverlight

  http://www.Microsoft.com/Silverlight/

  Method 2:

  If this fails to solve the problem, I suggest you to post the question in this forum to improve assistance:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114.aspx

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• cannot access windows in safe mode because the keyboard is disabled until windows is loaded into the system

  I installed a keyboard wrong driver and now my winxp support with virtually no feature mouse or the keyboard, both frozen. I can't even load windows in SafeMode to solve my problem of driver, because my keyboard lights up until windows is completely loaded into the system. And it was actually a plu problem that I don't take care off the coast in time... Now, I was struck with a bigger question. Any suggestions from anyone, I appreciate it, thanks.

  I have windows xp pro sp3

  Can enter you the BIOS setup? I remember that my system has recognized a key led even with disabled USB legacy support. Then you can activate the support legacy USB in the BIOS. In time, you have to press F8 for safe mode there is normally no active driver at all, everything is managed by the BIOS. Another possible solution would be using a PS/2 keyboard...

• Can photos and music will be loaded into the memory of the dashboard?

  Can photos and music will be loaded into the memory of the dashboard?

  Hello Tom,

  The internal memory of the Dash device is not accessible to the user. Therefore, pictures and music files cannot be uploaded to the internal memory of the dashboard.

  However, the USB port on the Dash unit allows you to view photos or listen to music stored on a USB key.

  If my post answered your question, please mark it as an "accepted Solution".

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc